The 1000mm excavator bucket for the Rippa R10, R13 and R15 mini excavators is the grading and cleaning attachment designed specifically for the 1,0–1,8 tonne class — the 1.000 mm width provides an optimal working surface for operations in which finishing precision and the volume of material moved per cycle matter more than penetration force. Made of high-strength steel with an industrial anti-corrosion treatment, the 1000mm Rippa excavator bucket is built for durability in intensive use on construction sites, water-management works and land-shaping projects.
The toothless design of the 1000mm excavator bucket is the right choice when the material does not need to be penetrated but collected, moved or graded with precision: loose soil, mud, sand, fine gravel, plant debris. The smooth interior surface and the optimised profile of the bucket allow complete discharge of material at every dumping cycle, with no residue that would reduce hourly productivity on ditch-cleaning works, platform grading and watercourse regularisation. Key advantages of the 1000mm Rippa excavator bucket
• Verified compatibility with Rippa R10, R13 and R15 — the 1000mm excavator bucket is designed and tested specifically for the three Rippa models in the 1,0–1,8 tonne class. The quick-coupler system matches the standard couplings of these excavators without intermediate adapters, without modifications and without play in the joints — a rigid connection that maintains positioning precision throughout the entire working period.
• Width 1000mm — the optimal working surface for 1–1,8t mini excavators — the 1.000 mm width of the 1000mm excavator bucket efficiently covers the width of a stormwater ditch or an irrigation channel in a single pass, eliminating the additional passes needed with a narrower bucket. On platform-grading works, the large width reduces the number of passes needed to cover the total surface.
• Toothless design for precise grading and cleaning — the absence of teeth on the cutting edge of the 1000mm excavator bucket allows fine grading of surfaces without leaving marks or irregularities. The straight edge cuts uniformly into loose materials and allows the complete pick-up of mud and sediment from the bottom of ditches and channels without disturbing the substrate structure.
• High working volume per cycle — the generous-volume profile of the 1000mm excavator bucket maximises the amount of material collected at each digging and dumping cycle. On drainage-channel cleaning works or loose-soil excavation, the high volume translates directly into high hourly productivity and lower fuel consumption per cubic metre excavated.
• High-strength steel with welds made using advanced technology — the structure of the 1000mm Rippa excavator bucket is made of high-strength steel with welds executed using advanced welding equipment, with full penetration at the critical joints. The structural resistance to repeated impact loads and to torsion guarantees the integrity of the bucket throughout its entire service life, including under intensive use.
• Industrial anti-corrosion paint — the industrial anti-corrosion paint finish protects the 1000mm excavator bucket against the accelerated degradation caused by permanent contact with wet soil, mud, saline water and other corrosive environments specific to drainage, sewerage and watercourse-regularisation works.
• Fast mounting and dismounting via the standard coupler — the quick-coupler system of the 1000mm Rippa excavator bucket allows changing the attachment in a few minutes on site, without special tools. On works with mixed requirements (alternating between the cleaning bucket and the toothed bucket or breaker), the downtime for changing the attachment is reduced to a minimum.
• 60-month UZINEX warranty — extended coverage for the 1000mm Rippa excavator bucket, with spare parts available and national technical support.
Technical specifications — 1000mm excavator bucket Rippa R10/R13/R15
| Parameter | Value |
|---|---|
| Bucket width | 1.000 mm |
| Excavator compatibility | Rippa R10, R13, R15 |
| Excavator operating weight | 1,0 – 1,8 tonnes |
| Bucket type | Cleaning / grading — toothless |
| Design | High volume, straight edge |
| Material | High-strength steel |
| Surface treatment | Industrial anti-corrosion paint |
| Coupling system | Standard Rippa quick coupler |
| Product code | LP0104010811 |
Applications for the toothless 1000mm excavator bucket
The 1000mm Rippa excavator bucket is the reference attachment for all works in which the excavated material is loose or cohesive and the finish of the resulting surface matters — applications in which a toothed bucket would damage the ditch bottom or leave an irregular surface requiring manual reworking.
Cleaning and maintaining drainage ditches and irrigation channels is the most frequent application for the 1000mm excavator bucket. The sediment accumulated at the bottom of ditches — mud, gravel, plant debris — is removed efficiently with the straight edge of the bucket, which scrapes the channel bottom without damaging the slopes or existing waterproofing membranes. The 1.000 mm width covers a standard drainage ditch in a single pass.
Land grading for foundations, platforms and landscaping is another main application of the 1000mm excavator bucket. Finishing the blinding-concrete level, preparing the surface for paving slabs or grading the topsoil layer before seeding are operations in which the precision of the toothless bucket's straight edge makes the difference compared to a standard digging bucket.
Light dredging of basins, ponds and small watercourses is carried out efficiently with the 1000mm Rippa excavator bucket mounted on the R10, R13 or R15 mini excavators — small-footprint machines that can access narrow riverside areas or banks with difficult access for larger-class excavators. The reduced weight of Rippa mini excavators minimises riverside soil compaction during dredging works.
General construction works — excavating trenches for strip foundations, digging gutters for electrical cables and pipes, preparing surfaces for concreting — benefit from the standardised 1.000 mm width of the bucket, which corresponds to the usual widths of strip foundations and utility trenches in civil construction. Rippa R10, R13 and R15 — verified compatibility
The 1000mm excavator bucket is approved by the manufacturer for mounting on the three Rippa models: R10 (1,0 tonnes), R13 (1,3 tonnes) and R15 (1,5 tonnes). The differences in operating weight between the three models do not affect compatibility with the 1000mm excavator bucket — the quick-coupler system is identical across the whole series, and the hydraulic force available on all three models is sufficient for efficient use of the bucket at the 1.000 mm width.
If you have several Rippa mini excavators from the R10/R13/R15 series in your fleet, the 1000mm excavator bucket can be transferred quickly between machines via the standard quick-coupler system, maximising the use of the attachment and minimising investment in duplicate attachments for machines of the same type.
UZINEX also supplies other attachments for the Rippa series — consult the complete catalogue of construction-machinery attachments or contact UZINEX engineers to configure the complete attachment set for your Rippa mini excavator. Frequently asked questions about the 1000mm Rippa excavator bucket
Does the 1000mm excavator bucket fit mini excavators other than the Rippa R10/R13/R15?
The 1000mm Rippa excavator bucket is designed with the quick-coupler system specific to the Rippa R10/R13/R15 series. Mounting on other brands or models of mini excavators requires verifying coupling-system compatibility — the pin geometry and the dimensions of the mounting ears may differ. UZINEX engineers verify compatibility with your specific mini excavator on request. What is the difference between the toothless 1000mm excavator bucket and the toothed bucket for the Rippa?
The toothless 1000mm excavator bucket is optimised for loose materials (soil, mud, sand, fine gravel) and for works that require a precise surface finish — grading, ditch cleaning, dredging. The toothed bucket is suitable for compact materials or coarse gravel, where penetration requires localised cutting force. The correct choice depends on the predominant material type and the finishing requirements of the work. Is the 1000mm excavator bucket also available in other widths for the Rippa?
UZINEX supplies Rippa attachments in several widths, depending on the application. If you need a narrower bucket (for utility trenches) or a wider one (for grading works over large surfaces), contact UZINEX engineers to identify the available variant compatible with your Rippa model. What is the weight of the 1000mm Rippa excavator bucket?
The exact weight of the 1000mm Rippa excavator bucket is provided by UZINEX engineers on request, together with the calculation of the total load on the excavator arm (bucket weight + material) to verify that you do not exceed the lifting capacity of your Rippa R10, R13 or R15 model. Is the 1000mm Rippa excavator bucket available from stock or to order?
UZINEX maintains a stock of Rippa attachments for immediate delivery. The exact availability of the 1000mm excavator bucket is confirmed by the UZINEX team at the order — consultancy and stock check available free of charge. Free delivery throughout Romania. Why UZINEX for the 1000mm Rippa excavator bucket
The 1000mm excavator bucket for the Rippa R10/R13/R15 is a frequently used attachment whose performance over time depends on the quality of manufacture and the availability of spare parts. UZINEX provides complete support for the Rippa series.
• 60-month warranty — extended coverage compared to the standard warranty for the 1000mm Rippa excavator bucket purchased through UZINEX.
• Verified compatibility — UZINEX confirms mountability on your specific Rippa model before delivery, eliminating the risk of purchasing an incompatible attachment.
• Transport included — free delivery to your premises or site throughout Romania.
• Spare parts in stock — wear components for the Rippa series available immediately in Iași, without orders with long delivery times.
• Complete Rippa attachment catalogue — buckets of different widths, toothed buckets, hydraulic breaker and other attachments available through UZINEX for the entire Rippa R10/R13/R15 series.
• Eligible for public procurement SEAP/SICAP — complete technical documentation provided on request, as a member of the Enterprise Europe Network.
The 1000mm Rippa excavator bucket available through UZINEX is the standard attachment for grading, ditch cleaning and light dredging works with the Rippa R10, R13 and R15 mini excavators — with verified compatibility, high-strength steel, anti-corrosion paint and a 60-month warranty.