Robust primary shredding at low speed and high torque.
| Machine type | Twin-shaft shredder with independently driven shafts |
| Drive | Separate hydraulic or electric motors |
| Blades | D2 or Hardox, heat-treated and removable |
| Output size | Determined by the blade thickness |
| Operating mode | Low speed, high torque |
| Jam protection | Automatic reversal |
| Accepted material | Notes |
| Wood pallets | Including with nails or small straps |
| Furniture scraps | Solid wood, particle board and MDF |
| Construction waste | Beams, boards and joinery |
| Small logs and branches | Volume reduction |
If you receive bulky wood waste, a twin-shaft wood shredder with independent drive is well suited to the first stage. The two shafts are driven by separate motors, each with high torque and low speed, and the D2 or Hardox blades are individually removable.
The machine runs with low noise and dust, withstands minor metal impurities and automatically reverses direction on overload. See the full range of recycling equipment.
• Independent drive, each rotor has a separate motor.
• D2 / Hardox blades, heat-treated blades, individually replaceable.
• Low speed, high torque, low noise and dust.
• Active pull-in, the rotors pull the material into the shredding chamber.
• Automatic reversal, fast recovery on jam.
• Sealed bearings, protection and easy maintenance access.
| Parameter | Value |
|---|---|
| Machine type | Twin-shaft shredder with independently driven shafts |
| Drive | Separate hydraulic or electric motors |
| Blades | D2 or Hardox, heat-treated and removable |
| Output size | Determined by the blade thickness |
| Operating mode | Low speed, high torque |
| Jam protection | Automatic reversal |
The shredder is used as a first stage in wood recycling lines, biomass production and the treatment of construction waste. The resulting fractions can go to particle board, mulch, biomass or additional milling.
Industrial equipment must comply with the applicable safety requirements. For integration into a complete flow, see the full industry solutions.
| Accepted material | Notes |
|---|---|
| Wood pallets | Including with nails or small straps |
| Furniture scraps | Solid wood, particle board and MDF |
| Construction waste | Beams, boards and joinery |
| Small logs and branches | Volume reduction |
1. The material is fed into the shredder's intake.
2. The counter-rotating shafts actively pull the wood in.
3. The D2 / Hardox blades progressively shred the material.
4. On a jam, the system automatically reverses direction.
5. The shredded fraction is discharged toward the next stage.
What size does it produce?
The size is determined mainly by the thickness of the blades fitted.
What happens if metal enters?
The system reverses automatically on overload; large metal objects must be removed beforehand.
How often are the blades replaced?
It depends on the material and volume; each blade can be replaced individually.
URSTAG is a premium brand of recycling equipment, with over 15 years of experience. You don't just get a machine, you get a solution engineered by specialists, built from top-tier components and backed by a team that supports you from design through commissioning.
• European engineering, every machine and every complete line is designed by our engineering teams in Europe, with a focus on reliability, safety and energy efficiency.
• Premium components, we build on motors and automation from industry leaders: Siemens, Schneider Electric, ABB, WEG, SEW-Eurodrive, NORD Drivesystems and Bonfiglioli.
• Over 15 years of experience, we know how materials and machines behave in real-world operation, and we configure each solution for your flow and volume.
• New equipment, configured for you, we supply new units, made to order for your application, with complete technical documentation.
• Delivery, installation and training included, we handle transport, commissioning and operator training, with support throughout the equipment's life.
As a premium brand, URSTAG relies on European engineering, top-tier components and experience. You choose a partner that supports your production long term, with equipment built to run reliably in demanding industrial environments.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
