GTW06: telescopic sewer inspection camera with 12 inch touch screen, 10x zoom, 360°/180°, 2–5m pole, 2MP HD, IP68,…
| Controller screen | 12 inch touch screen, resolution 2000 × 1200 |
| Camera pixels | 2 Megapixels HD |
| Zoom | 10x auto zoom in/out |
| Camera head rotation | 360° continuous (infinite rotation) |
| Camera head tilt | 180° flip |
| Lighting | Own source, adjustable intensity |
| Water protection | IP68 waterproof |
| Pole length | 2–5 m (telescopic, adjustable) |
| Operating temperature range | -10°C → +50°C |
| Recording | Video + photos |
| Main applications | Pipes, large tanks, drainage channels, tunnels |
GTW06 telescopic sewer inspection camera: the portable system with an adjustable 2–5m telescopic pole for HD visual inspection of pipes, drainage channels, industrial tanks and tunnels without personnel entering the space. With a 12 inch touch screen, 10x optical zoom, infinite 360° rotation and 180° tilt, this telescopic sewer inspection camera gives the operator complete control of the image from the surface, regardless of the depth and type of inspected space.
The 12 inch touch screen of this telescopic sewer inspection camera, the largest in the category of Jiutai telescopic pole systems, allows detailed viewing of the Full HD image directly in the field without connecting an external monitor. The pole adjustable from 2m to 5m covers the standard depths of manholes, sewer basins and tunnel accesses in urban infrastructure, with continuous adjustment to the optimal length for each inspection point. Key Advantages of the GTW06 Telescopic Sewer Inspection Camera
• 12 inch touch screen, the largest in the telescopic pole category: The 12 inch touch screen with 2000×1200 resolution delivers the HD image at an enlarged size, directly visible in direct outdoor light. Compared with the 7 inch screens of other portable systems, this telescopic sewer inspection camera allows reading defect details without looking away from the screen or using a sunshade, essential when the operator holds the pole with one hand and controls the camera with the other.
• 10x zoom, close-up on defects deep in the manhole: The 10x optical zoom allows detailed documentation of defects on the floor of the manhole, the lateral connections and the joints from depths of 2–5m without lowering the camera below the level of the access opening. Cracks, infiltration and deposits on internal surfaces become visible and photographable at maximum magnification from the surface position.
• Infinite 360° rotation + 180° tilt, complete coverage: The PTZ head rotates continuously 360° without angle limitation and tilts 180°, providing the complete image of any point inside the inspected manhole, channel or tunnel (vertical walls, floor, top cap and lateral connections) without repositioning the pole.
“allows detailed viewing of the Full HD image directly in the field without connecting an external monitor.”
• 2–5m telescopic pole, adjustable to the optimal depth: Unlike fixed poles that require additional extensions, the GTW06 telescopic pole adjusts continuously between 2m and 5m with locking at the desired length. A single system covers all depths in the 2–5m range without changing components or adding modular sections.
• IP68 waterproof, operable in manholes with residual liquid: Complete IP68 sealing allows this telescopic sewer inspection camera to be used in manholes with a high level of residual water, in stormwater drainage channels after rainfall and in basins with partial liquid content, without retracting the camera or stopping the session at the first contact with the water surface.
• Applicability for tunnels, an extension over standard pole cameras: The GTW06 is explicitly used for tunnel inspection, an application not documented for the GT75BXA or GTW106. The telescopic pole inserted through a lateral access opening allows viewing the cross-section of the tunnel and the condition of the interior lining without the inspection team entering the tunnel.
• Adjustable lighting with its own light source: The camera includes its own light source with adjustable intensity, adaptable to the size and type of the inspected space, from small manholes to large industrial tanks, without external lighting equipment.
• Portable and easy to transport, fast multi-point inspection: The compactness of the assembly and its low weight allow movement between several inspection points on the same day without a vehicle or special logistical support. A single operator manages the pole, the controller and the documentation of the entire session.
Technical Specifications: GTW06 Telescopic Sewer Inspection Camera
| Controller screen | 12 inch touch screen, resolution 2000 × 1200 |
|---|---|
| Camera pixels | 2 Megapixels HD |
| Zoom | 10x auto zoom in/out |
| Camera head rotation | 360° continuous (infinite rotation) |
| Camera head tilt | 180° flip |
| Lighting | Own source, adjustable intensity |
| Water protection | IP68 waterproof |
| Pole length | 2–5 m (telescopic, adjustable) |
| Operating temperature range | -10°C → +50°C |
| Recording | Video + photos |
| Main applications | Pipes, large tanks, drainage channels, tunnels |
Applications: The GTW06 Telescopic Sewer Inspection Camera in Practice
A GTW06 series telescopic sewer inspection camera is the standard tool of municipal teams of.
Systematic assessment of the condition of pipes and collectors.
Locating defects in process pipes in factories.
A telescopic sewer inspection camera from the GTW06 series is the standard tool of municipal maintenance teams that carry out routine inspections of manholes, collection basins and stormwater drainage channels. The 2–5m pole covers all standard depths in urban sewer infrastructure, and the 12 inch screen allows comfortable reading of the image without auxiliary equipment. One operator fully manages the session: the pole, the PTZ control and the video and photo documentation.
Civil construction contractors and infrastructure engineering firms use this telescopic sewer inspection camera for rapid tunnel and channel inspections, checking the condition of the lining, the joints and the interior drainage without mobilizing specialized confined space access teams. The 12 inch touch screen and the 10x zoom allow a complete visual assessment of the cross-section of the tunnel or channel from the access opening, with immediate photographic documentation of any defect or anomaly. Explore the full range of Uzinex industrial equipment for inspection solutions across all categories of pipes, manholes and confined spaces.
Industrial inspection companies use systems such as the GTW06 telescopic sewer inspection camera for the rapid assessment of the internal condition of tanks, containers and industrial spaces with limited access, without preparing confined space entry in accordance with safety procedures, ensuring compliance with international standards for video inspection of pipes and industrial spaces. How It Works: Workflow with the GTW06
• Adjusting the telescopic pole to the manhole depth: The operator extends the pole to the length corresponding to the depth of the inspection point, between 2m and 5m, and locks it. No additional extensions or modular components are needed for different depths within the 2–5m range.
• Lowering the camera through the access opening: The PTZ head descends through the access opening of the manhole or the entry port of the tunnel/tank. The operator remains at the surface and watches the live image on the 12 inch touch screen, without entering the space.
• PTZ inspection with 10x zoom and 360° rotation: The operator rotates the camera 360° at the desired inspection level and uses the 10x zoom to document areas with defects or anomalies. The 180° tilt allows complete viewing, a defining quality of this telescopic sewer inspection camera, from the same pole position.
• Photographing and video recording directly on the touch screen: Identified defects are photographed or video recorded using the buttons on the 12 inch touch screen. The data is saved to the storage unit for archiving and subsequent reporting.
• Retracting the pole and moving to the next point: The pole is retracted, collapsed to the minimum length of 2m and transported to the next inspection point. One operator can inspect several manholes or access points of the same sewer system on the same working day.
Frequently Asked Questions about the GTW06 Telescopic Sewer Inspection Camera
How does the GTW06 differ from the GTW106 Pro and from the GT75BXA?
The GTW06 is the standard telescopic sewer inspection camera in the pole range: 2MP, 10x zoom, 12 inch touch screen, 2–5m pole, no laser and no carbon fiber. The GTW106 Pro (periscope) brings 4MP, 30x optical zoom, 1kg carbon fiber, a 1.25–6m pole, an integrated laser and defogging, recommended for inspections with Ultra HD documentation and dimensional measurement requirements. The GT75BXA is the system for spaces up to 6000mm in diameter with dual 10x+10x zoom. The GTW06 is the balanced choice for routine inspections of standard manholes and tunnels. What maximum manhole depths can the GTW06 inspect?
The GTW06 telescopic pole covers depths from 2m to 5m from the level of the access opening. The 5m depth covers the vast majority of manholes in municipal sewer networks. For manholes deeper than 5m or for spaces with depths of 6m, the GTW106 Pro with the 1.25–6m pole is the appropriate solution. Can the GTW06 inspect tunnels or only manholes?
Yes, tunnels are explicitly mentioned in the list of applications of this telescopic sewer inspection camera. The pole inserted through a lateral or vertical access opening allows viewing the cross-section of the tunnel and the condition of the lining with the 10x zoom and 360° rotation, providing the complete image of the condition of the tunnel without the inspection team entering it. Is the 12 inch screen a touch screen or does it require physical buttons?
The 12 inch screen is a fully functional touch screen: all PTZ commands (rotation, tilt, zoom, lighting), photographing and video recording are operated directly by touch on the touch screen. No remotes or additional controllers are needed for the complete inspection. What are the operating temperature limits and does winter matter?
The GTW06 operates between -10°C and +50°C. At -10°C, the electronics and the battery operate within normal parameters, covering winter temperatures in Romania across all regions, except in extreme frost situations. For inspections at temperatures below -10°C (mountain areas or exceptional weather conditions), the GTW106 Pro with the -20°C specification is the appropriate choice. Why Buy the GTW06 Telescopic Sewer Inspection Camera from UZINEX?
• Free consultation for selecting the optimal model: The UZINEX team analyzes the typical depths of the manholes being inspected, the zoom and documentation requirements and recommends the GTW06 or the GTW106 Pro depending on the specifics of your inspection program and budget.
• Complete delivery ready to use: This GTW06 telescopic sewer inspection camera is delivered with the telescopic pole, the PTZ head, the 12 inch touch screen and all accessories, fully equipped from day one, with no additional components to purchase.
• Extended 60-month warranty and technical support under 36 hours: Every telescopic sewer inspection camera delivered through UZINEX benefits from a 60-month warranty and a guaranteed response time under 36 hours, ensuring the continuity of periodic inspection programs.
• Complementary to the range of CCTV crawlers: This GTW06 telescopic sewer inspection camera rapidly assesses the interior condition of the manhole from the surface; the CCTV crawlers in the Uzinex range inspect the pipe section between manholes. Together they provide the complete documentation of underground infrastructure for audits, acceptances and annual maintenance programs.
• Access to the entire Uzinex range for advanced needs: When inspection requirements evolve toward 4MP, 30x zoom or a measurement laser, the upgrade to the GTW106 Pro is available within the same range distributed by UZINEX, without losing the investment in the operating skills accumulated with the GTW06.
GTW06 telescopic sewer inspection camera: the balanced solution with a 12 inch touch screen, 10x zoom and 2–5m pole for teams that inspect manholes, tanks, drainage channels and tunnels daily, without personnel entering confined spaces and without the complexity of Pro systems with carbon fiber or laser, everything that makes a telescopic sewer inspection camera efficient for daily inspections.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
