UZX-177Separation equipment
Electrostatic Recycling Separator | UZX-DF1500/2000 | 99% Purity | Dual Stage | PCB
URSTAG UZX-DF1500-I/II/2000-I/II electrostatic recycling separator: high-voltage field, dual stage, 99% purity, dry…
Separators extract the valuable fractions from shredded streams: magnetic separation for ferrous metals, dedicated steel-wire separators (for example after tyre shredding) and rotary screens for size sorting, integrated downstream of the catalog shredders.
URSTAG UZX-DF1500-I/II/2000-I/II electrostatic recycling separator: high-voltage field, dual stage, 99% purity, dry…
URSTAG UZX-FX600/800/1000/1200/1500 air recycling separator: aerodynamic principle, 95% light/heavy efficiency, zero cont…
URSTAG 400–1400 eddy-current non-ferrous metal separator | +30% recovery, 98% purity, 0–3000rpm rotor, rare-earth mag…
URSTAG gravity density recycling separator: air suspension, 50mm–200 mesh, 10× more efficient than manual, a…
One machine doing three separations at once: flat material travels up, rolling material rolls down, and the fine fraction falls through the perforations.
It separates by density rather than size: the air stream carries film, paper and textiles away, while glass, metal and stone drop straight down.
It mounts above the belt and works on its own: it attracts iron out of the flow, and the ribs on its own belt discharge it sideways, continuously and without stopping.
The only machine that pulls aluminium and copper out of waste: the high-speed rotor induces currents in the metal, and the resulting field throws it clear of the flow.
It sees what the eye cannot: it identifies the polymer type and colour of every object in the flow, then separates it with an air jet, thousands of times a minute.
It learns from what it sees: the camera scans the belt, the algorithm recognises the material, the arm picks it up and drops it in the right bin, endlessly.