The RIPPA R10 ECO mini excavator is a one-tonne model, compact and efficient, ideal for narrow spaces such as renov…
| Type | Compact tracked mini excavator |
| Operating weight | 1.000 kg / 2.205 lb |
| Engine | Kubota Z482 |
| Maximum power | 8,2 kW / 11 CP |
| Number of cylinders | 2 |
| Emissions standard | Euro V |
| Control type | Direct mechanical |
| Bucket capacity | 0,014 m³ / 0,49 ft³ |
| Maximum digging radius | 3.233 mm / 127,3 in |
| Maximum digging depth | 1.833 mm / 72,2 in |
| Maximum digging height | 3.024 mm / 118,9 in |
| Maximum dumping height | 2.247 mm / 88,5 in |
| Maximum boom swing angle | 121° |
| Track width range | 912–1.212 mm / 35,9–47,7 in |
| Transport dimensions (L × W × H) | 2.430 × 912 × 2.261 mm |
| Side tilt | Yes, including telescopic |
1-tonne mini excavator Rippa R10 ECO: the machine chosen when the width, weight or slew radius of large machines become real obstacles. Compact, easy to transport and equipped with a Euro V compliant Kubota Z482 engine, this 1-tonne mini excavator goes where others cannot: interior yards, narrow alleys, urban trenches and residential gardens.
With a weight of 1.000 kg and a transport width of 912 mm, the 1-tonne mini excavator R10 ECO accesses spaces where no other construction machine can enter. The telescopic side tilt extends the working radius without moving the machine, a direct advantage in narrow trenches or areas with fixed obstacles on the sides. Key advantages of the 1-tonne mini excavator Rippa R10 ECO
• Weight 1.000 kg: maximum access, the lightest model in the Rippa range. It loads onto any standard 1,5 tonne trailer, requires no special transport and does not damage access surfaces in yards or gardens.
• Telescopic side tilt: the arm can tilt to the side and extend telescopically, allowing digging at variable angles without repositioning the machine. Essential for trenches parallel to walls or work in spaces with strictly limited width.
• Kubota Z482 engine, Euro V: a 2-cylinder diesel engine, 8,2 kW / 11 CP. Low consumption, minimal emissions, accepted on urban sites with pollution restrictions.
• Direct mechanical control: without the electrohydraulic complexity of pilot controls. Reduced maintenance costs, simple diagnosis, repair possible in any mechanical workshop experienced with machinery.
• Boom swing angle 121°: one of the largest in its class, allowing excavation near foundations and walls without moving the machine sideways.
• Adjustable track width 912–1.212 mm: the tracks extend for stability on open ground and retract to 912 mm for access through doors and narrow passages.
• Digging depth 1.833 mm: sufficient for light foundations, sewer trenches, irrigation installations and utility networks at standard residential depths.
• 60-month warranty: extended coverage compared to the market standard for a 1-tonne mini excavator with a Kubota engine and spare parts in stock at UZINEX.
“Most models in its class offer only a simple arm offset relative to the machine axis.”
Technical specifications: 1-tonne mini excavator Rippa R10 ECO
| Parameter | Value |
|---|---|
| Model | Rippa R10 ECO |
| Type | Compact tracked mini excavator |
| Operating weight | 1.000 kg / 2.205 lb |
| Engine | Kubota Z482 |
| Maximum power | 8,2 kW / 11 CP |
| Number of cylinders | 2 |
| Emissions standard | Euro V |
| Control type | Direct mechanical |
| Bucket capacity | 0,014 m³ / 0,49 ft³ |
| Maximum digging radius | 3.233 mm / 127,3 in |
| Maximum digging depth | 1.833 mm / 72,2 in |
| Maximum digging height | 3.024 mm / 118,9 in |
| Maximum dumping height | 2.247 mm / 88,5 in |
| Maximum boom swing angle | 121° |
| Track width range | 912–1.212 mm / 35,9–47,7 in |
| Transport dimensions (L × W × H) | 2.430 × 912 × 2.261 mm |
| Side tilt | Yes, including telescopic |
Telescopic side tilt: why it matters on site
Most models in its class offer only simple boom swing relative to the machine axis. This 1-tonne mini excavator adds telescopic side tilt: the arm can tilt to the side and extend telescopically to reach lateral areas without repositioning.
When you dig a trench along a fence or wall, you can keep the machine on the central axis and tilt the arm to the side to work precisely at the edge. Without this function, the operator repeatedly repositions the machine, losing time and risking damage to adjacent surfaces.
For landscapers and installation firms with frequent geometric constraints, the telescopic side tilt of this 1-tonne mini excavator is a daily operational advantage, not a niche function. Kubota Z482 Euro V engine: reliability and compliance
The Kubota Z482 is a 2-cylinder liquid-cooled diesel engine with a proven track record in compact machinery. Its choice on this 1-tonne mini excavator answers two current requirements of the Romanian market.
• Euro V compliance: reduced emissions allow use on urban sites with pollution restrictions, in parks and densely populated residential areas.
• Proven reliability: spare parts available in Romania through the Kubota distributor network, without import waiting times.
The 1-tonne class is the most versatile in the mini excavator category.
Installers and utility companies use it for water and gas trenches.
Builders of individual houses use this 1-tonne mini excavator for light foundations.
• Low consumption: lower operating costs per hour compared to equivalent engines. Relevant for firms that run the machine daily across multiple sites.
Suitable applications for the 1-tonne mini excavator R10 ECO
The 1-tonne class is the most versatile in the mini excavator category: powerful enough for everyday work, compact enough for access into any space. The Rippa R10 ECO, as a 1-tonne mini excavator, covers frequent applications in Romania.
Plumbers and utility firms use it for water, gas, sewer and electrical cable trenches in residential areas where access with 2–3 tonne machines is impossible. The 1.833 mm depth covers the vast majority of standard trenches in individual construction.
Individual-house builders use this 1-tonne mini excavator for light foundations, perimeter drainage and earth relocation in landscaped yards. The reduced weight allows access through a standard yard gate without modifications.
Landscapers choose the 1-tonne mini excavator R10 ECO for planting large trees, installing irrigation systems and shaping terrain in private gardens and public spaces. Frequently asked questions about the 1-tonne mini excavator Rippa R10 ECO
What distinguishes the R10 ECO from the R13 Professional in the same family?
The 1-tonne mini excavator R10 ECO prioritises minimal weight (1.000 kg versus 1.300 kg), reduced cost through mechanical control and Euro V compliance. The R13 Professional adds hydraulic pilot controls, higher hydraulic pressure (20 MPa), a hydraulic thumb and a quick coupler, for intensive daily professional use. Is mechanical control a disadvantage compared to pilot controls?
Not necessarily. The mechanical control of this 1-tonne mini excavator brings lower maintenance costs, repair possible in any workshop and a shorter learning curve. The drawback is a slightly higher physical effort during repetitive manoeuvres over long shifts, negligible for use of 2–4 hours per day. How is the R10 ECO transported between sites?
With dimensions of 2.430 × 912 × 2.261 mm and 1.000 kg, this 1-tonne mini excavator loads onto a standard tipping trailer. It requires no special permits or truck; it can be transported by a passenger car with a tow hitch and a suitable trailer. What is the maintenance interval?
The Kubota Z482 follows standard intervals: engine oil at 250 hours, fuel and hydraulic filters at 500 hours. All operations can be carried out in any mechanical workshop. UZINEX keeps the specific parts in stock: details on the technical support page. Is the R10 ECO suitable for an inexperienced operator?
Yes. The mechanical control of this 1-tonne mini excavator is more intuitive than pilot systems for beginning operators. UZINEX includes basic training free of charge at commissioning, carried out by its own technicians at the client's premises. Can it be financed through EU programmes or leasing?
Yes. UZINEX is a member of the Enterprise Europe Network and supplies equipment for PNRR and structural-fund projects. Leasing options are available on the loans and leasing page. Why UZINEX for a 1-tonne mini excavator
Purchasing a 1-tonne mini excavator is a 5–10 year decision. The partner you buy it from determines whether that investment works or generates unforeseen costs. UZINEX fully covers the after-sales equation.
• 60-month warranty: triple the minimum legal standard for a 1-tonne mini excavator in daily work.
• Transport and commissioning included: delivery anywhere in Romania, installation, testing and operator training at no additional cost.
• Spare parts in stock: components available immediately, without weeks of waiting for import.
• National technical support 24–48 hours: a network of technicians with a guaranteed response time, anywhere in Romania.
• AI-powered manuals: interactive documentation for fast diagnosis, accessible from your phone directly on site.
• Eligible for EU funds: member of the Chamber of Commerce and Industry and the Enterprise Europe Network.
The Rippa R10 ECO is the 1-tonne mini excavator chosen by contractors and small firms that need real digging capacity in spaces where nothing else fits, backed by a partner that remains available even after delivery.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
