The first link in any sorting plant: it takes waste from the reception hopper and delivers it to the line in a steady flow, with no surges and no blockages.
| Slat width (mm) | 1000 |
| Indicative throughput (t/h) | 10–20 |
| Installed power (kW) | 5.5–11 |
| Slat thickness (mm) | 6 |
| Drive | Sleeve roller chain |
| Feed rate control | Variable frequency drive |
This URSTAG waste apron feeder takes mixed household waste from the reception bunker and feeds the line at a steady rate, so downstream machines never get surges of material. It comes in 1, 2 and 3 m widths for 10–60 t/h, with 6–8 mm plates and a roller-and-bush chain.
• Steady flow, not surges, a properly set apron feeder keeps the line load uniform, so the trommel screen and the separators run at stable efficiency instead of choking and then running empty.
• Impact resistance, overlapping steel slats take direct tipping from a front loader or grab, including large heavy objects that would tear a rubber belt.
• Tolerant of real waste, it runs on wet, dirty, abrasive and mixed material, which is exactly what arrives at a municipal plant, as well as on clean pre-sorted flow.
• Feed rate adjustable from the drive, the speed is set electronically, so you can change the line load while running, with no stops and no mechanical work.
• Low maintenance, the simple chain and sprocket construction has few wear points, and slats can be replaced individually.
• Good flow containment, the slat overlap limits fine material spilling underneath the conveyor, so there is less cleaning to do below the line.
| Parameter | 1 m width | 2 m width | 3 m width |
|---|---|---|---|
| Slat width (mm) | 1000 | 2000 | 3000 |
| Indicative throughput (t/h) | 10–20 | 20–40 | 40–60 |
| Installed power (kW) | 5.5–11 | 7.5–15 | 15–18 |
| Slat thickness (mm) | 6 | 8 | 8 |
| Drive | Sleeve roller chain | Sleeve roller chain | Sleeve roller chain |
| Feed rate control | Variable frequency drive | Variable frequency drive | Variable frequency drive |
These figures are indicative and cover the usual configurations. Length, incline angle, discharge height and final power are set to suit your site and the throughput the rest of the line requires.
• Municipal waste sorting plants, feeding the line from the reception hopper, the first stage ahead of the bag opener.
• Shredding installations, uniform feeding of primary shredders, where an uneven rate causes overload and stoppages.
• Landfills and transfer stations, handling old, heavy and wet waste that destroys ordinary belts.
• Construction waste lines, conveying rubble, brick and broken concrete, all highly abrasive materials.
• Bulky waste, feeding lines that process furniture, mattresses and large objects, where the slats carry concentrated loads.
A sleeve roller chain drives sprockets, and the chain's cyclic motion pulls the steel slats that form the conveying surface. The material rests directly on the slats, not on a tensioned belt, so weight and shock transfer into the chain and the structure rather than into an elastic element. Because the slats overlap, fine material does not fall between them. Speed is controlled from a variable frequency drive, which turns the conveyor into a feed rate control instrument for the whole line.
Width is chosen from the throughput the rest of the line requires and from the maximum object size in the flow. For a municipal plant up to roughly 100 tonnes per day, a 1 metre feeder usually covers the need. Between 100 and 300 tonnes per day the 2 metre version is used. Above that, or when bulky waste appears in the flow, the 3 metre width becomes necessary, both for throughput and to avoid blockages at the inlet. One detail that is often overlooked: the feeder should be sized with throughput headroom above what the line asks for, otherwise it becomes the bottleneck of the installation itself.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.