Transforms waste tires into rubber chips, granules and powder, recovered steel and separated fiber.
| Process type | Mechanical recycling at ambient temperature, no chemicals |
| Feedstock | Car, truck, and OTR tires, whole or pre-cut |
| Primary shredding | Twin-shaft shredder, high torque and low speed |
| Intermediate chips | 50–150 mm after primary shredding |
| Metal separation | Magnetic separators (steel wire) |
| Textile separation | Negative-pressure fiber separators |
| Final products | TDF chips 50–100 mm, mulch 20 mm, granules 1–5 mm, rubber powder |
| Components | With CE marking where applicable |
| Capacity | Configurable per project |
| Accepted material | Notes |
| Car tires (passenger vehicles) | The main source, direct processing |
| Truck tires | Pre-cut if they exceed the feeding size |
| OTR / machinery tires | Mandatory pre-cutting for large diameters |
| Industrial rubber | Belts, profiles, and rubber waste |
This URSTAG tire recycling plant takes whole tires through to rubber granules, recovered steel and separated textile fibre, in a mechanical process at ambient temperature with no chemicals. Primary shredding makes 50–150 mm chips, and the following stages, with magnetic separation and fibre separation, go on to mulch, granules and powder.
The URSTAG complete tyre recycling line costs from 180,000 EUR excluding VAT, as a semi-automatic line of 500 kg per hour. The price depends on the hourly capacity and the level of automation. The price includes transport, installation, commissioning and training. Price updated in November 2026, based on UZINEX quotations from the last 18 months.
• Complete, modular flow, a tire recycling system links shredding, rasping, granulation, and separation into a single chain, configured in stages depending on the desired final product.
• Mechanical process, no pollution, everything happens at ambient temperature, with no chemicals and no burning, so no emissions and no wastewater to treat.
• Rubber and steel recovery, the magnetic separators extract the steel wire, and the fiber separators remove the textile, leaving clean rubber and sellable steel.
• Multiple sellable products, TDF chips of 50–100 mm, wire-free mulch of 20 mm, granules of 1–5 mm, and rubber powder, each with its own market.
• Scalable capacity, the system is sized from a starter line up to an industrial installation, adding stages as the volume grows.
• Powerful primary shredding, the primary shredder works with high torque and low speed, breaking down whole tires, including truck and OTR tires.
• Automation and control, conveyor-belt feeding, fraction control through interchangeable screens, and recirculation of oversized material.
• Real payback, from waste that takes up a large volume you obtain feedstock in demand in construction, sports, and industry, shortening the recovery period of the investment.
| Parameter | Value |
|---|---|
| Process type | Mechanical recycling at ambient temperature, no chemicals |
| Feedstock | Car, truck, and OTR tires, whole or pre-cut |
| Primary shredding | Twin-shaft shredder, high torque and low speed |
| Intermediate chips | 50–150 mm after primary shredding |
| Metal separation | Magnetic separators (steel wire) |
| Textile separation | Negative-pressure fiber separators |
| Final products | TDF chips 50–100 mm, mulch 20 mm, granules 1–5 mm, rubber powder |
| Components | With CE marking where applicable |
| Capacity | Configurable per project |
A tire recycling system serves waste-management operators, tire recyclers, and investors who want to enter a market with abundant, cheap feedstock. Each fraction finds its buyer: the chips go as TDF to cement plants, the granules to sports surfaces and elastic paving, and the steel to steelworks. For an operator, this means multiple revenue streams from a single waste.
The management of used tires is strictly regulated in the European Union; landfilling whole or shredded tires is prohibited under Directive 1999/31/EC on the landfill of waste, which turns recycling into a necessity, not an option.
Beyond fuel, rubber recycled from a tire recycling system goes into modified asphalt for more durable and quieter roads, into elastic tiles and pavers, into fitness mats, and into molded products. The fine powder even reaches regenerated rubber. For an investor, the ability to deliver several fractions at once, from coarse mulch to fine powder, opens contracts in different industries and stabilizes demand.
The volume of end-of-life tires in Romania and the region grows year after year, while local processing capacity remains limited. This means abundant feedstock, often at zero acquisition cost or even with a take-back fee collected, and constant demand for the resulting products. A properly sized tire recycling system positions you exactly at the intersection of a pressing environmental problem and a growing sales market.
A tire recycling system processes practically all types of rubber tires, regardless of size. Very large tires, from construction or agricultural machinery, are pre-cut before shredding, and those with a steel bead first go through bead extraction. The better sorted the incoming flow, the cleaner the steel and fiber separation.
| Accepted material | Notes |
|---|---|
| Car tires (passenger vehicles) | The main source, direct processing |
| Truck tires | Pre-cut if they exceed the feeding size |
| OTR / machinery tires | Mandatory pre-cutting for large diameters |
| Industrial rubber | Belts, profiles, and rubber waste |
The flow on a tire recycling system is continuous, automated, and mechanical, from the whole tire to the final fraction:
1. The tires are fed and, if needed, their steel beads are extracted, then the large ones are pre-cut.
2. The twin-shaft primary shredder breaks the tires down into chips of 50–150 mm.
3. A magnetic separator extracts the steel wire released from the chips.
4. The rasper reduces the chips and releases the remaining steel, moving the material toward granules.
5. The granulator reduces the rubber to 1–5 mm, and the fiber separator removes the textile.
6. The fractions are screened, sorted by size, and discharged separately, ready for sale or fine grinding.
Oversized material is recirculated, so the final product stays uniform. A continuously monitored tire recycling system keeps the fractions consistent and quickly brings new operators to stable results, a real advantage in plants with staff turnover.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.