Spot repair system with UV-cured patch, CA1–CA5 packers for DN200–600, two-section LED lamp, 60 m cable reel, control unit.
| Type | UV spot repair system |
| Pipe diameters | DN200–600 |
| Packers | CA1, CA2, CA3, CA4 and CA5, for DN200, 300, 400, 500 and 600 |
| Repair time | about 7–8 minutes per defect |
| UV light trains | LED, two sections |
| Cable | reel with 60 m |
| Control | main controller, real-time video |
The UZX-X120-ZD is a spot repair system for pipes below DN600, using a UV-cured liner patch. It fixes cracks, offset joints, infiltration and root intrusion without rehabilitating the whole run.
The prefabricated patch is wrapped around a packer sized to the pipe, CA1 … CA5 for DN200, 300, 400, 500 and 600, taken to the defect and pressed onto the wall. The LED lamp inside the packer cures it in a few minutes, and the video shows the whole process in real time.
| Parameter | Value |
|---|---|
| Type | UV spot repair system |
| Pipe diameters | DN200–600 |
| Packers | CA1, CA2, CA3, CA4 and CA5, for DN200, 300, 400, 500 and 600 |
| Repair time | about 7–8 minutes per defect |
| UV light trains | LED, two sections |
| Cable | reel with 60 m |
| Control | main controller, real-time video |
A resin-impregnated liner patch is wrapped around a packer, which is taken to the defect by robot or rods. The packer inflates and presses the patch onto the wall, and the UV LED lamp inside cures it in a few minutes. The camera shows the position and the process throughout, so the repair lands exactly on the crack, root intrusion or offset joint.
The prefabricated patch needs no material production on site.
A defect is repaired in minutes, so dozens of defects a day.
Cheaper than rehabilitating the whole run when defects are few.
It is used for repairing cracks, offset joints, infiltration and roots in DN200–600 pipes after CCTV inspection, without replacing the run and without digging.
The first criterion is the type of defect. For whole sections choose UV liner relining: the UZX-X120-UV-MINI for DN150–500, the UZX-X120-UVG for DN200–2000 and the UZX-X120-UV-SUPER for DN200–1600 at high output. For isolated defects below DN600 choose the UZX-X120-ZD spot repair. The second criterion is the vehicle: a van for the UZX-X120-UV-MINI, a truck for the large systems. The UZX-ZY-86 liner is ordered to the diameter and wall thickness calculated for each section.
The price depends on the model and configuration: cable length, wheels and modules (lidar, sonar, sonde), software and accessories. Send us the diameters and lengths of the pipes you inspect or rehabilitate, and a Uzinex engineer will quote the right configuration. Delivery, commissioning and operator training are included in Romania.
• Delivery and commissioning included, with on-site operator training.
• 60-month warranty, standard across the whole catalogue.
• Service with nationwide coverage in Romania, on-site visit within 24 hours.
• Spare parts and accessories in stock: wheels, cables, lamps, packers.
• Technical documentation for EU-funded projects, PNRR and public tenders (SEAP/SICAP).
• Configuration on request: cable length, measuring modules and reporting software to suit your network.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
