SDEC G21 diesel generator set in four ratings, from 40 to 68 kVA prime (44–75 kVA standby), three-phase 230/400 V, 50 Hz.
Choose the power, the execution and the transfer panel. You get a quote for exactly the configuration you picked.
| Rating | Engine |
| GK-40 | 4ZT3.2-G21 |
| GK-50 | 4ZT3.5-G21 |
| GK-60 | 4ZT4.1-G21 |
| GK-68 | 4ZTAA4.1-G21 |
The SDEC G21 generator set covers 40–68 kVA in four ratings, each with its own engine: 40, 50, 60 and 68 kVA. It is a three-phase GENKRAFT diesel generator for workshops, farms, office buildings, shops and construction sites, as backup when the grid fails or as the main source where the grid does not reach. It runs at 230/400 V and 50 Hz.
You choose the rating in the configurator on this page, then the enclosure and the automation panel. Uzinex engineers check the sizing against your loads before quoting.
The 40 kVA set delivers 32 kW prime power and the 68 kVA set delivers 54 kW. In between are the 50 kVA (40 kW) and 60 kVA (48 kW) ratings. Standby power is about 10% above prime and is used only during a grid outage.
| Rating | Engine | Prime power | Standby power | Voltage |
|---|---|---|---|---|
| GK-40 | 4ZT3.2-G21 | 40 kVA / 32 kW | 44 kVA / 35 kW | 230/400 V |
| GK-50 | 4ZT3.5-G21 | 50 kVA / 40 kW | 55 kVA / 44 kW | 230/400 V |
| GK-60 | 4ZT4.1-G21 | 60 kVA / 48 kW | 66 kVA / 53 kW | 230/400 V |
| GK-68 | 4ZTAA4.1-G21 | 68 kVA / 54 kW | 75 kVA / 60 kW | 230/400 V |
Add up the loads that run at the same time and compare the total with the prime power of the rating, not the standby power. Leave a margin for starting electric motors, which draw several times their rated current at start-up: pumps, compressors, fans, machines.
On three-phase generators, 1 kVA is roughly 0.8 kW. For a load of about 40 kW, the 60 kVA rating leaves room to grow. Below 30 kW, the SDEC G11 38 kVA set is enough, and above 54 kW the next step is the SDEC G31 75 kVA set.
• Open frame, for installation in a ventilated plant room.
• Soundproof canopy, for outdoor installation with reduced noise.
• Containerised, for exposed sites or long-term installations.
• Optional ATS panel: the set starts on its own when the grid fails, takes over the load and hands it back to the grid when power returns.
• Delivery and commissioning included in Romania, with operator training.
• 60-month warranty, standard across the catalogue.
• Nationwide service, on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Spare parts in stock and technical documentation for EU-funded, PNRR and public procurement files.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.