Transforms electronic waste into clean fractions of iron, aluminum, copper, plastic and glass.
| Process type | Mechanical WEEE recycling: shredding and separation |
| Feedstock | Household appliances, IT equipment, small electronics (WEEE) |
| Shredding | Shredder / hammer mill for volume reduction |
| Ferrous separation | Magnetic separators |
| Non-ferrous separation | Eddy current separators (aluminium, copper) |
| Fine separation | Density / air separation and dust extraction |
| Recovered products | Iron, aluminium, copper, plastic, glass, fraction rich in precious metals |
| Components | CE marked where applicable |
| Capacity | Configurable to the project |
| Accepted material | Notes |
| Large household appliances | Washing machines, ovens, without refrigerant |
| IT and telecom equipment | Computers, servers, phones, peripherals |
| Small electronics | Consumer devices and small household appliances |
| Extracted electronic boards | Directed to the precious metals recovery flow |
This URSTAG e-waste recycling machine line takes end-of-life appliances through to clean metal, plastic and glass fractions. The material is shredded, then passes magnetic, eddy current and density separation, which recover iron, aluminium, copper and the precious metals in circuit boards, with dust extraction along the whole flow.
• Complete, modular line, an electronic waste recycling plant links shredding, magnetic separation, non-ferrous separation and sorting into a single chain, configured to the type of waste.
• Metal recovery from electronics, the separators extract iron, aluminium and copper, and the board fraction concentrates precious metals such as gold, silver and palladium.
• Mechanical process, material recovery is done physically, through shredding and separation, with no wet processes in the basic stages.
• Several salable fractions, iron, aluminium, copper, plastic and glass, each with its own market, plus a fraction rich in precious metals.
• Dust extraction system, dust suction and filtration keep a clean working environment and capture the fine, valuable powders.
• Scalable capacity, the plant is sized from a starter line up to an industrial unit, adding stages as volume grows.
• Sorting by type, the flow accepts large household appliances, IT equipment and small electronics, after an initial sorting and pre-treatment.
• Real payback, from hazardous waste you get secondary raw materials in demand on the market, shortening the investment recovery period.
| Parameter | Value |
|---|---|
| Process type | Mechanical WEEE recycling: shredding and separation |
| Feedstock | Household appliances, IT equipment, small electronics (WEEE) |
| Shredding | Shredder / hammer mill for volume reduction |
| Ferrous separation | Magnetic separators |
| Non-ferrous separation | Eddy current separators (aluminium, copper) |
| Fine separation | Density / air separation and dust extraction |
| Recovered products | Iron, aluminium, copper, plastic, glass, fraction rich in precious metals |
| Components | CE marked where applicable |
| Capacity | Configurable to the project |
An electronic waste recycling plant serves authorized recyclers, waste management operators and investors who want to enter a rapidly growing market. Electronic waste contains valuable secondary raw materials: iron, aluminium, copper, plastic and glass, plus precious metals in the boards. For an operator, that means several revenue streams from a waste that would otherwise be a disposal cost.
The management of this waste is strictly regulated in the European Union by Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), which requires proper collection and treatment. For integration into a complete line, see also the complete solutions by industry.
The materials recovered by an electronic waste recycling plant go directly into industry: iron to steel mills, aluminium and copper to smelters, plastic into regranulation, and the fraction rich in precious metals to refining for the extraction of gold, silver and palladium. For an investor, the ability to deliver several clean fractions at once opens contracts in different industries and stabilizes demand throughout the year.
The volume of electronic waste is growing rapidly, while the recycling rate is still low compared with European targets, which means an abundant raw material and an expanding market. A correctly sized electronic waste recycling plant positions you exactly at the meeting point between a legal treatment obligation and a real economic opportunity, with support from extended producer responsibility schemes.
In addition, recovering metals from WEEE reduces dependence on mining and on the import of critical raw materials, an argument that is increasingly important for authorities and for industrial customers. A plant that efficiently recovers copper and precious metals contributes directly to the circular economy and can access contracts with manufacturers who commit to recycled-material targets.
An electronic waste recycling plant processes a wide range of WEEE, after an initial sorting by type and the extraction of hazardous components. Refrigeration equipment and cathode-ray-tube devices are treated on dedicated flows, and batteries and electronic boards are extracted before the general shredding. The better the input sorting, the cleaner the recovered fractions.
| Accepted material | Notes |
|---|---|
| Large household appliances | Washing machines, ovens, without refrigerant |
| IT and telecom equipment | Computers, servers, phones, peripherals |
| Small electronics | Consumer devices and small household appliances |
| Extracted electronic boards | Directed to the precious metals recovery flow |
The flow on an electronic waste recycling plant is continuous, automated and mechanical, from the device to clean fractions:
1. The WEEE is sorted by type, and the hazardous components (batteries, refrigerants, boards) are extracted.
2. The material is shredded in a shredder or a hammer mill, reducing the volume and freeing the materials.
3. A magnetic separator extracts the ferrous fraction (the iron) from the shredded flow.
4. The eddy current separator detaches the non-ferrous metals, aluminium and copper, from the rest of the materials.
5. Density and air separation splits the plastic, the glass and the residual fractions.
6. The fractions are collected separately, and the dust extraction system captures the fine, valuable powders.
Each stage is sized to work with the next, for fractions as pure as possible. A continuously monitored electronic waste recycling plant keeps a constant quality and quickly brings a new operator to stable results, a real advantage in plants with staff turnover. The control system signals deviations and allows planned maintenance without long production stops.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.