UZX-015Door machining centers
Four-Side Door Cutting Machine with Automatic Loading and Unloading
The four-side cutting machine with loading and unloading is ideal for any business that produces doors o…
CNC door centers automate the most time-consuming operations in door production: hinge recess milling, lock mortising and multifunction edge machining, recipe-programmed per door model, so series changeover takes minutes.
The four-side cutting machine with loading and unloading is ideal for any business that produces doors o…
This multifunctional CNC machining center is the perfect solution for manufacturing wooden doors, offering pre…
Automatic door leaf line: loading, four-side cutting and edge banding, buffer storage, end holes and slots, double-face engraving, recesses, inspection.
Automatic line for door leaf frames in LVL or solid wood: finger jointing, cutting in sets, assembly, double-face nailing, labelling, 40–60 s/frame.
Flexible machine for LVL strips: automatic loading, finger milling at both ends, 90° turn, glue, jointing, grooved cutting, 10 s per 2 pieces.
Flexible machine for LVL and solid wood strips: lengthening by nailed joints, cutting to length with anti-deformation grooves, distribution in sets.
Two-station CNC door panel engraving machine, mirror engraving of both panels of one door at once, through-feed loading and unloading.
Automatic line for laminated door leaves: glue application, robot lay-up of faces and cored frame, 38 s per leaf.
Automatic door leaf packing line: loading, dusting, cleaning and inspection, film or foam, corner guards, carton cut to size, tape, label, strapping, unloading.
CNC centre for doors, wall panels and cabinets, parts up to 3000 × 1200 × 60 mm, 5.5 kW saw, 9.5 kW tool-change spindle, 12-tool magazine, 38 kW.
CNC centre for door leaves of 1600–2600 or 3000 mm, 280–1200 mm wide, 9.5 kW tool-change spindle, horizontal double spindle, 12-tool magazine, 31 kW.
CNC centre with two 9.5 kW spindles, top and bottom, double-face door leaf engraving at once, 4 + 4 tools, leaves of 1800–2400 or 3000 mm, 24 kW.
CNC centre for door leaves of 1800–2400 or 3000 mm, surface milling and glass openings, 9.5 kW spindle, 12-tool magazine, 23 kW.
CNC four-edge saw for door leaves of 1800–2400 or 3000 mm, three 7.5 kW saws with scoring, automatic centring, offcut shredding, 37 kW.
CNC saw for door leaves of 1800–2400 or 3000 mm, four 7.5 kW saws and four 0.75 kW scoring saws, optional rebating, 46 kW.
CNC machine for lock and hinge recesses on door leaves of 1800–2400 or 2800 mm, 600–1100 mm wide, 8 m/min, 8 kW.
CNC machine for lock and hinge recesses on both long edges at once, doors of 1800–2400 or 3000 mm, 300–1100 mm wide, 60 m/min, 31 kW.
Hardware unit for door leaves of 1800–2600 or 3000 mm, 400–1100 mm wide, lock, hinges, rollers, bolts, logo, viewer, 25 kW (S4026) or 30 kW (S5026).
CNC unit for door leaf edges: seal grooves on three edges, rebates for invisible doors, top wheel slot, bottom holes and slots.
CNC machine for the top and bottom edges of door leaves of 1800–3000 mm, 400–1100 mm wide, 80 mm depth, 8.5 kW (HK1) or 14 kW (HK2).
Machine for auxiliary painting holes at the ends of door leaves of 1800–2400 mm, 500–1100 mm wide, 320 mm hole spacing, custom on request.
CNC machine for the aluminium plates of aluminium-wood doors: double-end sizing and V-groove milling.
CNC line for assembled door rails: feed, cutting in sets, turning, centring, holes, dowels, slots, end painting and UV drying, glue, 12 s/piece.
CNC line for stiles of assembled doors: cutting in sets, holes, lock, hinge and logo recesses, hole cleaning, glue, 30 s/set.
CNC machine with six independent stations for grooves and holes on rails and stiles of assembled doors, left-right double spindles, automatic lubrication.
Automatic door frame line: scanning, glue, door stop fitting, pressing and nailing, 45°/90° cutting, lock and hinge recesses, 30, 40, 60 or 90 s cycle.
CNC machine for frames of 600–2600 or 3000 mm, 90–350 mm wide, 28–55 mm thick, 45°/90° cutting, recesses, steps, architrave groove, 25 kW.
CNC machine for frames of 600–2600 or 3000 mm and L-architraves with a 40–70 mm base, 45°/90° cutting, recesses, steps, grooves, 25 kW.
CNC machine for recesses on frames and door leaves of 1800–2600 mm, 100–1100 mm wide, 20–70 mm thick, left-right milling, 22 kW.
CNC machine for lock and hinge slots on frames of 1800–2600 or 3000 mm, 100–350 mm wide, 20–50 mm thick, 12 kW.
CNC machine for frames of 650–2400 or 3000 mm, 90–350 mm wide, 28–40 mm thick, double-end 45°/90° cutting, step milling, 20 kW.
CNC double-end saw for door frames, cutting both ends, automatic 45°/90° switching, barcode or manual input, roller table.
CNC machine for the head and jambs of frames with architrave, 45°/90° double-end cutting, U-cut without chipping, connecting holes, laser positioning.
Automatic machine for the rubber seal of frames of 600–3000 mm, 90–450 mm wide, 28–55 mm thick, 2 or 4 channels, 1.76 kW.
CNC line milling and folding decorative panels into profiles: frames, L-architraves, stops, skirting, panels; 2000–3050 mm long, 20–30 m/min.
Automatic machine for L-architraves: 12–25 mm base board, 900–2400 mm long, 15–50 mm side, single or double rounding, grooves, 24 m/min.
CNC saw for L-architraves of 600–3000 mm, 40–80 mm wide, 45°/90° cutting, joint step, 2 or 4 pieces at once, 10–20 m/min.
CNC saw for the glass-holding beads of door leaves, cutting to size at 45°, 16 pieces at once.
Machine for cutting thin PVC and melamine film rolls into small rolls, 1300 mm maximum length, 400 mm maximum roll diameter, 150 or 75 mm core.
Two-station CNC machine for cabinet doors: hinge recesses, end holes and slots, automatic loading and unloading.