Recovers iron, aluminum, copper and plastic from mixed electrical and electronic waste.
| Process type | Mechanical WEEE recycling: shredding and separation |
| Feedstock | Household appliances, IT equipment, consumer devices |
| Shredding | Metal shredder, hammer mill or vertical shredder |
| Ferrous separation | Magnetic separators |
| Non-ferrous separation | Eddy current separators (aluminium, copper) |
| Fine separation | Density / air separation |
| Recovered products | Iron, aluminium, copper, plastic |
| Components | CE marked where applicable |
| Capacity | Configurable to the project |
| Accepted material | Notes |
| Large household appliances | Washing machines, ovens, without refrigerant |
| IT and telecom equipment | Computers, servers, peripherals |
| Consumer devices | Small electronics and household appliances |
| Hazardous components | Batteries and boards extracted on dedicated flows |
This URSTAG WEEE recycling plant for mixed streams recovers ferrous and non-ferrous metals from appliances, IT equipment and consumer electronics. The material is shredded by a metal shredder, hammer mill or vertical shredder, then separated magnetically and by eddy current into iron, aluminium, copper and plastic, with machines sized to your e-waste recycling mix.
• Ferrous and non-ferrous recovery, a WEEE recycling plant extracts the magnetic iron, then the aluminium and copper with the eddy current separator.
• Robust shredding, the metal shredder or the hammer mill reduce the volume and free the materials for separation.
• High-purity fractions, the recovered metals are clean and directly salable to smelters and steel mills.
• Customization by type, the configuration adapts to large household appliances, IT equipment or consumer devices.
• Plastic separation, density and air separation recovers the plastic fraction for regranulation.
• Dust extraction system, dust capture and filtration keep a clean and compliant working environment.
• Compliant with WEEE legislation, designed to meet the requirements of the European directive on electronic waste.
• Scalable capacity, the plant grows from a starter line up to an industrial unit, stage by stage.
| Parameter | Value |
|---|---|
| Process type | Mechanical WEEE recycling: shredding and separation |
| Feedstock | Household appliances, IT equipment, consumer devices |
| Shredding | Metal shredder, hammer mill or vertical shredder |
| Ferrous separation | Magnetic separators |
| Non-ferrous separation | Eddy current separators (aluminium, copper) |
| Fine separation | Density / air separation |
| Recovered products | Iron, aluminium, copper, plastic |
| Components | CE marked where applicable |
| Capacity | Configurable to the project |
A WEEE recycling plant serves authorized recyclers and operators who receive large flows of household appliances and electronic equipment. This waste contains iron, aluminium, copper and plastic in significant quantities, secondary raw materials with steady demand on the market. For an operator, the clean recovery of these metals turns bulky, hazardous waste into stable revenue streams.
The management of this waste is regulated in the European Union by Directive 2012/19/EU on WEEE, which requires proper collection and treatment. For integration into a complete line, see also the complete solutions by industry.
The materials recovered by a WEEE recycling plant go directly into industry: iron to steel mills, aluminium and copper to smelters, and the recovered plastic into regranulation. The electronic boards extracted before shredding can be directed toward a dedicated precious metals recovery flow. For an operator, the ability to deliver clean fractions opens direct contracts with processing industry, at better prices.
The volume of WEEE grows year after year, and Romania, as a member state of the European Union, has clear collection and recycling targets. A correctly sized WEEE recycling plant positions you exactly at the meeting point between a legal obligation and an economic opportunity, with support from extended producer responsibility schemes, which finance the treatment of this waste. This financing ensures a steady flow of material toward authorized treatment units and a predictable demand for the installed capacity.
In addition, recovering metals from WEEE reduces dependence on mining and on the import of raw materials, an argument that is increasingly important for authorities and for industrial customers. A plant that delivers clean iron, aluminium and copper contributes directly to the circular economy and can access contracts with manufacturers who commit to recycled-material targets in their products.
Customization by type is a major practical advantage: a line set up for large household appliances differs from one for IT equipment, and the correct sizing of the shredding and separation makes the difference between clean, well-paid fractions and a mixed material that is hard to sell. A WEEE recycling plant adapted to your flow maximizes both the purity and the value of the recovered fractions, which is directly reflected in the price obtained from buyers.
A WEEE recycling plant processes a wide range of electronic waste, after an initial sorting and the extraction of hazardous components. Refrigeration equipment and cathode-ray-tube devices are treated on dedicated flows, and batteries and electronic boards are extracted before the general shredding. The better the input sorting, the cleaner the recovered fractions.
| Accepted material | Notes |
|---|---|
| Large household appliances | Washing machines, ovens, without refrigerant |
| IT and telecom equipment | Computers, servers, peripherals |
| Consumer devices | Small electronics and household appliances |
| Hazardous components | Batteries and boards extracted on dedicated flows |
The flow on a WEEE recycling plant is continuous, automated and mechanical, from the device to clean fractions:
1. The waste is sorted, and the hazardous components (batteries, boards) are extracted before shredding.
2. The material is shredded in a metal shredder, a hammer mill or a vertical shredder.
3. A magnetic separator extracts the ferrous fraction from the shredded flow.
4. The eddy current separator detaches the aluminium and copper from the rest of the materials.
5. Density and air separation splits the plastic and the residual fractions.
6. The fractions are collected separately, and the dust extraction system captures the fine powders.
Each stage is sized to work with the next, for fractions as pure as possible. A continuously monitored WEEE recycling plant keeps a constant quality and quickly brings a new operator to stable results, a real advantage in plants with staff turnover. The control system signals deviations and allows planned maintenance without long production stops.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.