The VS-1800B is an automatic acrylic bender machine with an 1800 mm working length, ideal for shops making large parts that need an acrylic bender machine with long reach. It hot-bends acrylic, PVC, PC, PP and other thermoplastics at angles from 30° to 180°.
The infrared heating system, thickness-based adjustment and automatic or manual mode make this acrylic bender machine a precise, repeatable solution for sheets from 0.8 to 20 mm.
Key Advantages, VS-1800B
• Precise bending at any angle, a MECVORA acrylic bender machine forms angles from 30° to 180° on one machine, with straight, repeatable bend lines for identical parts batch after batch.
• Infrared heating, the infrared radiation system heats evenly and lasts longer than classic filament elements, cutting waiting times between bends.
• Adjustable by thickness, the softening gap adjusts to the sheet thickness, and temperature and voltage are set per material, for clean results from 0.8 to 20 mm.
• Multiple materials, the same machine bends acrylic, PVC, PC, PP and other thermoplastics, covering most signage and décor projects from a single tool.
• Safe operation, water circulation protects the components and an overheating alarm stops the process when the temperature is exceeded, protecting both operator and machine.
• Automatic and manual, automatic mode raises series productivity, while manual mode gives fine control for one-off parts or prototypes, both driven from the CNC panel.
• 1800 mm working length, allows large light box sides and displays from a single bend, with no joints, on a 90″ × 18″ footprint.
• Large parts, no compromise, ideal for long panels and edging, where shorter models would force segmenting and joints.
• Groove only above 6 mm, sheets of 0.8–6 mm bend with no groove; between 6 and 20 mm a groove is cut along the bend line.
Technical Specifications, Acrylic bender machine
| Parameter | Value |
|---|---|
| Working length | 1800 mm (71″) |
| Materials | acrylic, PVC, PC, PP (and PE, PS, ABS) |
| Bending thickness | 0,8–20 mm |
| Bending angle | 30°–180° |
| Heating system | infrared |
| Footprint | 90″ × 18″ |
| Cooling | water circulation + overheating alarm |
| Control | automatic and manual (CNC) |
| Thickness without groove | 0.8–6 mm (6–20 mm with groove) |
Technology and Process
Hot bending of acrylic relies on localised heating of a line on the sheet: the material softens exactly where it must bend, then it is formed to the desired angle, between 30° and 180°. A MECVORA acrylic bender machine controls the temperature and the width of the heated zone precisely, so the bend line is clean, with no scorching or bubbles.
For thin sheets, from 0.8 to 6 mm, no groove is needed; from 6 mm up to 20 mm a groove is cut along the bend line. The infrared heating system and the per-material settings give repeatability from one part to the next, essential in series production for signage and décor.
Applications and Industries, Acrylic bending
In signage, the VS-1800B produces large light box sides and frames, acrylic letters and panels, with long, straight bends.
In interiors and décor, the machine makes long edging, stands, shelves and displays, corners and generously sized boxes, from a wide range of thermoplastics.
In production and industry, the same tool bends large guards and enclosures for production lines, protection panels and storage boxes, fast and repeatably.
The machine meets the requirements applicable to industrial equipment placed on the EU market, in line with the Machinery Directive 2006/42/EC. See also our range of acrylic bending machines for other configurations.
Compatible Materials
The VS-1800B bends a wide range of thermoplastic materials, in thicknesses from 0.8 to 20 mm:
| Material | Details / notes |
|---|---|
| Acrylic (PMMA) | 0.8–20 mm |
| PVC | 0.8–20 mm |
| Polycarbonate (PC) | 0.8–20 mm |
| Polypropylene (PP) | 0.8–20 mm |
| PE / PS / ABS | depending on thickness |
How It Works
The workflow on a MECVORA acrylic bender machine is simple and repeatable, from sheet to finished part:
1. Place the sheet on the work table and align the bend line with the heating zone.
2. Select the heating temperature and time according to acrylic, PVC, PC and PP and the sheet thickness.
3. The infrared element locally heats the bend line until the material softens evenly.
4. The sheet is bent to the programmed angle, between 30° and 180°, automatically or manually from the CNC panel.
5. The part cools and sets its shape, ready for assembly into light boxes, letters, displays or other products.
Safety and Reliability in Use
In a shop working in shifts, safety and reliability matter as much as precision. The water-circulation cooling protects the electronics, and the overheating alarm stops the process when the set threshold is exceeded, preventing damage to the material and the machine.
Infrared heating, with a longer life than filament elements, reduces stops for replacements. This keeps a acrylic bender machine productive for long periods, while the operator works safely, with a simple control panel and settings that can be saved per material.
The working length sets the maximum part size: models with a longer table allow large light box sides and displays from a single bend, with no joints. Choosing the right length for your usual products avoids both limitations and needless investment in an oversized machine.
Delivery, Installation and Support
A acrylic bender machine is a long-term investment, and UZINEX treats it as one. We arrange transport of the machine across Europe together with the required technical documentation, and we handle commissioning at your premises so production starts without delays or improvisation.
After installation we train your operators directly on your own machine, from the first settings on material to fine-tuning each working recipe. We stay available for service, spare parts, consumables and technical support throughout the machine's working life.
Return on Investment
Outsourcing production means longer lead times, margins shared with subcontractors and dependence on their availability. Bringing the work in-house, onto a acrylic bender machine, changes the equation: you control the deadline, the quality and the cost of every order, and the profit stays entirely with you.
For firms with a steady order flow, such a machine pays back quickly through the number of parts produced in-house, plus the new orders you can take on without depending on an outside supplier. The UZINEX team helps you estimate the right volume and configuration for your case.
Maintenance and Reliability
A production machine has to be easy to maintain to stay productive. Routine tasks, checking the heating elements, cleaning the working surfaces and verifying the protection systems, are simple and quick, and wear parts are replaced without complex intervention.
UZINEX supplies spare parts, consumables and technical support throughout the machine's life, so a well-maintained acrylic bender machine runs for years with the same precision. A simple maintenance plan reduces unplanned downtime and protects the investment.
Frequently Asked Questions
What part sizes does the 1800 mm model cover?
The 1800 mm (71″) working length allows large light box sides, panels and displays from a single bend, with no joints. For even longer parts there is a 2400 mm model.
What acrylic thicknesses can it bend?
It bends sheets from 0.8 to 20 mm. Up to 6 mm no groove is needed; between 6 and 20 mm a groove is cut along the bend line.
Does it bend materials other than acrylic?
Yes. Besides acrylic, it bends PVC, PC, PP, as well as PE, PS and ABS, with temperature and voltage settings per material.
What does delivery of a MECVORA acrylic bender machine include?
We arrange transport across Europe together with the technical documentation. We provide commissioning, operator training and ongoing support for service and spare parts, so your shop becomes productive quickly.
Do I need a specialised operator for this acrylic bender machine?
No. The settings are simple and saved per material and thickness, and the control panel is intuitive. A new operator reaches consistent results after short training, and the saved recipes reduce errors.
What warranty and after-sales support does UZINEX offer?
Every UZINEX machine comes with a 60-month standard manufacturer warranty, phone support and on-site service intervention in under 24 hours anywhere in Romania.
Why UZINEX?
When you choose a acrylic bender machine from UZINEX, you get more than the machine. You can discuss the right configuration any time with the UZINEX team:
• Real technical advice, we help you choose the right acrylic bender machine configuration for your materials, part sizes and production volume, not just process an order.
• Delivery across Europe, we arrange transport of the machine to your workshop, together with its technical documentation.
• Commissioning and training, we train your operators on your own machine, from the first settings to the first good part.
• Service and spare parts, we provide technical support and access to components so your production keeps running.
• Sourcing on request, if you need a configuration or consumable that isn't listed, we source it and come back with an offer.
• A long-term partner, we stay with you from installation to capacity expansion as your order book grows.
Whether you make acrylic letters, light box faces and frames, displays or decorative parts, a acrylic bender machine brings bending in-house, with precise, repeatable angles. Talk to the UZINEX team about your materials and sizes, and we will recommend the working length and configuration that fit your production volume.
