High strength and longer service life. Building on the rock bucket, we add more steel plates for welding o…
| Available types | Standard, Heavy Duty, Rock Bucket, Multi-purpose, Clamshell |
| Capacity | 0,25 m³–20 m³ |
| Compatible excavators | 6 – 90 tonnes |
| Structural materials | Q345B, Q460, WH60A |
| Anti-wear materials | NM360, NM450, Hardox 400, Hardox 500 |
| Tooth systems | MTG, SBIC (premium) |
| Design | Double-cone: reduced penetration resistance |
| Capacity gain | +10% over equivalent standard-steel buckets |
| Reinforcement | Additional plates at the base and lower sides |
| Main applications | Mining, quarries, industrial demolition, heavy infrastructure |
The Monde mining excavator bucket is engineered for the most demanding conditions in mining operations, stone quarries and industrial demolition work. Where a standard construction bucket fails quickly on contact with hard rock and abrasive ore, the Monde mining excavator bucket holds up thanks to the selection of severe-duty steels.
Manufactured from Q345B, Q460, WH60A, NM360, NM450 and Hardox 400/500, each material selected specifically for the component and the type of load: structural strength, abrasive-wear resistance, or a combination of both properties.
Available in 5 distinct types (Standard, Heavy Duty, Rock Bucket, Multi-purpose, Clamshell), with capacities from 0,25 m³ to 20 m³ and compatibility with excavators from 6 to 90 tonnes, the Monde mining excavator bucket covers the entire range of machines used in mining and quarrying, from compact surface-mining excavators to heavy high-capacity excavators in surface mines. Key advantages of the Monde mining excavator bucket
• 5 specialized types for different applications. The Monde mining excavator bucket is not a single universal model but a range of 5 variants: Standard for mixed materials, Heavy Duty for hard rock and heavy loads, Rock Bucket with enhanced wear protection for abrasive rocks, Multi-purpose for diversified applications and Clamshell for dredging and loose materials. Each type of mining excavator bucket is optimized for the specific requirements of the application.
• Hardox 400/500, NM360/NM450: a material selection for severe duty. The Monde mining excavator bucket uses industrial-grade anti-wear steels: Hardox 400 (370–430 HB) and Hardox 500 (470–530 HB) for the zones of maximum wear, NM360 and NM450 for the components with mixed loads. Compared with the Q345B structural steel used for the structural components, the anti-wear steels extend the service life of the rock-contact zones by 4–6 times.
• Double-cone design: reduced-resistance penetration. The double-cone profile of the mining excavator bucket reduces the resistance to penetration into the material, allowing faster filling at the same hydraulic consumption. Compared with the straight profile of standard buckets, the cone design concentrates the penetration force on a smaller surface at entry into the material, increasing efficiency by up to 10% in granular materials and friable rock.
“the double-conical profile of the mining excavator bucket reduces resistance to penetration into the material, allowing faster filling at the same hydraulic consumption.”
• Increased capacity of +10% through a lightweight structure: the Monde mining excavator bucket uses high-strength steels that allow the wall thickness to be reduced without compromising structural strength. The mass saved is redirected into useful loading capacity: the result is a mining excavator bucket with +10% volume compared with an equivalent-weight bucket made of standard structural steel.
• Premium MTG and SBIC teeth: the Monde mining excavator bucket is equipped with MTG (Metalogenia) or SBIC tooth systems, world-reference manufacturers of excavator teeth. These systems ensure optimal penetration into hard rock, resistance to abrasive wear and rapid replacement of worn teeth without welding.
• Additional plates at the bucket base: the zones of maximum wear of the mining excavator bucket (the bottom and the lower sides) are reinforced with additional steel plates, doubling or tripling the wall thickness in the zones in direct contact with abrasive rock and ore.
• Full coverage 6–90 tonnes: the Monde mining excavator bucket is available for all classes of excavators used in mining and quarrying, from 6-tonne machines for small-capacity surface operations, up to 90-tonne excavators in large surface mines.
• 60-month UZINEX warranty: extended coverage with spare parts, teeth and wear plates in stock at Iași, and guaranteed nationwide technical support within 24–48 hours.
Technical specifications: Monde mining excavator bucket
| Parameter | Value |
|---|---|
| Available types | Standard, Heavy Duty, Rock Bucket, Multi-purpose, Clamshell |
| Capacity | 0,25 m³–20 m³ |
| Compatible excavators | 6 – 90 tonnes |
| Structural materials | Q345B, Q460, WH60A |
| Anti-wear materials | NM360, NM450, Hardox 400, Hardox 500 |
| Tooth systems | MTG, SBIC (premium) |
| Design | Double-cone: reduced penetration resistance |
| Capacity gain | +10% over equivalent standard-steel buckets |
| Reinforcement | Additional plates at the base and lower sides |
| Main applications | Mining, quarries, industrial demolition, heavy infrastructure |
The exact type, capacity and materials are selected according to the type of rock or ore, the excavator tonnage and the intensity of use. UZINEX engineers size the right mining excavator bucket for your application. Free technical consultancy available . The 5 types of Monde mining excavator bucket
Application dedicated to flows with constant quality requirements.
Equipment configured for medium and large volumes.
Quick adjustment between different orders.
The Standard mining excavator bucket is the base variant of the Monde range, designed for mixed materials of medium hardness: compact soils with gravel, friable rock and demolition materials with variable iron content. The Q345B and Q460 structure with standard MTG teeth makes it suitable for general excavation operations in quarries and surface mines where the material is not extremely abrasive.
The Heavy Duty mining excavator bucket is the additionally reinforced variant compared with the Standard, intended for excavators working continuously in hard rock and high-strength ores. The wall thickness, the base reinforcements and the material selection (NM450, Hardox 500 in the critical zones) are superior to the Standard model, justifying its choice on excavation faces with compact rock.
The Rock Bucket mining excavator bucket is the variant specialized exclusively for excavating in hard abrasive rock: granite, basalt, quartzite, dense limestone. The profile, the distribution of anti-wear materials and the tooth system are optimized to maximize service life in direct contact with hard rock, at the cost of a slightly reduced useful volume compared with the HD.
The Multi-purpose mining excavator bucket combines excavation capabilities with the ability to handle and sort materials, through a design that allows alternating use across several applications on the same site or mining operation.
The Clamshell mining excavator bucket (bivalve) is intended for dredging and extracting loose-type materials (sand, underwater gravel, granular ore) from basins, settling ponds and alluvial operations, where the standard excavation geometry does not allow efficient pickup of the material. Applications for the Monde mining excavator bucket
Surface mining operations for coal, bauxite, iron ore, copper and other metallic and non-metallic resources use the mining excavator bucket as the main extraction tool. The volumes of material excavated daily in these operations (thousands to tens of thousands of tonnes) call for a mining excavator bucket with maximum resistance to abrasive wear and the largest possible volume capacity compatible with the excavator class.
Stone quarries for granite, basalt, limestone and marble represent the classic application for the Rock Bucket mining excavator bucket. Rock extracted by blasting or drilling is fragmented into blocks and loaded into high-tonnage vehicles; the mining excavator bucket works in extremely abrasive material, with sharp edges and a hardness of 200–300 MPa, where a standard construction bucket wears out within a few weeks.
Heavy infrastructure works (deep earthworks, underpasses, tunnels in terrain with shallow rock) use the Heavy Duty mining excavator bucket on medium- and heavy-class excavators when the rock layer requires direct excavation without pre-fragmentation. The double-cone profile of the mining excavator bucket allows efficient penetration into rock with fracture planes without stalling the excavator.
Industrial demolition of massive reinforced concrete structures, deep foundations and high-strength mat slabs are applications where the Heavy Duty or Rock Bucket mining excavator bucket partially replaces the hydraulic breaker for the rapid removal of fragmented concrete with high rebar content. Frequently asked questions about the mining excavator bucket
How do I choose between Standard, Heavy Duty and Rock Bucket?
The choice of mining excavator bucket type depends on the hardness and abrasiveness of the material. Standard is suitable for medium-hardness materials (compact soils, friable rock below 80 MPa). Heavy Duty is the choice for compact hard rock (80–150 MPa) used continuously. Rock Bucket is the maximum variant for extremely hard and abrasive rock (150–300 MPa) where the service life of the anti-wear steel is the determining factor. UZINEX engineers recommend the correct type based on the technical data of the specific deposit or rock. Are the MTG and SBIC teeth replaceable in the field?
Yes, the MTG and SBIC systems of the mining excavator bucket are designed for rapid field replacement, without welding, using standard wrenches or system-specific adapters. Worn teeth are extracted and replaced within a few minutes per tooth, without dismounting the bucket from the excavator. UZINEX keeps replacement MTG and SBIC teeth in stock at Iași for immediate delivery. Can the mining excavator bucket also be used in civil construction?
Yes, the Standard and Multi-purpose mining excavator bucket are frequently used on civil construction sites with a rock layer or extremely compact terrain, where a standard construction bucket does not penetrate efficiently. The reinforcements and premium materials of the mining excavator bucket make it more durable than a construction bucket in these conditions, justifying the additional investment over the standard variant. Is the mining excavator bucket eligible for SEAP/SICAP public procurement?
Yes. UZINEX is a member of the Enterprise Europe Network and supplies industrial attachments for projects funded by EU funds and public procurement. Complete technical documentation is provided on request. Leasing options are available on the UZINEX credit and leasing page . Why UZINEX for the mining excavator bucket
The mining excavator bucket is a capital asset with a direct impact on the cost per extracted tonne and on the productivity of the work face. Incorrect sizing (wrong type, insufficiently hard material, unsuitable teeth) is quickly paid for through premature wear and unplanned stops.
• 60-month warranty: extended coverage for the Monde mining excavator bucket under continuous mining production.
• Specialized technical sizing. UZINEX engineers select the type, capacity and materials of the mining excavator bucket based on the technical data of the application: rock type, hardness, abrasiveness, excavator tonnage, daily working hours.
• Transport and installation included: delivery to destination, mounting on the excavator and operator training included in the price of the mining excavator bucket.
• MTG/SBIC teeth and wear plates in stock at Iași: the fastest-turnover parts available immediately, with no waiting times that stop mining production.
• Nationwide technical support within 24–48 hours: a network of technicians with national coverage and a guaranteed response time.
• Eligible for EU funds and public procurement: member of the Chamber of Commerce and Industry and the Enterprise Europe Network, with complete documentation for all procurement procedures.
The Monde mining excavator bucket available through UZINEX in 5 types for 6–90 tonnes is the choice of operators in mining, quarries and industrial demolition who require maximum resistance to abrasive wear, with Hardox 400/500, NM450, MTG/SBIC teeth and a 60-month warranty.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
