Uniformly turns and aerates compost in trenches, for fast aerobic fermentation.
| Type | Groove-type compost turner, rail-mountable |
| Groove width | Configurable according to the project (4 to 20 m typical) |
| Turning depth | Adjustable, up to 1.5 to 3 m depending on the model |
| Travel | Electric, on rails, automatic or remote-controlled |
| Rotors | With helical or radial paddles for intense aeration |
| Processed materials | Manure, sewage sludge, agricultural waste, organic waste |
| Motor | Electric, with a frequency inverter for speed adjustment |
| Components | With CE marking where applicable |
| Material | Notes |
| Cattle, pig, poultry manure | The main industrial application |
| Dewatered sewage sludge | Mixed with bulking material (straw, corn stalks) |
| Agricultural vegetable residues | Corn stalks, straw, vegetable scraps |
| Municipal organic waste | Pre-sorted, free of contaminants |
| Biogas digestate | Dewatered, mixed with bulking material |
Groove composting is one of the most widely used industrial methods for producing organic fertilizers: the materials to be composted are laid in grooves several tens of meters long, and a groove-type compost turner travels automatically on the rails mounted along the edges of the groove, turning and aerating the material at regular intervals and maintaining optimal aerobic fermentation conditions along the entire length of the groove.
A groove-type compost turner is the central piece of equipment of any production line for organic fertilizers from manure, sewage sludge, agricultural waste or municipal organic waste. Compared with manual turning or general-purpose machinery, a dedicated turner ensures uniform fermentation, temperature control and a much higher productivity per operator. See the full range of recycling equipment and the solutions for fertilizer production.
• Uniform turning along the entire length of the groove, mounted on rails, it ensures that every centimeter of material is turned and aerated uniformly, unlike manual turning.
• Automatic travel on rails, it moves on its own from one end of the groove to the other, without a permanent driver.
• Adjustable turning depth, the paddle rotors are adjusted for different material heights in the groove.
• Intense aeration, the paddles lift and loosen the material, introducing the fresh air needed by the aerobic bacteria.
• Temperature controlled through turning frequency, by programming the intervals, the fermentation temperature stays in the optimal range of 55 to 65°C.
• High productivity, one operator supervises several grooves at once, with no direct physical effort.
• Robust construction, designed for continuous operation in conditions of dust, humidity and abrasive materials.
• Lateral transfer available, on some models, the machine can be moved from one groove to another.
| Parameter | Value |
|---|---|
| Type | Groove-type compost turner, rail-mountable |
| Groove width | Configurable according to the project (4 to 20 m typical) |
| Turning depth | Adjustable, up to 1.5 to 3 m depending on the model |
| Travel | Electric, on rails, automatic or remote-controlled |
| Rotors | With helical or radial paddles for intense aeration |
| Processed materials | Manure, sewage sludge, agricultural waste, organic waste |
| Motor | Electric, with a frequency inverter for speed adjustment |
| Components | With CE marking where applicable |
A groove-type compost turner is used on farms producing organic fertilizers from cattle, pig and poultry manure, in sewage sludge composting stations, in agricultural waste management centers (corn stalks, straw, vegetable residues) and on municipal organic waste composting platforms. In all these applications, the volumes of material are large and manual turning or turning with non-specialized machinery is inefficient or impossible.
Producing organic fertilizers through groove composting with a turner is one of the established and European-regulated methods; a groove-type compost turner delivered in Europe is designed in accordance with the requirements of Directive 2006/42/EC on machinery. For complete solutions for organic fertilizer production lines, see also our complete industry solutions.
Aerobic fermentation in grooves with a turner produces a more uniform and faster compost than passive methods (windrow without turning or static pile composting). The sanitization temperature of 55 to 65°C, maintained for the appropriate duration through frequent turning, eliminates weed seeds, pathogenic bacteria and parasite eggs, producing a safe, quality compost for agricultural application.
The energy efficiency of an electric turner, compared with combustion-engine versions, is superior in covered composting halls: there are no combustion gas emissions inside, the energy cost is lower per kilowatt-hour than diesel, and maintenance of the electric motor is simpler than that of a diesel engine. Mains power through the flexible cable mounted on the base of the turner is the standard solution for covered grooves.
Designing a groove composting system includes the grooves themselves (reinforced concrete, with drainage at the base), the running rails mounted on the upper edges, the electrical infrastructure and the water supply system for adjusting humidity. A groove-type compost turner is delivered and installed together with the design of this infrastructure, sized for the volume and type of your materials.
One operator's productivity is much higher than with manual alternatives: a single operator can supervise several grooves of tens of meters at the same time, starting and stopping the turner from the control console or remotely, with no direct physical effort. This high productivity makes the system economically feasible even on medium-sized farms.
| Material | Notes |
|---|---|
| Cattle, pig, poultry manure | The main industrial application |
| Dewatered sewage sludge | Mixed with bulking material (straw, corn stalks) |
| Agricultural vegetable residues | Corn stalks, straw, vegetable scraps |
| Municipal organic waste | Pre-sorted, free of contaminants |
| Biogas digestate | Dewatered, mixed with bulking material |
1. The materials to be composted are laid in the fermentation groove in uniform layers.
2. The turner moves to the starting end of the groove on the running rails.
3. The rotors with helical paddles enter the material, lifting and mixing it intensely.
4. The turner advances gradually, turning all the material from one end of the groove to the other.
5. At the end of the pass, the turner automatically returns to the starting position or moves to the next groove.
6. The frequency of passes (one or more per day) is set according to the fermentation stage.
A correctly operated groove-type compost turner produces mature compost in 25 to 40 days, compared with 90 to 120 days for passive composting without turning. Compost maturity is tested through temperature, the C/N ratio and specific biological indicators.
What is the difference compared with windrow pile composting?
Groove composting with a groove-type turner is more efficient in terms of surface area used (more material per m²), easier to automate and better protected against weather conditions in covered halls. Windrow composting requires a machine with a larger wheelbase (or a self-propelled turner) and more free lateral maneuvering space.
How long does a complete fermentation cycle take?
A complete cycle takes 25 to 40 days, compared with 90 to 120 days for passive composting. The exact duration depends on the ambient temperature, the moisture of the material and the turning frequency. More frequent turning in the first two weeks accelerates fermentation the most.
What groove width does the equipment support?
Groove-type turners are configured for widths from 4 m up to 20 m or more. The width is chosen according to the volume of material and the available surface. The equipment is designed specifically for the width of the planned groove; subsequently changing the width is not possible without redesign.
Can it be moved across multiple grooves?
Yes, on models with lateral transfer. A transfer crane or a transverse travel platform allows movement from one groove to another, reducing the investment if not all the grooves need turning simultaneously.
URSTAG is a premium brand of recycling equipment, with over 15 years of experience. You don't just get a machine, you get a solution engineered by specialists, built from top-tier components and backed by a team that supports you from design through commissioning.
• European engineering, every machine and every complete line is designed by our engineering teams in Europe, with a focus on reliability, safety and energy efficiency.
• Premium components, we build on motors and automation from industry leaders: Siemens, Schneider Electric, ABB, WEG, SEW-Eurodrive, NORD Drivesystems and Bonfiglioli.
• Over 15 years of experience, we know how materials and machines behave in real-world operation, and we configure each solution for your flow and volume.
• New equipment, configured for you, we supply new units, made to order for your application, with complete technical documentation.
• Delivery, installation and training included, we handle transport, commissioning and operator training, with support throughout the equipment's life.
As a premium brand, URSTAG relies on European engineering, top-tier components and experience. You choose a partner that supports your production long term, with equipment built to run reliably in demanding industrial environments.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
