This type of excavator bucket is designed for cleaning, grading and handling loose materials.
| Bucket width | 1.000 mm |
| Excavator compatibility | Rippa R10, R13, R15 |
| Excavator operating weight | 1,0 – 1,8 tonnes |
| Bucket type | Cleaning / grading, toothless |
| Design | High volume, straight edge |
| Material | High-strength steel |
| Surface treatment | Industrial anti-corrosion paint |
| Coupling system | Standard Rippa quick coupler |
| Product code | LP0104010811 |
The 1000mm excavator bucket for the Rippa R10, R13 and R15 mini excavators is the grading and cleaning attachment designed specifically for the 1,0–1,8 tonne class: the 1.000 mm width provides an optimal working surface for operations in which finishing precision and the volume of material moved per cycle matter more than penetration force. Made of high-strength steel with an industrial anti-corrosion treatment, the 1000mm Rippa excavator bucket is built for durability in intensive use on construction sites, water-management works and land-shaping projects.
The toothless design of the 1000mm excavator bucket is the right choice when the material does not need to be penetrated but collected, moved or graded with precision: loose soil, mud, sand, fine gravel, plant debris. The smooth interior surface and the optimised profile of the bucket allow complete discharge of material at every dumping cycle, with no residue that would reduce hourly productivity on ditch-cleaning works, platform grading and watercourse regularisation. Key advantages of the 1000mm Rippa excavator bucket
• Verified compatibility with Rippa R10, R13 and R15: the 1000mm excavator bucket is designed and tested specifically for the three Rippa models in the 1,0–1,8 tonne class. The quick-coupler system matches the standard couplings of these excavators without intermediate adapters, without modifications and without play in the joints, a rigid connection that maintains positioning precision throughout the entire working period.
• Width 1000mm: the optimal working surface for 1–1,8t mini excavators. The 1.000 mm width of the 1000mm excavator bucket efficiently covers the width of a stormwater ditch or an irrigation channel in a single pass, eliminating the additional passes needed with a narrower bucket. On platform-grading works, the large width reduces the number of passes needed to cover the total surface.
• Toothless design for precise grading and cleaning: the absence of teeth on the cutting edge of the 1000mm excavator bucket allows fine grading of surfaces without leaving marks or irregularities. The straight edge cuts uniformly into loose materials and allows the complete pick-up of mud and sediment from the bottom of ditches and channels without disturbing the substrate structure.
“the absence of teeth on the cutting edge of the 1000 mm excavator bucket allows fine levelling of surfaces without leaving marks or irregularities.”
• High working volume per cycle: the generous-volume profile of the 1000mm excavator bucket maximises the amount of material collected at each digging and dumping cycle. On drainage-channel cleaning works or loose-soil excavation, the high volume translates directly into high hourly productivity and lower fuel consumption per cubic metre excavated.
• High-strength steel with welds made using advanced technology: the structure of the 1000mm Rippa excavator bucket is made of high-strength steel with welds executed using advanced welding equipment, with full penetration at the critical joints. The structural resistance to repeated impact loads and to torsion guarantees the integrity of the bucket throughout its entire service life, including under intensive use.
• Industrial anti-corrosion paint: the industrial anti-corrosion paint finish protects the 1000mm excavator bucket against the accelerated degradation caused by permanent contact with wet soil, mud, saline water and other corrosive environments specific to drainage, sewerage and watercourse-regularisation works.
• Fast mounting and dismounting via the standard coupler: the quick-coupler system of the 1000mm Rippa excavator bucket allows changing the attachment in a few minutes on site, without special tools. On works with mixed requirements (alternating between the cleaning bucket and the toothed bucket or breaker), the downtime for changing the attachment is reduced to a minimum.
• 60-month UZINEX warranty: extended coverage for the 1000mm Rippa excavator bucket, with spare parts available and national technical support.
Technical specifications: 1000mm excavator bucket Rippa R10/R13/R15
| Parameter | Value |
|---|---|
| Bucket width | 1.000 mm |
| Excavator compatibility | Rippa R10, R13, R15 |
| Excavator operating weight | 1,0 – 1,8 tonnes |
| Bucket type | Cleaning / grading, toothless |
| Design | High volume, straight edge |
| Material | High-strength steel |
| Surface treatment | Industrial anti-corrosion paint |
| Coupling system | Standard Rippa quick coupler |
| Product code | LP0104010811 |
Applications for the toothless 1000mm excavator bucket
The Rippa 1000 mm excavator bucket is the reference attachment for all works where the excavated material is loose.
General construction works: digging trenches for continuous foundations.
Application dedicated to flows with constant quality requirements.
The 1000mm Rippa excavator bucket is the reference attachment for all works in which the excavated material is loose or cohesive and the finish of the resulting surface matters: applications in which a toothed bucket would damage the ditch bottom or leave an irregular surface requiring manual reworking.
Cleaning and maintaining drainage ditches and irrigation channels is the most frequent application for the 1000mm excavator bucket. The sediment accumulated at the bottom of ditches (mud, gravel, plant debris) is removed efficiently with the straight edge of the bucket, which scrapes the channel bottom without damaging the slopes or existing waterproofing membranes. The 1.000 mm width covers a standard drainage ditch in a single pass.
Land grading for foundations, platforms and landscaping is another main application of the 1000mm excavator bucket. Finishing the blinding-concrete level, preparing the surface for paving slabs or grading the topsoil layer before seeding are operations in which the precision of the toothless bucket's straight edge makes the difference compared to a standard digging bucket.
Light dredging of basins, ponds and small watercourses is carried out efficiently with the 1000mm Rippa excavator bucket mounted on the R10, R13 or R15 mini excavators, small-footprint machines that can access narrow riverside areas or banks with difficult access for larger-class excavators. The reduced weight of Rippa mini excavators minimises riverside soil compaction during dredging works.
General construction works (excavating trenches for strip foundations, digging gutters for electrical cables and pipes, preparing surfaces for concreting) benefit from the standardised 1.000 mm width of the bucket, which corresponds to the usual widths of strip foundations and utility trenches in civil construction. Rippa R10, R13 and R15: verified compatibility
The 1000mm excavator bucket is approved by the manufacturer for mounting on the three Rippa models: R10 (1,0 tonnes), R13 (1,3 tonnes) and R15 (1,5 tonnes). The differences in operating weight between the three models do not affect compatibility with the 1000mm excavator bucket: the quick-coupler system is identical across the whole series, and the hydraulic force available on all three models is sufficient for efficient use of the bucket at the 1.000 mm width.
If you have several Rippa mini excavators from the R10/R13/R15 series in your fleet, the 1000mm excavator bucket can be transferred quickly between machines via the standard quick-coupler system, maximising the use of the attachment and minimising investment in duplicate attachments for machines of the same type.
UZINEX also supplies other attachments for the Rippa series. Consult the complete catalogue of construction-machinery attachments or contact UZINEX engineers to configure the complete attachment set for your Rippa mini excavator. Frequently asked questions about the 1000mm Rippa excavator bucket
Does the 1000mm excavator bucket fit mini excavators other than the Rippa R10/R13/R15?
The 1000mm Rippa excavator bucket is designed with the quick-coupler system specific to the Rippa R10/R13/R15 series. Mounting on other brands or models of mini excavators requires verifying coupling-system compatibility: the pin geometry and the dimensions of the mounting ears may differ. UZINEX engineers verify compatibility with your specific mini excavator on request. What is the difference between the toothless 1000mm excavator bucket and the toothed bucket for the Rippa?
The toothless 1000mm excavator bucket is optimised for loose materials (soil, mud, sand, fine gravel) and for works that require a precise surface finish: grading, ditch cleaning, dredging. The toothed bucket is suitable for compact materials or coarse gravel, where penetration requires localised cutting force. The correct choice depends on the predominant material type and the finishing requirements of the work. Is the 1000mm excavator bucket also available in other widths for the Rippa?
UZINEX supplies Rippa attachments in several widths, depending on the application. If you need a narrower bucket (for utility trenches) or a wider one (for grading works over large surfaces), contact UZINEX engineers to identify the available variant compatible with your Rippa model. What is the weight of the 1000mm Rippa excavator bucket?
The exact weight of the 1000mm Rippa excavator bucket is provided by UZINEX engineers on request, together with the calculation of the total load on the excavator arm (bucket weight + material) to verify that you do not exceed the lifting capacity of your Rippa R10, R13 or R15 model. Is the 1000mm Rippa excavator bucket available from stock or to order?
UZINEX maintains a stock of Rippa attachments for immediate delivery. The exact availability of the 1000mm excavator bucket is confirmed by the UZINEX team at the order; consultancy and stock check available free of charge. Free delivery throughout Romania. Why UZINEX for the 1000mm Rippa excavator bucket
The 1000mm excavator bucket for the Rippa R10/R13/R15 is a frequently used attachment whose performance over time depends on the quality of manufacture and the availability of spare parts. UZINEX provides complete support for the Rippa series.
• 60-month warranty: extended coverage compared to the standard warranty for the 1000mm Rippa excavator bucket purchased through UZINEX.
• Verified compatibility: UZINEX confirms mountability on your specific Rippa model before delivery, eliminating the risk of purchasing an incompatible attachment.
• Transport included: free delivery to your premises or site throughout Romania.
• Spare parts in stock: wear components for the Rippa series available immediately in Iași, without orders with long delivery times.
• Complete Rippa attachment catalogue: buckets of different widths, toothed buckets, hydraulic breaker and other attachments available through UZINEX for the entire Rippa R10/R13/R15 series.
• Eligible for public procurement SEAP/SICAP: complete technical documentation provided on request, as a member of the Enterprise Europe Network.
The 1000mm Rippa excavator bucket available through UZINEX is the standard attachment for grading, ditch cleaning and light dredging works with the Rippa R10, R13 and R15 mini excavators, with verified compatibility, high-strength steel, anti-corrosion paint and a 60-month warranty.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
