2,000 W handheld laser welding machine, air-cooled, for stainless and steel up to 8.5 mm and aluminium up to 6.5 mm. Supplied with the T1 wire feeder.
| Same 500 mm seam | TIG welding |
| Working time | 2:53 min |
| Filler wire (316L) | 1,000 mm, 2.0 mm |
| Shielding gas | 34.6 l argon |
| Electricity | 1.1 kWh |
| Parameter | Value |
| Laser type | Continuous-wave (CW) fiber laser, class 4 |
| Laser power | 2,000 W (± 50 W) |
| Wavelength | 1,080 ± 10 nm |
| Fiber core | 20 µm |
| Power control | 10–100 % |
| Cooling | Air, no chiller |
| Penetration, stainless steel | up to 8.5 mm |
| Penetration, carbon steel | up to 8.5 mm |
| Penetration, aluminium | up to 6.5 mm |
| Focused spot diameter | 69.4 µm |
| Rayleigh length | 2.8 mm |
| Divergence angle | 21.8 mrad |
| Beam oscillation width | 0–4 mm |
| Display | 7-inch touchscreen |
| Torch | Aluminium alloy, 680 g, 72° grip angle |
| Interfaces | DB25 for external control, RS232 for remote support, wire feeder socket |
| Laser compliance | IEC 60825-1 / EN 60825-1 |
| Wire feeder | THEO T1 included, 0.8–1.6 mm wire |
| Warranty | 60 months |
The THEO MA1 ULTRA handheld laser welder has a 2,000 W continuous-wave fiber laser source, fully air-cooled. It welds stainless and carbon steel up to 8.5 mm and aluminium up to 6.5 mm, with the T1 wire feeder included in the price.
It is the most powerful machine in the MA1 series and holds its power under load: in a test at 26 °C with 100 % power requested, it delivered 1,970 W measured. On thin sheet the same power means high welding speed, and with the TD1 double wire feeder penetration grows by up to another 1.5 mm.
In the video above, a TIG welder and a THEO MA1 operator weld the same part: 1.4301 (AISI 304) stainless, a T-joint in 2 mm sheet, a 500 mm seam. The TIG welder finishes in 2 minutes 53 seconds, the handheld laser welder in 29 seconds.
| Same 500 mm seam | TIG welding | THEO MA1 |
|---|---|---|
| Working time | 2:53 min | 0:29 min |
| Filler wire (316L) | 1,000 mm, 2.0 mm | 348 mm, 1.0 mm |
| Shielding gas | 34.6 l argon | 7.25 l nitrogen |
| Electricity | 1.1 kWh | 0.1 kWh |
That is 83 % less time, 79 % less gas and 91 % less energy, before counting the cleaning and straightening that follow TIG welding. The laser seam comes out narrow and clean, with no discoloration left to finish.
| Parameter | Value |
|---|---|
| Laser type | Continuous-wave (CW) fiber laser, class 4 |
| Laser power | 2,000 W (± 50 W) |
| Wavelength | 1,080 ± 10 nm |
| Fiber core | 20 µm |
| Power control | 10–100 % |
| Cooling | Air, no chiller |
| Penetration, stainless steel | up to 8.5 mm |
| Penetration, carbon steel | up to 8.5 mm |
| Penetration, aluminium | up to 6.5 mm |
| Focused spot diameter | 69.4 µm |
| Rayleigh length | 2.8 mm |
| Divergence angle | 21.8 mrad |
| Beam oscillation width | 0–4 mm |
| Display | 7-inch touchscreen |
| Torch | Aluminium alloy, 680 g, 72° grip angle |
| Interfaces | DB25 for external control, RS232 for remote support, wire feeder socket |
| Laser compliance | IEC 60825-1 / EN 60825-1 |
| Wire feeder | THEO T1 included, 0.8–1.6 mm wire |
| Warranty | 60 months |
The MA1 series uses actively controlled air cooling: sensors track the system temperature and adjust the airflow in real time, so the source delivers the requested power from the first second of the shift to the last. The machine runs at ambient temperatures up to 45 °C, with no water to change, no condensation and no deposits in a cooling circuit.
Overheating shifts the focus in the optics and lowers the laser power, and it shows in the seam as porosity and uneven penetration. The diodes sit in gold-plated modules with a service life of more than 100,000 hours, and the MA1 thermal control keeps the beam stable for the whole job.
The torch weighs 680 g and has a 72° grip angle, so the operator works for hours without a tired hand. The emission trigger, the wire feed button and the status LED sit on the torch, and the wire nozzle is mounted directly on the focus tube: when you change the focus, the nozzle stays aligned, with no tools and no adjustment.
A galvo mirror oscillates the beam over 0–4 mm. The wobble stop function puts the energy in the centre of the weld pool, giving a V-shaped seam with a small heat-affected zone, no spatter and no distortion to correct afterwards.
• Double trigger: emission starts only after a two-step sequence.
• Contact control: through the ground clamp, the machine checks contact with the part before emission.
• PPE detection: with the THEO VIZ-R helmet, two sensors confirm the helmet is worn correctly.
• Door interlock: a dual-channel circuit connects to the door switch of the THEO BAY enclosure.
In basic mode you choose the material, the thickness and the joint type, and the machine proposes the parameters, so a new operator lays the first welds within minutes. Expert mode opens every energy and wire parameter and shows the machine status on the same 7-inch touchscreen. Settings are saved as programs for repeatable results on the same part.
• Heavy steel structures and fabrication in 6–8 mm steel.
• Thick aluminium for bodies, trailers and marine work.
• Industrial machinery and equipment, with long seams and deep penetration.
• Workshops that want maximum speed on thin sheet as well, with the same machine.
• The THEO MA1 ULTRA laser welding machine, with torch and torch holder.
• The THEO T1 wire feeder, with its connection cable.
• A wire liner and a set of wear parts.
• Two pairs of laser safety glasses, welding gloves, the control cable and the gas hose.
• The operator manual.
MA1 ULTRA tops the range, for 8.5 mm stainless and steel and 6.5 mm aluminium. If your parts stay below 6.5 mm, the 1,500 W MA1-65 lays the same welds for a lower price.
All models share the same air cooling, the same torch and the same display, so operators move from one machine to another without new training.
22,482 EUR + VAT, with the T1 wire feeder included. The THEO ecosystem accessories go on the same quote: the VIZ-R2 laser welding helmet at 479 EUR + VAT, the iPRO Amber laser safety glasses at 178 EUR + VAT, the CART V2 trolley at 873 EUR + VAT and the BAY welding enclosure from 5,382 EUR + VAT. An optional Cobot Code licence prepares the machine for work on a collaborative robot arm.
The machine can also be leased or included in EU-funded projects, for which we prepare the technical documentation.
• Transport, commissioning and operator training included across Romania.
• 60-month warranty, standard across the catalog.
• On-site service within 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for public tenders and for EU-funded projects.
• Technical advice on your own parts before you order.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.





Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.