High duty cycle, reduced spatter and high deposition
| Machine type | MIG/MAG source with waveform control |
| Processes | MIG/MAG (GMAW) |
| Output current | 350 / 400 / 500 / 630 A (model dependent) |
| Power supply | Three-phase 380 V ±10%, 50/60 Hz |
| Duty cycle | High, for long continuous welding |
| Arc functions | Creep start, ball removing, waveform control |
| Adjustment | Continuous for current and voltage |
| Wire | Solid and flux-cored |
| Display | Digital, accurate parameter preset |
| Deposition | High rate, reduced distortion |
| Typical applications | Structures, shipbuilding, pipeline, heavy machinery |
| Certification | CE |
| Material | Note |
| Carbon steel | High deposition, solid bead |
| Stainless steel | Clean appearance with right wire and gas |
| Solid wire | MIG/MAG with shielding gas |
| Flux-cored wire | Maximum deposition on thick plate |
The MECVORA industrial MAG welder is built for heavy-duty steel production, with a high duty cycle, little spatter and high deposition. It comes in 350, 400, 500 and 630 A versions on 380 V three-phase, as a MIG MAG welder with waveform control and stepless current and voltage adjustment.
The MECVORA industrial MAG welder costs from 1,837 EUR excluding VAT. The price depends on the maximum welding current. Price updated in November 2026, based on UZINEX quotations from the last 18 months.
In a production flow, this MIG MAG welder replaces machines that overheat and stop often, consolidating productivity across long steel-welding runs. It fits naturally into any metal-fabrication, shipbuilding or structural shop, and completes the range alongside the MIG welding machine in the same family.
• High duty cycle, a MIG MAG welder built for heavy duty sustains continuous welding for long periods, ideal for large runs and massive structures where stopping to cool down wastes money.
• Low spatter, advanced waveform control technology minimizes spatter, which means less cleaning, lower material and time cost, and a tidier workspace.
• High deposition, low distortion, solid beads with a high deposition rate and reduced workpiece distortion, exactly what steel-structure fabrication demands.
• Slow wire creep start, the wire advances slowly at initiation, which eases arc striking and gives a clean start of the bead.
• Ball-removing function, ensures a stable arc stop and reliable re-ignition, with no ball at the wire tip.
• Continuous adjustment, current and voltage adjust continuously over a wide range, for a fine arc on every material thickness, from sheet to heavy section.
• Solid and flux-cored wire, compatible with both solid and flux-cored wire, for flexibility depending on the job, the position and the shielding gas.
• One supplier for the whole flow, installation, training and service from the same team, with no juggling between multiple partners.
| Parameter | Value |
|---|---|
| Machine type | MIG/MAG source with waveform control |
| Processes | MIG/MAG (GMAW) |
| Output current | 350 / 400 / 500 / 630 A (model dependent) |
| Power supply | Three-phase 380 V ±10%, 50/60 Hz |
| Duty cycle | High, for long continuous welding |
| Arc functions | Creep start, ball removing, waveform control |
| Adjustment | Continuous for current and voltage |
| Wire | Solid and flux-cored |
| Display | Digital, accurate parameter preset |
| Deposition | High rate, reduced distortion |
| Typical applications | Structures, shipbuilding, pipeline, heavy machinery |
| Certification | CE |
A MIG MAG welder of this type serves metal fabrication, the automotive industry, shipyards, steel-structure fabrication, pipelines and heavy machinery. Shops working with steel gain high productivity thanks to the high duty cycle and maintain consistent quality across long runs.
The solution suits both varied production and high-volume series in an industrial setting. The machine complies with the applicable requirements for CE-marked industrial equipment, in line with the EU Machinery Directive 2006/42/EC. For an intelligent platform with ultra-low spatter, see the industrial MIG welder in the same family.
On thick structures and demanding joints, a high-deposition MIG MAG welder speeds up production and reduces the number of passes. The high duty cycle means the machine can weld without long cooling stops, a direct advantage on site and in shops with continuous production.
Heavy-industry service providers use a MIG MAG welder for high volumes of steel welding, with low spatter and a clean bead start thanks to the slow creep. Continuous current and voltage adjustment gives fine control on every thickness, from medium plate to thick profiles. On a return-on-investment basis, high deposition and low downtime lower the cost per meter of bead, so a busy machine pays for itself fast.
For a fabricator running steel day in and day out, the value is simple: a machine that stays welding instead of cooling down keeps the whole shop moving. Fewer stops mean the welder spends time laying beads rather than waiting, and on fixed-price structural jobs that throughput difference often decides whether the contract is profitable.
The system welds mainly steels, depending on wire and shielding gas. Welding behaviour depends on parameters and material; the values below are indicative and confirmed in the personalized quotation.
On carbon steel, high deposition and arc control give solid beads with reduced distortion, and on stainless steel a clean appearance is achieved with the right wire and gas. Flux-cored wire further increases deposition on thick plate, for maximum productivity even in difficult welding positions. This makes the machine a workhorse for structural steel, where long fillet welds and heavy sections are the daily reality.
| Material | Note |
|---|---|
| Carbon steel | High deposition, solid bead |
| Stainless steel | Clean appearance with right wire and gas |
| Solid wire | MIG/MAG with shielding gas |
| Flux-cored wire | Maximum deposition on thick plate |
The workflow on a MIG MAG welder is simple and repeatable, from setup to finished weld:
1. The operator presets current and voltage on the digital display for the chosen material and wire.
2. Continuous adjustment allows fine tuning of the arc for the exact workpiece thickness.
3. At initiation, the slow wire start eases striking and gives a clean beginning.
4. The welder runs the bead, and waveform control keeps spatter low.
5. At the end, the ball-removing function ensures a clean stop and reliable re-ignition.
6. The high duty cycle allows welding to continue without long cooling stops.
Because settings are simple and stable, an operator quickly reaches consistent results, and productivity stays high across long runs, a real advantage for shops with high volumes of steel welding. This also makes planning predictable and keeps the cost per meter of bead under control from one order to the next. For a shop quoting structural work by the meter, that predictability is as valuable as the raw welding speed.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.