Projects with tight deadlines, temporary sites and difficult terrain demand an installation that assembles fast and can be relocated, without months of construction.
| Theoretical production capacity (m³/h) | 50 |
| Mixer discharge volume (L) | 1000 |
| Mixer feeding volume (L) | 1500 |
| Mixer power (kW) | 18.5×2 |
| Discharge height (m) | 4.1 |
| Aggregate bin configuration (no. × volume, m³) | 3×10 |
| Cycle period (s) | 60 |
| Maximum aggregate size (mm) | 60/80 |
| Cement silo (optional) | 2×100 |
| Aggregate weighing accuracy | ±2% |
| Powder weighing accuracy | ±1% |
| Water weighing accuracy | ±1% |
| Additive weighing accuracy | ±1% |
| Total power (kW) | ≤110 |
| Control mode | Fully Automated Computer (PC) Control |
| Power supply | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases |
| Advantage | Benefit |
| Relocation cost | Up to 50% lower than traditional plants |
| Ease of maintenance | 90% of maintenance operations done at ground level |
| Wear-part replacement | Replacing mixing blades takes less than 2 hours |
| Structure lifespan | Container shell and steel structure last over 15 years |
| Residual value | Resale value 30% higher than traditional plants |
Projects with tight deadlines, temporary sites and difficult terrain demand an installation that assembles fast and can be relocated, without months of construction. A modular concrete batching plant from URSTAG, of the quick-install type, answers exactly this need: 90% of the modules are pre-assembled and debugged at the factory, transported in standard ISO container dimensions and bolted together on site, becoming operational within 7-15 days, compared with 1-3 months for traditional plants.
A URSTAG modular concrete batching plant is available in six configurations, from 50 to 180 m³/h, including container-type variants. Foundation-free deployment, intelligent PLC control and green production systems make it ideal for frequent relocation and high environmental requirements. Explore the full range of industrial equipment and the solutions for concrete production.
• Complete modularity, a modular concrete batching plant has all modules (mixing layer, weighing layer, control room) pre-assembled at the factory and quickly connected on site via bolts.
• Operational in 7-15 days, rapid assembly cuts commissioning time from 1-3 months (traditional plants) to just 7-15 days.
• Foundation-free deployment, the rigid chassis allows direct placement on level ground (bearing capacity > 150 kPa), without building a concrete foundation, ideal for difficult terrain such as deserts or permafrost.
• ISO standard transport, the entire plant is designed to standard container dimensions (20ft, 40ft), allowing direct transport by sea, rail or road.
• Intelligent PLC control, dual-password access management, dynamic data tracking and remote monitoring.
• High-precision weighing, three independent weighing systems (powder, aggregate, additive) with accuracy exceeding 99%.
• Green production, multi-stage dust removal, wastewater recycling and a low-noise enclosure.
• Low relocation cost, moving and packaging costs are up to 50% lower than for traditional plants.
| Parameter | UMB-50 | UMB-70 | UMB-100 | UMB-120 (container) | UMB-150 | UMB-180 (container) |
|---|---|---|---|---|---|---|
| Theoretical production capacity (m³/h) | 50 | 70 | 100 | 120 | 150 | 180 |
| Mixer discharge volume (L) | 1000 | 1250 | 2000 | 2000 | 2500 | 3000 |
| Mixer feeding volume (L) | 1500 | 1800 | 3000 | 3000 | 3750 | 4500 |
| Mixer power (kW) | 18.5×2 | 22×2 | 37×2 | 37×2 | 45×2 | 55×2 |
| Discharge height (m) | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 |
| Aggregate bin configuration (no. × volume, m³) | 3×10 | 3×15 | 4×15 | 4×20 | 4×25 | 4×25 |
| Cycle period (s) | 60 | 60 | 60 | 60 | 60 | 60 |
| Maximum aggregate size (mm) | 60/80 | 80/100 | 80/100 | 80/100 | 80/100 | 80/100 |
| Cement silo (optional) | 2×100 | 2×100 | 2×100 | 2×100 | 2×100 | 2×100 |
| Aggregate weighing accuracy | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% |
| Powder weighing accuracy | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Water weighing accuracy | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Additive weighing accuracy | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Total power (kW) | ≤110 | ≤130 | ≤180 | ≤220 | ≤250 | ≤260 |
| Control mode | Fully Automated Computer (PC) Control | Fully Automated Computer (PC) Control | Fully Automated Computer (PC) Control | Fully Automated Computer (PC) Control | Fully Automated Computer (PC) Control | Fully Automated Computer (PC) Control |
| Power supply | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases | 220V/415V/440V/380V, 50Hz/60Hz, 3 Phases |
A modular concrete batching plant is intended for projects with temporary sites, linear infrastructure works (roads, railways) that advance along long routes, sites in remote areas and operators who relocate equipment frequently between projects. The quick-install capability and foundation-free deployment turn the plant into a mobile asset, easy to move wherever concrete is needed.
Concrete production equipment is regulated in Europe with respect to safety and CE marking; a modular concrete batching plant delivered in Europe is designed in line with the requirements of the Machinery Directive 2006/42/EC. For integration into a complete concrete production flow, see also the complete industry solutions.
Rapid assembly is the defining advantage of a modular concrete batching plant: because 90% of the components are debugged and tested before leaving the factory, only the pipes and circuits remain to be connected on site. The modules, the mixing layer, the weighing layer and the control room, are bolted together, and the plant becomes operational within 7-15 days, dramatically accelerating the start of concrete production compared with traditional plants.
Foundation-free deployment of a modular concrete batching plant eliminates one of the most expensive and slow stages of traditional installation: pouring a concrete foundation. Thanks to the rigid chassis, the plant is placed directly on level ground with a bearing capacity above 150 kPa. This makes a modular concrete batching plant suitable for difficult terrain, deserts, permafrost, where building a foundation would be complicated or impossible.
ISO standard transport of a modular concrete batching plant simplifies international logistics: the entire plant is designed to standard container dimensions (20ft, 40ft), which allows direct transport by sea, rail or road, without special oversized shipments. This standardization reduces the cost and complexity of transport to any destination reachable by containerized freight.
The green production of a modular concrete batching plant meets the strictest environmental requirements: the multi-stage dust removal system (pulse-jet bag filter plus cyclone) keeps dust emissions below 30 mg/m³, under the 50 mg/m³ standard limit; wastewater recycling, through an aggregate separator and a sedimentation tank, achieves over 90% recovery; and the fully enclosed container shell reduces noise by 15-20 dB, allowing nighttime work in residential areas.
| Advantage | Benefit |
|---|---|
| Relocation cost | Up to 50% lower than traditional plants |
| Ease of maintenance | 90% of maintenance operations done at ground level |
| Wear-part replacement | Replacing mixing blades takes less than 2 hours |
| Structure lifespan | Container shell and steel structure last over 15 years |
| Residual value | Resale value 30% higher than traditional plants |
1. The pre-assembled modules arrive in standard ISO containers at the site.
2. The plant is placed on level ground, without a concrete foundation, thanks to the rigid chassis.
3. The modules (mixing, weighing, control) are connected via bolted joints.
4. Pipes and circuits are connected; the plant becomes operational within 7-15 days.
5. The PLC system coordinates batching, precision weighing and concrete mixing.
6. Homogeneous concrete is produced in the 60-second cycle, with remote monitoring.
The fully computer-controlled system coordinates the entire process, with dynamic data tracking and remote monitoring. Some configurations integrate AI algorithms that automatically adjust water content based on aggregate moisture, optimizing mixing parameters via IoT and reducing human intervention errors. A modular concrete batching plant produces consistent-quality concrete and is easy to relocate once the project is complete.
Which modular concrete batching plant capacity should I choose?
The choice depends on the required concrete output and the nature of the projects. UMB-50 and UMB-70 suit small projects and temporary sites; UMB-100 and UMB-120 suit medium works; UMB-150 and UMB-180 suit large infrastructure projects. The container-type variants (UMB-120, UMB-180) are optimized for relocation and standardized transport.
Does it really become operational in 7-15 days?
Yes. Because 90% of the components are pre-assembled and tested at the factory, only the pipes, circuits and bolted joints between modules remain to be connected on site. This rapid assembly cuts the commissioning of a modular concrete batching plant to 7-15 days, compared with 1-3 months for traditional plants that require a foundation and full on-site assembly.
Is it true that no concrete foundation is needed?
Yes. A modular concrete batching plant is designed with a rigid chassis that allows direct placement on level ground with a bearing capacity above 150 kPa, without pouring a concrete foundation. This eliminates an expensive, slow stage and makes the plant suitable for difficult terrain such as deserts or permafrost.
Is the delivered equipment new?
Yes. We deliver new, unused equipment, manufactured to order according to the chosen configuration. Construction uses components from established suppliers, with CE marking where applicable, and every plant undergoes a full inspection before shipment. You receive the technical documentation and operating manuals in your language.
How long do installation and commissioning take?
Thanks to modularity and foundation-free deployment, a modular concrete batching plant becomes operational within 7-15 days. Transport, module assembly, commissioning and operator training are included and carried out by a specialized team, so your plant starts production in a planned and rapid manner.
What expansion modules are available?
A modular concrete batching plant supports optional expansion modules: powder silo, additive system and sand-and-gravel separator. The number and volume of the aggregate bins are customized to your needs, allowing the plant to be adapted to the specific requirements of your projects.
How easy is it to relocate and maintain?
Relocation costs are up to 50% lower than for traditional plants, thanks to the modular design and containerized transport. For maintenance, 90% of operations are carried out at ground level, and replacing wear-prone parts, such as mixing blades, takes less than 2 hours, reducing downtime.
• Engineering modularity, 90% pre-assembled and tested at the factory, bolted rapid assembly, operational in 7-15 days.
• Foundation-free deployment, rigid chassis for direct placement on level ground, without building a concrete foundation.
• ISO standard transport, 20ft/40ft container dimensions, transport by sea, rail or road.
• Intelligent control, PLC with dual-password access, remote monitoring and adaptive AI/IoT adjustment.
• Green production, multi-stage dust removal below 30 mg/m³, over 90% water recovery and a 15-20 dB noise reduction.
• Full lifecycle value, 50% lower relocation cost, 90% of maintenance at ground level and a structure lifespan of over 15 years.
With a URSTAG modular concrete batching plant, of the quick-install type, operational in 7-15 days, foundation-free and transportable to ISO container standard, you obtain a flexible concrete production installation that is easy to relocate and compliant with the strictest environmental requirements, backed by intelligent PLC control and high value across the entire lifecycle.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
