Electric jaw crusher on rubber tracks, 10–60 t/h, 320 × 400 mm opening, 0–70 mm product, 30 kW jaw motor, 380 V, 2.9 t.
| Type | electric jaw crusher, on rubber tracks |
| Capacity | 10–60 t/h |
| Feed opening | 320 × 400 mm |
| Output size | 0–70 mm |
| Crusher power | 30 kW at the jaw, 36 kW total |
| Power supply | three-phase 380 V, Chint electrics |
| Consumption | about 32 kWh |
| Hopper | 0.7 m³ |
| Conveyors | 400 × 2400 mm |
| Feeding height | 2140 mm |
| Dimensions | 3800 × 1500 × 2140 mm |
| Mobility | rubber tracks, 2–3 km/h |
| Weight | 2.9 t |
The UZX-OP-30 is an electric tracked jaw crusher, powered from a 380 V three-phase supply. The 320 × 400 mm opening takes concrete, stone and brick and makes 10–60 t/h of 0–70 mm product.
The jaw motor is 30 kW and consumption is about 32 kWh. Without a diesel engine the machine is quiet and emits no exhaust, so it can work in town and in halls. It weighs 2.9 t and is controlled by remote or from the panel.
| Parameter | Value |
|---|---|
| Type | electric jaw crusher, on rubber tracks |
| Capacity | 10–60 t/h |
| Feed opening | 320 × 400 mm |
| Output size | 0–70 mm |
| Crusher power | 30 kW at the jaw, 36 kW total |
| Power supply | three-phase 380 V, Chint electrics |
| Consumption | about 32 kWh |
| Hopper | 0.7 m³ |
| Conveyors | 400 × 2400 mm |
| Feeding height | 2140 mm |
| Dimensions | 3800 × 1500 × 2140 mm |
| Mobility | rubber tracks, 2–3 km/h |
| Weight | 2.9 t |
The mini crusher has a crushing jaw, a small feed hopper and a discharge conveyor with adjustable height. It is fed with a mini excavator or a loader, moves on tracks by remote control or from the panel, and fits through yard gates and onto narrow sites. The jaw plates are easy to change when worn.
Low cost per tonne where mains power is available, with no diesel and no engine oil changes.
No exhaust, so it also works in halls or near homes.
The 2.4 m belt builds a tall stockpile right next to the machine.
It is used for urban demolition, for recycling concrete and stone in yards and depots with three-phase power, for producing 0–70 mm aggregate and for backfill from recycled rubble.
The first criterion is the material. For hard rock (granite, basalt, river stone) and reinforced concrete, choose a jaw crusher. For concrete, asphalt and medium rock with a cubical product, choose the UZX-UIC-80 impact crusher. For fines below 10 mm from rubble, choose the UZX-UHC-600. The second criterion is output. The UZX-OP mini crushers and the UZX-UJC-425 make 5–80 t/h, for yards and small demolition. The UZX-UJC-503 … UZX-UJC-805 make 10–100 t/h, and the UZX-UJC-106, 116, 906 and 96E make 60–500 t/h in quarries. The third criterion is mobility: on tracks, on a towed trailer (UZX-UTC-503, UZX-UTC-604) or with an electric motor on mains power (UZX-OP-20, 30, 50).
The price depends on the model, the engine and the equipment: magnetic separator, side conveyor, spare jaw plates, remote control. Send us the material, the feed size, the product size you need and the tonnes per hour, and a Uzinex engineer will quote the right configuration. Delivery, commissioning and operator training are included in Romania.
• Delivery and commissioning included, at your site, with operator training.
• 60-month warranty, standard across the whole catalogue.
• Service with nationwide coverage in Romania, on-site visit within 24 hours.
• Spare parts in stock, so a breakdown does not stop the job.
• Technical documentation for EU-funded projects, PNRR and public tenders (SEAP/SICAP).
• Configuration on request: jaw plates, side conveyor, magnetic separator and the right engine for your site.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
