The continuous portable laser cleaning machine LAZIRON permanently eliminates the classic operations of sand blasting, chemical acid stripping and abrasive milling of metal surfaces. The continuous laser beam vaporizes contaminants (rust, paint, oil, deposits) without touching the base surface of the metal.
With power between 1000 and 3000 W and a cleaning speed of 5-25 m²/hour depending on the type of contaminant, every continuous portable laser cleaning machine LAZIRON C turns the dirty, slow and costly operations of metal pre-treatment into a clean, fast process that complies with all European environmental standards, an investment that pays for itself through the consumables it eliminates.
What makes LAZIRON C a continuous portable laser cleaning machine built for real production
The continuous portable laser cleaning machine LAZIRON C concentrates into a single system the advantages that matter on the production line: repeatable precision, parameter automation, predictable operating costs and a long service life for critical components.
• 100% elimination of abrasive consumables, no blasting sand, no stripping acids, no chemical solvents, no wire brushes, the only 100% green cleaning machine.
• Continuous fiber power 1000-3000 W, configurable for applications ranging from fine cleaning (pre-painting surfaces) to heavy stripping (thick post-welding oxides).
• Cleaning speed 5-25 m²/hour, depends on the contaminant being removed: 25 m²/h for oil and dust, 10-15 m²/h for light rust, 5-8 m²/h for thick paint and oxides.
• Ergonomic portable head 1.5-2.5 kg, the operator holds the head with one hand and covers large areas without fatigue, compared with the classic 5-8 kg blasting gun.
• The beam does not damage the base metal, unlike blasting which erodes the surface, the laser vaporizes only the contaminants, a perfect finish for subsequent welding or painting.
• Delivery cable 5-15 meters, lets the operator move freely around the workpiece or on the job site without moving the base machine.
• Air + water cooling for extended duration, allows continuous operation 8+ hours/day without overheating, essential for workshops with constant production.
Technical specifications, continuous portable laser cleaning machine LAZIRON C
This continuous portable laser cleaning machine LAZIRON is available in standardized configurations, the choice being made according to the application mix and the monthly production volume of the workshop.
| Parameter | Value |
|---|---|
| Fiber laser source power | 1000 / 1500 / 2000 / 3000 W (optional) |
| Emission type | Continuous (CW) |
| Wavelength | 1064 nm |
| Cleaning speed (depends on contaminant) | 5-25 m²/hour |
| Adjustable spot diameter | 1-6 mm (with optical zoom) |
| Delivery cable length | 5 m standard (optional 10-15 m) |
| Cleaning head weight | 1.5-2.5 kg |
| Cooling system | Air + water (S&A chiller) |
| Fiber source service life | Over 100,000 hours stated |
| Energy consumption | 3-7 kW (depending on power) |
| Supply voltage | 220 V single-phase (1-2 kW) or 380 V three-phase (3 kW) |
| Certification | CE |
Industries that use a continuous portable laser cleaning machine LAZIRON
A continuous portable laser cleaning machine LAZIRON is the choice for workshops that want to eliminate recurring consumable costs (sand, acids, solvents, brushes) and comply with environmental standards without investing in separate waste filtration installations.
Auto restoration workshops use a single continuous portable laser cleaning machine LAZIRON C to remove old paint, rust and deposits from classic car bodies without touching the base metal, perfect preparation for subsequent painting with a concours-quality finish. Auto body repair shops and trailer factories process 20-50 parts/day with results far superior to shot blasting with metal pellets.
The mold and tooling production industry (cleaning mold faces between cycles, removing storage protection oils), food and pharmaceutical equipment factories (cleaning stainless steel to reset sanitary compliance) and industrial maintenance services (cleaning welded components for NDT inspection) recover the investment in the continuous portable laser cleaning machine in 18-30 months at typical daily use.
Materials compatible with a continuous portable laser cleaning machine LAZIRON
With power between 1000 and 3000 W, every continuous portable laser cleaning machine LAZIRON LAZIRON C successfully processes all metallic materials and most common organic and inorganic contaminants.
The optical zoom system adjusts the spot diameter between 1 and 6 mm, allowing both fine cleaning on small areas and rapid coverage on large surfaces in the same session without changing equipment.
Typical performance per material
• Rust on carbon steel: 1-15 m²/hour
• Old paint (1-2 coats): 5-12 m²/hour
• Oils and greasy deposits: 15-25 m²/hour
• Weld oxides on stainless steel: 8-15 m²/hour
How the LAZIRON C model operates
The workflow of a continuous portable laser cleaning machine LAZIRON LAZIRON C is built for direct use, without complex preparation of the workpiece or the operator.
1. The operator turns on the machine and waits 30-60 seconds for the laser source to stabilize.
2. Selects the parameters from the panel: power, scan frequency, travel speed.
3. Directs the portable head toward the surface to be cleaned, at a distance of 50-150 mm.
4. Pulls the trigger and moves the head with a uniform motion over the contaminated area.
5. The laser beam vaporizes the contaminants instantly, with no solid residue on the surface.
6. At the end, turns off the machine and inspects the result, the surface is ready for welding, painting or a subsequent operation.
For integration with other equipment in your workshop, the machine connects natively to the other LAZIRON equipment through a shared MES.
Frequently asked questions about the continuous portable laser cleaning machine
How much do I save with a continuous portable laser cleaning machine LAZIRON C compared with sand blasting?
Classic blasting: average cost of 300-500 EUR/month in consumables (sand + filters + operator protection + hazardous waste), plus 30-60 minutes of cabin cleaning after each session. Laser: zero consumables, zero post-operation cleaning. For a typical use of 4-6 hours/day, the annual saving exceeds 6,000-12,000 EUR, payback in 18-28 months from direct operational savings alone.
Can I use the continuous portable laser cleaning machine LAZIRON C in an open workshop or do I need a cabin?
Technically yes, but we recommend at least laser protection curtains around the work area for laser class 4. For workshops with personnel constantly nearby, we recommend a simple cabin (black absorbent curtains) costing 1000-2500 EUR, vastly more affordable than a blasting cabin. The operator uses protective goggles specific to the 1064 nm wavelength.
What is the difference between the continuous portable laser cleaning machine LAZIRON C and the pulsed variant LAZIRON CP?
C (continuous): higher speed on thick contaminants (paint, heavy oxides), lower price, recommended for volume production workshops. CP (pulsed): fine control on delicate materials (archaeological cleaning, monuments, antiques), minimal risk of heating the base metal, price 25-35% higher. For typical industrial applications (auto workshop, maintenance, post-welding), C is sufficient and more cost-effective.
What laser power should I choose for the continuous portable laser cleaning machine?
For oil, dust, light deposits: 1000 W is sufficient and the most energy-efficient. For standard rust on steel and pre-painting preparation: 1500-2000 W. For thick paint, weld oxides on stainless steel or heavy industrial deposits: 3000 W. The 3000 W source offers the best speed-versatility ratio for workshops with a varied mix of contaminants.
What delivery, installation and training are included?
Transport and commissioning are included in the purchase price across Romania, together with initial operator training. For other destinations, delivery is quoted per order.
ROI calculation for a continuous portable laser cleaning machine LAZIRON
The decision to invest in a continuous portable laser cleaning machine is not made on technical specifications alone, what matters is how the equipment translates into real monthly cash-flow figures for your workshop.
For workshops that currently subcontract the equivalent operations at 2026 European market prices, bringing them in-house with a continuous portable laser cleaning machine LAZIRON reduces the effective cost per operation by 50-70%. At a typical monthly volume run in-house instead of subcontracted, the investment is recovered in 18-30 months under current market conditions in Europe.
The additional margin comes from three directions: savings versus subcontracting, offering services to local external clients at market prices, and reducing delivery times to end clients by 40-60%, which allows premium prices on urgent orders or short deadlines.
Why choose UZINEX for a continuous portable laser cleaning machine
LAZIRON is built on a clear philosophy: premium industrial-grade quality at a price any serious workshop can sustain, not just large factories with multi-million-euro budgets for CAPEX investments.
• Affordable price for premium laser technology, the critical components (fiber source, portable head, S&A chiller) are the ones used by premium manufacturers, but the LAZIRON package costs 35-45% less than European alternatives at the same power.
• 60-month warranty, with on-site service intervention in under 24 hours anywhere in Romania.
• Technical support and service, phone support, spare parts and on-site intervention in under 24 hours anywhere in Romania.
• Free pre-delivery inspection, with a live test on your reference material and an acceptance report.
• European funds compatibility, meets the requirements of PNRR, ERDF and national funds for the green transition and the elimination of polluting consumables.
• Standards-compliant components, the fiber source meets the reliability specifications of the leading manufacturers on the world market.
The critical components in the standard configuration meet the reliability specifications set by the leaders of the laser industry, with a stated life of over 100,000 hours of operation on the fiber source.
See the entire LAZIRON range of industrial equipment to compare models and request a personalized offer.
The continuous portable laser cleaning machine LAZIRON C turns the key operations of the workshop into a real competitive advantage: premium-level quality, sustained productivity and an affordable investment for any workshop that wants to grow without doubling its fixed cost structure.
