This mini excavator offers the advantages of flexibility and practicality, high-end configuration, high performance, con…
| Type | Compact tracked mini excavator with dozer blade |
| Operating weight | 980 kg |
| Engine | Changcai EV80 |
| Rated power | 14 kW / 2.400 rpm |
| Engine torque | 48 Nm / 2.400 rpm |
| Fuel consumption | 0,794 L/h (theoretical) |
| Bucket digging force | 13,9 kN |
| Arm digging force | 8,8 kN |
| Maximum tractive force | 15 kN |
| Hydraulic system pressure | 25 MPa |
| Hydraulic system flow | 8,5 L/min |
| Maximum travel speed | 3,5 km/h |
| House slewing speed | 16 rpm |
| Maximum digging depth | 1.400 mm |
| Maximum digging height | 2.490 mm |
| Maximum dumping height | 1.750 mm |
| Minimum slewing radius | 1.190 mm |
| Standard bucket capacity | 0,025 m³ |
| Dozer blade: height / depth | 325 mm / 175 mm |
| Overall length | 2.550 mm |
| Chassis width | 1.020 mm |
| Overall height | 1.380 mm |
| Track width | 180 mm |
| Ground clearance | 380 mm |
| Fuel tank capacity | 12 L |
| Coupling type | Rear (Backhoe) |
Monde 1.5T greenhouse mini excavator: the compact machine engineered specifically for spaces with limited height and width where standard excavators cannot operate. Weighing 980 kg, with a chassis width of 1.020 mm and a consumption of just 0,79 L/h, this greenhouse mini excavator works efficiently in the aisles of commercial greenhouses, covered gardens, urban parks and any urban site with restricted access.
A digging force of 13,9 kN, a hydraulic pressure of 25 MPa and a slewing speed of 16 rpm clearly set it apart from sub-1-tonne models: real working capacity in a compact format that does not require widening existing access routes. The 1.400 mm depth covers all irrigation, drainage and utility trenches in horticultural and residential developments. Key advantages of the Monde 1.5T greenhouse mini excavator
• Consumption 0,79 L/h: the most economical in its class. The extremely low theoretical consumption makes this greenhouse mini excavator ideal for use in enclosed spaces where ventilation is limited and long-term operating costs matter.
• Hydraulic pressure 25 MPa: one of the highest in the sub-1-tonne class. It allows the use of demanding hydraulic attachments (breaker, sorting bucket, tilt bucket) without any loss of performance.
“It allows the use of demanding hydraulic attachments (hammer, sorting bucket, tilt bucket) with no loss of performance.”
• Digging force 13,9 kN: nearly double that of 800 kg models. It digs efficiently in compact, clay or gravelly soils, typical of the ground beneath commercial greenhouses.
• Integrated dozer blade: the front blade (height 325 mm, depth 175 mm) allows ground levelling and pushing of excavated material without changing the attachment. A rare feature in the sub-1-tonne class.
• Travel speed 3,5 km/h: faster movement between work points compared with slower models in the class, delivering higher productivity on jobs with frequent repositioning.
• Minimum slewing radius 1.190 mm: full rotation in extremely narrow spaces, without obstructing the greenhouse structure or adjacent installations.
• Compatible with quick couplers and tilt buckets: fast, tool-free attachment changes directly from the operating position. Maximum versatility for multiple applications on the same site.
• 60-month warranty: extended coverage for a greenhouse mini excavator in intensive commercial use, with spare parts in stock at UZINEX.
Technical specifications: Monde 1.5T greenhouse mini excavator
| Parameter | Value |
|---|---|
| Model | Monde 1.5T |
| Type | Compact tracked mini excavator with dozer blade |
| Operating weight | 980 kg |
| Engine | Changcai EV80 |
| Rated power | 14 kW / 2.400 rpm |
| Engine torque | 48 Nm / 2.400 rpm |
| Fuel consumption | 0,794 L/h (theoretical) |
| Bucket digging force | 13,9 kN |
| Arm digging force | 8,8 kN |
| Maximum tractive force | 15 kN |
| Hydraulic system pressure | 25 MPa |
| Hydraulic system flow | 8,5 L/min |
| Maximum travel speed | 3,5 km/h |
| House slewing speed | 16 rpm |
| Maximum digging depth | 1.400 mm |
| Maximum digging height | 2.490 mm |
| Maximum dumping height | 1.750 mm |
| Minimum slewing radius | 1.190 mm |
| Standard bucket capacity | 0,025 m³ |
| Dozer blade: height / depth | 325 mm / 175 mm |
| Overall length | 2.550 mm |
| Chassis width | 1.020 mm |
| Overall height | 1.380 mm |
| Track width | 180 mm |
| Ground clearance | 380 mm |
| Fuel tank capacity | 12 L |
| Coupling type | Rear (Backhoe) |
Why the Monde 1.5T is the benchmark greenhouse mini excavator
Commercial greenhouses impose very specific conditions on a digging machine: a tightly controlled maximum width so as not to damage the lateral metal structures, a low height to operate beneath the polycarbonate or glass roof, minimum consumption so as not to overload ventilation, and low emissions so as not to affect the crops.
Operating weight 980 kg
14 kW at 2,400 rpm
Application dedicated to flows with constant quality requirements.
This greenhouse mini excavator, with a width of 1.020 mm and a height of 1.380 mm, fits within the standard aisles of modern commercial greenhouses, built with 1.200–1.500 mm openings between rows. The 0,79 L/h consumption is one of the lowest in the compact excavator category, significantly reducing the need for forced ventilation during indoor operation.
The integrated dozer blade rounds out the profile of a complete greenhouse mini excavator: it digs, removes the soil and levels the ground in the same pass, without attachment changes or additional repositioning. Suitable applications for the Monde 1.5T greenhouse mini excavator
The Monde 1.5T is the greenhouse mini excavator of choice when working conditions combine limited space with real requirements for digging force and versatility.
Horticultural producers and greenhouse-fitting companies use it to install underground irrigation systems, drain the perimeter of greenhouse bases, replace the soil layer when renovating crops, and excavate foundations for extensions or new installations. The 13,9 kN force allows working in soils compacted by long-term use without damaging the existing greenhouse structure.
Commercial gardeners and landscapers working in covered green spaces choose this greenhouse mini excavator for its flexibility: quick couplers and tilt buckets allow rapid transition between digging, levelling and material handling within the same working day, without moving the machine to a workshop to change attachments.
On urban sites with narrow access (alleys between buildings, interior courtyards, underground corridors) the Monde 1.5T handles utility works (sewerage, cables, gas) at depths of up to 1,4 m, with a higher work rate than 800 kg models thanks to its nearly double digging force. Dozer blade: an exclusive feature in the sub-1-tonne class
The presence of an integrated dozer blade on this greenhouse mini excavator is a genuine operational advantage over competing models in the sub-1-tonne class, which generally do not include this feature.
In practice, the dozer blade enables three additional operations without changing the attachment: levelling the surface after excavation, pushing the excavated soil toward the edge of the trench for easier removal, and stabilising the machine on a gentle slope by anchoring the blade into the ground.
For an operator working in a greenhouse or in a narrow space where manoeuvring is difficult, the ability to level and compact the ground with the same greenhouse mini excavator significantly reduces the total working time per site. Frequently asked questions about the Monde 1.5T greenhouse mini excavator
What minimum aisle width does the Monde 1.5T need to operate?
The chassis width is 1.020 mm. For comfortable operation with full rotation, an aisle of at least 1.200 mm is sufficient. The minimum slewing radius of 1.190 mm allows the house to rotate fully in spaces with close lateral obstacles, an essential characteristic for a greenhouse mini excavator in standard growing aisles. How safe is it to operate indoors given the emissions?
The 0,79 L/h consumption of this greenhouse mini excavator generates significantly lower emissions than machines that consume 3–5 L/h. For use in greenhouses with natural or standard forced ventilation, operating in cycles of 1–2 hours with airing breaks is common practice. UZINEX recommends consulting local safety regulations for working with combustion engines in enclosed spaces. Can the engine be replaced with an electric variant?
In its standard configuration, the Monde 1.5T is equipped with a Changcai EV80 combustion engine. If you have specific requirements for 100% electric operation in a greenhouse, UZINEX engineers can evaluate the options available at the time of purchase. Free technical consultancy here. What is the difference compared with the 800 kg Monde 08?
The Monde 08 prioritises absolute minimum size (720 mm width, 800 kg) for access into extremely narrow spaces. The Monde 1.5T brings nearly double the force (13,9 kN vs 7,5 kN), higher hydraulic pressure (25 MPa vs 14 MPa), an integrated dozer blade and higher travel speed (3,5 km/h vs 2,2 km/h). You choose the Monde 1.5T greenhouse mini excavator when digging force and versatility matter more than the absolute minimum footprint. Spare parts and service: how does it work?
UZINEX keeps spare parts for the Monde 1.5T in stock in Iași, with nationwide delivery. The service technician network covers all of Romania with a response time of 24–48 hours. Full details on the technical support page. Is it eligible for European funding?
Yes. UZINEX is a member of the Enterprise Europe Network and supplies equipment for projects financed through PNRR and structural funds, including for the agricultural and horticultural sector. Complete technical documentation is provided on request. Leasing options are available on the credit and leasing page. Why UZINEX for a greenhouse mini excavator
Purchasing a greenhouse mini excavator for commercial use is an investment that must run without interruption during the working season. UZINEX covers after-sales support in full.
• 60-month warranty: extended coverage for a greenhouse mini excavator in intensive commercial use.
• Transport and commissioning included: delivery anywhere in Romania, installation, testing and operator training at no additional cost.
• Spare parts in stock: components available immediately in Iași, with no waiting times for imports.
• Nationwide technical support 24–48 hours: a network of technicians with national coverage and a guaranteed response time.
• AI-powered manuals: interactive documentation for rapid diagnostics, accessible directly from your phone in the greenhouse or on site.
• Eligible for European funding: including programmes dedicated to the agricultural and horticultural sector.
The Monde 1.5T is the greenhouse mini excavator chosen by horticultural producers, landscapers and construction firms that need real digging force in a format accepted by any commercial greenhouse, backed by a partner offering complete services after delivery.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
