Pre-compresses and shears bulky metal waste for uniform shredder feeding.
| Function | Pre-compression and shearing of bulky metal waste |
| Drive | Hydraulic, high force |
| Feedstock | Sheets, profiles, bulky and irregular metal components |
| Role in the flow | Pre-processing before the shredder |
| Product | Compressed and sheared pieces of controlled size |
| Benefits for the shredder | Uniform feeding, protection, increased throughput |
| Control | PLC, automated cycle |
| Components | CE marked where applicable |
| Capacity | Configurable according to the project |
| Material | Notes |
| Large steel sheets | Sheared into processable pieces |
| Metal profiles and beams | Long lengths reduced through shearing |
| Structural components | Irregular shapes compressed |
| Industrial metal waste | Bulky, from demolition and production |
| Metal casings and containers | Compressed for uniform feeding |
Bulky and irregular metal waste, large sheets, long profiles, components with complex shapes, are hard to feed directly and uniformly into a shredder. A metal waste shearing press solves this problem by pre-compressing and shearing the material into pieces of controlled size and shape, optimizing the feeding of the shredder and protecting it from overloading or from jams caused by bulky irregular parts.
A metal waste shearing press is a valuable pre-processing stage in metal recycling plants, especially for waste with difficult shapes. Compressing and shearing the material before shredding increases throughput, reduces shredder wear, and allows the processing of materials that would otherwise be problematic. See the full range of recycling equipment and the solutions for metal recovery.
• Pre-compression and shearing, compresses and shears bulky material into pieces of controlled size.
• Uniform feeding of the shredder, the uniform pieces allow controlled feeding, without load peaks that overstress the shredder.
• Protection of the shredder, pre-processing protects the shredder from bulky irregular parts that could cause jams or wear.
• Increased throughput, controlled feeding allows the shredder to work at optimal capacity consistently.
• Processing of difficult shapes, large sheets, long profiles, and irregular components become processable after shearing.
• High hydraulic force, the hydraulic system develops the force needed to compress and shear the metals.
• Densification for transport, the compressed material has a higher density, reducing transport cost.
• PLC control, automated compression and shearing cycle.
| Parameter | Value |
|---|---|
| Function | Pre-compression and shearing of bulky metal waste |
| Drive | Hydraulic, high force |
| Feedstock | Sheets, profiles, bulky and irregular metal components |
| Role in the flow | Pre-processing before the shredder |
| Product | Compressed and sheared pieces of controlled size |
| Benefits for the shredder | Uniform feeding, protection, increased throughput |
| Control | PLC, automated cycle |
| Components | CE marked where applicable |
| Capacity | Configurable according to the project |
A metal waste shearing press is used as a pre-processing stage in metal recycling plants that process bulky waste with difficult shapes: large steel sheets, long profiles, structural components, and irregular industrial metal waste. These materials, fed directly into a shredder, would cause load peaks, jams, or accelerated wear; pre-processing turns them into material that is easy to process.
Metal waste management is regulated at the European level; a metal waste shearing press delivered in Europe is designed in line with the requirements of Directive 2006/42/EC on machinery. For integration into a complete metal recycling flow, see also the complete industry solutions.
Protecting the shredder is the main benefit: the shredder is the most expensive piece of equipment in the plant, and feeding it bulky irregular parts accelerates its wear and risks jams. Pre-processing with shearing delivers uniform pieces of controlled size to the shredder, extending the lifespan of the components and reducing unscheduled stops.
Increasing the throughput of the entire plant is a direct effect of uniform feeding: when the shredder receives material of a consistent size and shape, it works at optimal capacity consistently, without load peaks that would slow or stop it. A press as a pre-processing stage allows the shredder to reach its nominal throughput, optimizing the capacity of the entire recycling flow.
High hydraulic force is needed to compress and shear the metals: thick sheets, steel profiles, and structural components offer high resistance. The hydraulic system develops the force needed to compress and shear these materials efficiently, turning them into processable pieces with a single stroke.
Densifying the material through compression has a secondary benefit for transport: bulky metal waste takes up a lot of space, and compressed material has a higher density. This reduces the transport cost per ton, both within the plant and when delivering to other processing facilities or smelters.
| Material | Notes |
|---|---|
| Large steel sheets | Sheared into processable pieces |
| Metal profiles and beams | Long lengths reduced through shearing |
| Structural components | Irregular shapes compressed |
| Industrial metal waste | Bulky, from demolition and production |
| Metal casings and containers | Compressed for uniform feeding |
1. The bulky metal waste is fed into the chamber of the press.
2. The hydraulic system compresses the material, reducing its volume.
3. The shearing mechanism cuts the compressed material into pieces of controlled size.
4. The uniform pieces are discharged onto a conveyor toward the shredder.
5. The shredder receives uniform material, working at optimal capacity consistently.
6. The cycle repeats automatically, coordinated by the PLC system.
The PLC system coordinates the compression and shearing cycle. A correctly integrated metal waste shearing press optimizes the feeding of the shredder, increasing the throughput of the entire plant and protecting the costly equipment from wear and jams.
Why do I need a shearing press before the shredder?
Bulky and irregular metal waste (large sheets, long profiles) fed directly into a shredder causes load peaks, jams, and accelerated wear. A shearing press compresses and shears them into uniform pieces, protecting the shredder and allowing it to work at optimal capacity consistently.
What force does the press develop?
The hydraulic force is sized according to the type and thickness of the materials processed. Thick sheets and steel profiles require a high force for compression and shearing. The exact force is configured according to the specifics of the metal waste processed in your plant.
Does it effectively increase the plant's throughput?
Yes. Through the uniform feeding of the shredder, the press allows the shredder to work at optimal capacity consistently, without load peaks that would slow it down. This increases the effective throughput of the entire recycling flow and optimizes the use of the shredder's capacity.
Can it also be used independently of the shredder?
Yes. A metal waste shearing press can also be used to densify metal waste for transport, independently of the shredder. Compression reduces the volume and the transport cost. However, the main benefit is as a pre-processing stage that optimizes the feeding of the shredder in the recycling flow.
URSTAG is a premium brand of recycling equipment, with over 15 years of experience. You don't just get a machine, you get a solution engineered by specialists, built from top-tier components and backed by a team that supports you from design through commissioning.
• European engineering, every machine and every complete line is designed by our engineering teams in Europe, with a focus on reliability, safety and energy efficiency.
• Premium components, we build on motors and automation from industry leaders: Siemens, Schneider Electric, ABB, WEG, SEW-Eurodrive, NORD Drivesystems and Bonfiglioli.
• Over 15 years of experience, we know how materials and machines behave in real-world operation, and we configure each solution for your flow and volume.
• New equipment, configured for you, we supply new units, made to order for your application, with complete technical documentation.
• Delivery, installation and training included, we handle transport, commissioning and operator training, with support throughout the equipment's life.
As a premium brand, URSTAG relies on European engineering, top-tier components and experience. You choose a partner that supports your production long term, with equipment built to run reliably in demanding industrial environments.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
