UZX-077Baling presses
Vertical Hydraulic Baler
The vertical hydraulic baler is suitable mainly for compressing and packing used clothing, pap…
The complete flow of a waste-processing center: shredders (single-shaft with screen for controlled granulation, twin-shaft for bulky and tough waste, dedicated machines for whole tyres and scrap metal), vertical and horizontal baling presses, separators (including steel-wire separation after tyre shredding) and auxiliary line equipment. UZINEX designs the whole line on your real waste stream and supports it with sub-24h service and a 60-month warranty. Recycling lines are among the most financeable investments: leasing or EU funds, with the file prepared by our team.
The vertical hydraulic baler is suitable mainly for compressing and packing used clothing, pap…
The horizontal hydraulic baler is suitable mainly for compressing and packing used clothing, pa…
The metal baling press can cold-press, directly and without preheating, cast-iron chips in powder form, steel chips, c…
The shredder breaks materials into small pieces by shearing, squeezing and tearing them apart.
The stripper is a high-speed pneumatic device driven by an air motor that actuates…
UZX-ZY-VC vertical hammer shredder: 3 models 150–264kW (dual motor), 650–672 rpm, 800–3000 kg/h, 36 hammers 40kg + head…
UZX-HN-M dual-shaft shredder: 3 models 4kW–30kW, capacity 320–1200kg, heat-treated welded frame, PLC with reversal o…
UZX-ZY-S single-shaft shredder: 5 models 22–110kW, chamber 600–1500mm, rotor with V/spiral knives + discharge screen fo…
The UZX-ZY-KC plastic knife shredder shreds plastic waste at 300–1,200 kg/h, with a quick-change screen and a noise-damped chamber.
The UZX-ZY-HC hammer metal shredder processes scrap metal at 800–3,000 kg/h, with two motors of 75–132 kW.
UZX-ZY-SW steel wire separator: 4 models 30kW–132kW, 300–1800 kg/h, opening 600–1200mm, wear-resistant mobile+fixed blade…
The rubber granulator is an essential piece of equipment in the fully automatic used-tyre recycling line…
UZX-ZY-DT series whole tyre shredder: 3 models 60kW–180kW (twin motor), capacity 1–5 t/h, 3–8cm output granules,…
UZX-ZY-S series scrap metal shredder: models 22kW–110kW, chamber 600–1500mm, 800–3000 kg/h, Cr12MoV/D2 alloy steel blades, PL…
Vertical 30T hydraulic baling press: 15kW motor, 800×400×800mm chamber, bale 100–300kg, 4–6 bales/hour, compati…
URSTAG dual-shaft recycling shredder UZX-D600–UZX-D2200: 500–1200+ kg/h, 4 SKD11 HRC62 knife types, 25 min blade change,…
URSTAG single-shaft recycling shredder UZX-OS-600–1600: rigid plastic, PET, textiles, film, aluminium cans, injection burrs.
URSTAG tyre recycling shredder UZX-D600–UZX-D2200: all types (car, OTR, agricultural), automatic adaptation, rubber chips…
URSTAG plastic recycling crusher UZX-WGD-600–1200: alloy steel blades, ~1cm granules screen-controlled, automatic PLC,…
URSTAG metal recycling crusher UZX-WCD-800–2200: high-torque hammers, adjustable cubic particles, side doors…
URSTAG UZX-LCP-1000–1800 vertical metal recycling crusher: 3 methods (blades/hammers/chains), 500mm feed, high-chromium alloy ha…
URSTAG UZX-DF1500-I/II/2000-I/II electrostatic recycling separator: high-voltage field, dual stage, 99% purity, dry…
URSTAG UZX-FX600/800/1000/1200/1500 air recycling separator: aerodynamic principle, 95% light/heavy efficiency, zero cont…
URSTAG 400–1400 eddy-current non-ferrous metal separator | +30% recovery, 98% purity, 0–3000rpm rotor, rare-earth mag…
URSTAG gravity density recycling separator: air suspension, 50mm–200 mesh, 10× more efficient than manual, a…
URSTAG rotary trommel sorting screen: solves mesh clogging on wet materials, simple motor+gearbox structure…
URSTAG iron recycling magnetic separator: recovers steel, iron, cobalt, nickel; removes magnetic impurities from…
URSTAG industrial recycling conveyor belt: wear-resistant rubber, PVC, metal plates, heavy-duty steel frame, w…
URSTAG pulse dust collector for recycling, pulse self-cleaning, Directive 2004/37/EC, timer/pressure sensor. Dust capture for shredders and crushers.
Transforms washed PET flakes into food-grade R-PET pellets with controlled viscosity and stable color.
Transforms washed PET flakes directly into food-grade thermoforming sheet without intermediate pelletizing.
Increases intrinsic viscosity and purity of R-PET pellets for preforms, strapping and technical applications.
Rapidly increases PET viscosity directly in the melt phase without a cooling and reheating cycle.
Transforms post-consumer bottle bales into clean, dry PET flakes at capacities up to 6,000 kg/h.
Breaks PET down at molecular level and rebuilds it to virgin-equivalent quality.
Transforms waste tires into rubber chips, granules and powder, recovered steel and separated fiber.
High-torque, low-speed primary shredding for tires, rubber and bulky waste.
Transforms waste tires into TDF chips, wire-free mulch and recovered steel through a complete mechanical process.
Heavy-duty shredder engineered for steel-reinforced passenger car, truck and OTR tires.
Transforms tire chips into 10–15 mm granules and releases steel wire from rubber.
Transforms coarse rubber granules into a uniform fine fraction of 1–4 mm.
Transforms large tire volumes into TDF chips, steel-free mulch and recovered steel.
Transforms electronic waste into clean fractions of iron, aluminum, copper, plastic and glass.
Automatically recovers intact electronic components and prepares stripped boards for metal recovery.
Transforms circuit boards into copper-rich metal powder and resin and fiber powder.
Recovers iron, aluminum, copper and plastic from mixed electrical and electronic waste.
Processes circuit boards at industrial scale into copper-rich metal powder and non-metal powder.
Captures refrigerant and polyurethane gases while recovering metals, plastic and insulation foam.
Transforms waste printers and copiers into clean plastic, iron, aluminum and copper fractions.
Physically and irreversibly destroys hard drives, SSDs and other data media.
Recovers copper from circuit boards through a dry physical process, without chemicals.
Automatically recovers intact components and prepares stripped boards for metal recovery.
Transforms bulky wood into fine sawdust and clean wood chips, free of metal and with controlled dust.
Continuously processes complete pallets with nails into consistent, clean wood chips.
Separates waste cables into ≥99% pure copper granules and PVC granules.
Industrially processes bulky cables into ≥99% copper and PVC granules.
Mechanically strips thick cables while keeping the conductor intact.
Precise stripping for common installation, automotive and telecom cables.
Precise stripping for fine wires from electronics, motors and small installations.
Versatile stripper for mixed material: THHN, XLPE, PVC, rubber and construction cables.
Recovers copper from waste cables at around 99% purity through a dry process, without wastewater.
Medium-capacity model for separating copper and PVC granules through a dry process.
Wet separation with water spray for copper granules at maximum purity, around 99.9%.
Turns waste lithium batteries into high-purity black mass, copper and aluminum granules.
Controlled pyrolysis that removes electrolytes and PVDF for high-purity black mass.
Compact unit that safely processes LFP, NMC, 18650 and pouch under nitrogen protection.
Medium industrial capacity with N₂ shredding, pyrolysis and multi-stage dry separation.
Captures, purifies and reuses NMP from electrode dryers at ≥99% purity.
NMP recovery at industrial flow for high-capacity cathode coating lines.
Turns kitchen organic waste into usable compost in 24 hours, odor-free.
Processes restaurant kitchen waste in a few hours, odor-free and without leachate.
Compact, CE-certified composter for small canteens, boutique hotels and offices.
Set-and-forget operation: manages temperature, humidity, agitation and ventilation on its own.
Compact, quiet and odor-free electric composter for offices and small restaurants.
Uniformly turns and aerates compost in trenches, for fast aerobic fermentation.
Automatically controlled fermentation at industrial volumes, with documented-quality compost.
Turns raw compost into granular organic fertilizer, calibrated, dried and ready to package.
Continuous compost production at commercial volumes, for large farms and composting platforms.
Crushes motors and mixed metal scrap and automatically separates pure copper, iron and aluminum.
Complete industrial flow that shreds mixed metal scrap and separates pure metal fractions.
Impact crushing of scrap iron and bulky metal waste, with robust hammers.
Massive rotor and high-power motor for industrial crushing of scrap iron at high volumes.
Shreds end-of-life car bodies and automatically recovers steel, copper and aluminum.
Breaks up compacted aluminum bales into a free, uniform fraction ready for remelting.
Pre-compresses and shears bulky metal waste for uniform shredder feeding.
Optimized processing for thin sheet and car bodies, separating steel, copper and aluminum.
Complete turnkey solution: shredder, transport, separation and control, delivered as a working whole.
Versatile size reduction for scrap iron, e-scrap, steel, aluminum, copper and WEEE.
Tears used textile materials into reusable fiber for yarns, nonwovens and fillings.
Compact, affordable solution for tearing textile waste at small scale.
Tears polyester waste into recovered fiber for nonwovens, fillings and insulation.
Tears cotton waste into recovered natural fiber, preserving fiber length.
Openers and cleaners combined turn cotton waste into pure fiber, free of impurities.
Mini system that reproduces the industrial process at small scale for research, testing and samples.
Opening plus carding for neps-free fiber with excellent fiber effect, from spunlace and air-through waste.
Customizable configuration of multiple openers, adapted to the material and the desired fiber quality.
Professional opener dedicated to nonwoven edge trim, recovering clean fiber.
Crushes glass and automatically separates metals, labels and impurities for clean cullet.
Separates PVB film from glass in windshields and laminated panes, recovering both materials clean.
Separates glass cullet by color with cameras and sensors, for premium sorted cullet.
Complete integrated flow that separates waste glass by color and fraction, removing metals and impurities.
Dedicated cullet sorter that optically refines already-crushed cullet by color, for superior-quality cullet.
High-speed, high-capacity color cullet sorting with low good-glass rejection, at maximum yield.
Multi-channel optical sorter that separates cullet by color and removes impurities, configurable to requirements.
The first generations of solar panels are now reaching end of life, generating a valuable but hard-to-process waste stream.
Decommissioned solar panels hold valuable materials locked inside a laminated structure that is hard to separate.
The first link in any sorting plant: it takes waste from the reception hopper and delivers it to the line in a steady flow, with no surges and no blockages.
It opens household waste bags and releases the contents without shredding what is inside, so the sorting downstream can still recognise every fraction.
The most widely used screening machine in sorting plants: the inclined drum tumbles the waste and splits it into size fractions in a single pass.
The alternative to a classic screen where material is wet or sticky: the elastic discs are self-cleaning, so the screening surface does not clog.
One machine doing three separations at once: flat material travels up, rolling material rolls down, and the fine fraction falls through the perforations.
The screening machine for material the others cannot handle: wet, sticky and fibrous waste that would blind any classic screen within hours.
Screening into several fractions at once: the vibrating motor drives the material forward in a straight line while divergent bars loosen it so the deck is never covered.
It separates by density rather than size: the air stream carries film, paper and textiles away, while glass, metal and stone drop straight down.
It mounts above the belt and works on its own: it attracts iron out of the flow, and the ribs on its own belt discharge it sideways, continuously and without stopping.
The only machine that pulls aluminium and copper out of waste: the high-speed rotor induces currents in the metal, and the resulting field throws it clear of the flow.
It sees what the eye cannot: it identifies the polymer type and colour of every object in the flow, then separates it with an air jet, thousands of times a minute.
It learns from what it sees: the camera scans the belt, the algorithm recognises the material, the arm picks it up and drops it in the right bin, endlessly.
No machine catches quite everything. The sorting cabin is where human judgement completes the automation, in decent working conditions.
Without it, everything you sorted stays a loose pile that cannot be shipped economically. The baler turns loose material into dense, standardised, sellable bales.
The final stage that turns a cost into revenue: the fraction that would otherwise go to landfill becomes fuel sold to cement plants and power stations.
A full landfill is an untapped resource. The line recovers materials from old waste and gives you the space back.
Skid-mounted twin-shaft shredder, 110 kW electric, 20–150 t/h, 750 mm feed, output below 100 mm, 4 m³ hopper, 12 t, 8.5 m long.
Tracked twin-shaft shredder, Cummins 154 kW, 1200 × 1500 mm opening, Ø680 mm shafts, 160,000 N·m torque, 80–130 t/h C&D, 18 t.
Twin-shaft shredder on steel tracks, Cummins 264 kW, 7 m³ lift hopper, Ø730 mm discs, 240,000 N·m torque, 80–150 t/h, 28 t.
Tracked twin-shaft shredder, Cummins QSZ13 410 kW, 2000 × 2500 mm opening, 860 × 2500 mm shaft, 400,000 N·m torque, up to 200 t/h, 49 t.
Trailer twin-shaft shredder, Cummins 154 kW, 1200 × 1500 mm opening, 680 × 1550 mm shaft, 160,000 N·m torque, 80–130 t/h C&D, 18 t.