Set-and-forget operation: manages temperature, humidity, agitation and ventilation on its own.
| Control type | Fully automated: temperature, humidity, agitation, ventilation |
| Sensors | Temperature and humidity, with automatic real-time adjustment |
| Display and alarms | Status display, alarms on anomalies |
| Cycle | Short, varies with the type of input |
| Deodorization | Integrated system active throughout the cycle |
| Volume reduction | 80 to 90% |
| Capacity | Configurable according to the project |
| Components | With CE marking where applicable |
| Accepted material | Notes |
| Cooked and raw food scraps | Any kitchen scraps |
| Meat, fish, dairy | Processed correctly by the high temperature |
| Vegetables, fruit, peels | No restrictions |
| Bakery products | Bread, expired pastry |
| Biodegradable paper | Napkins, coffee filters |
An automatic food waste composter works on the "set and forget" principle: you load the organic kitchen scraps, press start, and the machine automatically manages temperature, humidity, agitation and ventilation throughout the processing cycle. At the end of the cycle, the compost is ready for discharge, with no intermediate intervention. It is the ideal solution for businesses with limited staff or with work schedules that do not allow active supervision of the process.
An automatic food waste composter with temperature and humidity sensors, with automatic parameter adjustment and status alarms, is more efficient than an equivalent manual composter: optimal composting parameters are maintained consistently, with no variations due to operator negligence or inexperience. The compost produced is more uniform and the cycle shorter than in manual processes. See the full range of recycling equipment and the solutions for organic waste.
• Fully automated control, it adjusts temperature, humidity, agitation and ventilation on its own; the operator does not intervene during the cycle.
• Optimal parameters maintained consistently, temperature and humidity sensors monitor continuously and adjust automatically, ensuring efficient composting regardless of input variations.
• Alarm and status display, if something goes out of parameters, the machine flags it automatically; the operator can check remotely or on the display.
• Shorter cycle than manual composting, the automatically optimized parameters shorten the cycle compared with manual or poorly controlled processes.
• Suitable for limited staff, it requires no dedicated or advanced-trained staff; any employee can load the machine.
• No odor, the integrated deodorization system removes odors throughout the automatic cycle.
• Volume reduction of 80 to 90%, the organic input drops dramatically, reducing collection frequency.
• Usable compost daily, at the end of each automatic cycle, the compost is available for use or storage.
| Parameter | Value |
|---|---|
| Control type | Fully automated: temperature, humidity, agitation, ventilation |
| Sensors | Temperature and humidity, with automatic real-time adjustment |
| Display and alarms | Status display, alarms on anomalies |
| Cycle | Short, varies with the type of input |
| Deodorization | Integrated system active throughout the cycle |
| Volume reduction | 80 to 90% |
| Capacity | Configurable according to the project |
| Components | With CE marking where applicable |
An automatic food waste composter is the choice of businesses that want the benefits of composting without the effort of manual supervision: hotels with a 24-hour schedule, hospitals with their own kitchen, food production businesses with limited operational staff, and educational facilities that want to demonstrate composting without involving staff in actively managing the parameters.
Automation solves the most common problem of semi-manual composters: the variability in the quality of the compost produced from one cycle to the next, caused by differences in the attention and experience of successive operators. An automatic composter produces compost at a documentable and consistent quality batch after batch, valuable for businesses that use the compost as an agricultural soil amendment or that deliver it with defined specifications. The relevant European directive is Directive 2008/98/EC on waste. For complete solutions, see also our complete industry solutions.
The connectivity of a modern automatic composter, through a local display or, on advanced models, through an app or web interface, allows monitoring of the status and cycles without being physically present next to the equipment. The business manager can check whether the cycle ran correctly, how many kilograms were processed and whether there are any alerts, from a simple interface.
Compost quality depends primarily on the parameters maintained throughout the cycle: the optimal temperature of 55 to 70°C ensures sanitization and maximum microbial activity, the right humidity provides a favorable environment for the aerobic bacteria, and uniform agitation eliminates the anaerobic zones where odors form and reactions slow down. Automation maintains all these parameters simultaneously, something difficult to achieve manually.
The durability of an automatic composter is superior to that of non-automated models: the system adjusts automatically and prevents the overheating, overloading or excessive drying that damage mechanical components. Operating within optimal parameters reduces accelerated wear and extends the equipment's service life compared with a carelessly operated composter.
An automatic composter installed within a broader organic waste management system can be connected to the business's reporting systems: the quantities processed, the sanitization temperatures reached and the compost quality can be recorded and reported automatically for sustainability certifications or for compliance with programs required by local authorities.
| Accepted material | Notes |
|---|---|
| Cooked and raw food scraps | Any kitchen scraps |
| Meat, fish, dairy | Processed correctly by the high temperature |
| Vegetables, fruit, peels | No restrictions |
| Bakery products | Bread, expired pastry |
| Biodegradable paper | Napkins, coffee filters |
1. Organic scraps are loaded into the processing chamber.
2. The operator starts the cycle; the automatic system takes full control.
3. Sensors monitor temperature and humidity; the system adjusts agitation and ventilation in real time.
4. The temperature rises to 55 to 70°C; aerobic bacteria break down the organic matter at optimal speed.
5. The exhaust air passes through the integrated deodorization filter throughout the cycle.
6. On completion, the display or alarm signals that the compost is ready for discharge.
An automatic composter completes the cycle without any intervention from the moment it starts. Staff can carry out other activities; the machine works autonomously and signals only if it needs attention.
What does "automatic" actually do?
The automatic system maintains temperature, humidity, agitation and ventilation at optimal values throughout the cycle, with no manual intervention. If the humidity drops, the machine adds water; if the temperature rises too much, ventilation intensifies. The operator loads the scraps and starts the cycle; the rest is managed automatically.
Can it run at night without supervision?
Yes. It is designed for uninterrupted operation, including at night. Alarms signal through the display or, on advanced models, through a remote notification, if a problem arises. Nighttime operation is one of the main advantages over semi-manual models.
What training do staff need?
Minimal training: how to load the material, how to start the cycle and how to collect the compost at the end. The automatic system handles everything else. Any employee capable of operating a household appliance can operate the machine correctly after 30 minutes of hands-on instruction.
Is the automatically produced compost better quality than manual compost?
Generally, yes. The optimal parameters maintained consistently by automation produce a more uniform, better-sanitized compost with more consistent maturity than a manual process with operator variability. This is the most important practical difference compared with non-automated composters.
URSTAG is a premium brand of recycling equipment, with over 15 years of experience. You don't just get a machine, you get a solution engineered by specialists, built from top-tier components and backed by a team that supports you from design through commissioning.
• European engineering, every machine and every complete line is designed by our engineering teams in Europe, with a focus on reliability, safety and energy efficiency.
• Premium components, we build on motors and automation from industry leaders: Siemens, Schneider Electric, ABB, WEG, SEW-Eurodrive, NORD Drivesystems and Bonfiglioli.
• Over 15 years of experience, we know how materials and machines behave in real-world operation, and we configure each solution for your flow and volume.
• New equipment, configured for you, we supply new units, made to order for your application, with complete technical documentation.
• Delivery, installation and training included, we handle transport, commissioning and operator training, with support throughout the equipment's life.
As a premium brand, URSTAG relies on European engineering, top-tier components and experience. You choose a partner that supports your production long term, with equipment built to run reliably in demanding industrial environments.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
