Precise stripping for fine wires from electronics, motors and small installations.
| Machine type | Fine-range mechanical cable stripper |
| Cable diameter | 1–38 mm |
| Principle | Precise mechanical incision + stripping |
| Depth adjustment | Fine, quick, without special tools |
| Accepted insulation | PVC, enamel, rubber, PE |
| Products | Intact copper conductor and stripped insulation |
| Operating mode | Continuous or intermittent |
| Components | CE-marked where applicable |
| Capacity | Configured according to project requirements |
| Accepted material | Notes |
| Motor and transformer wire Ø 0.5–5 mm | Enamel or lacquer insulation; fine adjustment |
| Electronics wire Ø 1–10 mm | Thin PVC insulation |
| Signal and data cables Ø 5–38 mm | Thin communications cables |
| Small installation wire Ø 10–38 mm | Small-section residential installations |
This URSTAG copper wire stripping machine handles fine wire and thin cable of 1–38 mm: signal wire, small motor windings and building cable. The cut depth is finely controlled, so the thin copper strand stays whole, and one operator resets it quickly for each diameter, on PVC, enamel, rubber or PE insulation.
• Fine range 1–38 mm, covers fine wires from electronics, motors and office equipment, impossible to strip efficiently by knife.
• Precise incision at small diameters, fine depth adjustment to cut the jacket without breaking or scratching the thin conductor.
• Intact conductor, copper wire stripped without damage achieves maximum price at collectors and refineries.
• Quick adjustment, incision depth adjusts in seconds for each diameter.
• Compact, small footprint, installation in any workshop or collection point.
• Single-operator, simple, safe and no accident risk compared to manual knife stripping.
• Recoverable insulation jacket, stripped PVC or enamel lacquer can be valorized or sent to a granulator.
• Suitable for various volumes, from a few kilograms to hundreds of kilograms of stripped wire per day.
| Parameter | Value |
|---|---|
| Machine type | Fine-range mechanical cable stripper |
| Cable diameter | 1–38 mm |
| Principle | Precise mechanical incision + stripping |
| Depth adjustment | Fine, quick, without special tools |
| Accepted insulation | PVC, enamel, rubber, PE |
| Products | Intact copper conductor and stripped insulation |
| Operating mode | Continuous or intermittent |
| Components | CE-marked where applicable |
| Capacity | Configured according to project requirements |
A 1–38 mm cable stripping machine is used by electronics and repair workshops, WEEE dismantling centers and collectors receiving waste motors, transformers and office equipment. Fine wires from these sources contain high-quality copper, but manual stripping below 10 mm is extremely slow and frequently damages the conductor. A precise mechanical stripper solves exactly this problem.
Equipment used in processing electrical cables must meet the safety requirements of the European Union; a 1–38 mm cable stripping machine delivered in Europe is designed in accordance with the requirements of Directive 2006/42/EC on Machinery. For integration into a complete flow, see also complete industry solutions.
Copper wire from waste electric motors is one of the most valuable dismantling resources: high copper content, clean wire, diameter between 0.5 and 3 mm. A 1–38 mm cable stripping machine efficiently strips this range, quickly turning dismantled motors into clean copper wire, saleable at maximum price compared to mixed or contaminated copper.
Waste transformers, cables from office equipment and wires from small household appliances are other frequent sources of fine copper wire. A 1–38 mm cable stripping machine processes all these types with the same simple adjustment, without special adapters or complicated setup changes, easing the workflow at a dismantling center with mixed sources.
For wires under 5 mm in diameter, the alternative to mechanical stripping is direct granulation, which recovers copper as granules mixed with enamel lacquer or melted PVC. A 1–38 mm cable stripping machine produces instead intact stripped wire, which sells at a higher price than copper granules from a granulator, because it is a purer and more homogeneous product. The choice depends on available wire volume and mix.
Operator safety is more critical with fine wires, where the knife slips easily and accident risk is higher. A 1–38 mm cable stripping machine completely eliminates direct contact with the incision blade, meeting occupational safety requirements and protecting operators working with large volumes of fine wire throughout a full shift.
| Accepted material | Notes |
|---|---|
| Motor and transformer wire Ø 0.5–5 mm | Enamel or lacquer insulation; fine adjustment |
| Electronics wire Ø 1–10 mm | Thin PVC insulation |
| Signal and data cables Ø 5–38 mm | Thin communications cables |
| Small installation wire Ø 10–38 mm | Small-section residential installations |
1. The wire or cable is inserted into the machine's feed guide.
2. The incision depth is finely adjusted according to diameter and insulation thickness.
3. The incision blade cuts the insulation circularly along the set length, without touching the conductor.
4. The stripping mechanism pulls the jacket or insulation off the conductor.
5. The intact copper conductor and insulation are collected separately.
6. Adjustment is made quickly for the next diameter, without special tools.
Precision at small diameters is the defining characteristic: fine depth adjustment allows exact incision even at 1–2 mm wires, where any excess cuts the conductor. Maintenance is limited to periodic blade inspection and guide cleaning.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.