Digital inverter with pulse control and synergic database, minimal spatter
| Machine type | Digital inverter (32-bit microprocessor) |
| Processes | Pulse MIG/MAG, standard MIG/MAG, TIG (lift), MMA |
| Output current | up to 350 A / up to 500 A (model dependent) |
| Power supply | Three-phase 380 V, 50/60 Hz |
| Pulse control | High-precision waveform management |
| Synergic program | Expert synergic database |
| Parameter memories | 20 slots |
| Panel | Digital, metric/imperial switchable |
| Wire | Solid and flux-cored, Ø 0.8 – 1.6 mm (per configuration) |
| Cooling | Water, on-demand |
| Protection rating | IP23 |
| Certification | CE / UKCA |
| Material | Note |
| Carbon steel | Clean bead, strong penetration |
| Stainless steel | Uniform appearance, controlled heat input |
| Aluminium | Pulse recommended, reduced distortion |
| Flux-cored wire | High deposition, ideal for thick plate |
The MECVORA pulsed MIG welder is a digital inverter with a 32-bit microprocessor, in 350 and 500 A versions on 380 V three-phase. It welds pulsed and standard MIG/MAG, lift TIG and MMA, and the synergic database and waveform control keep the arc stable with little spatter on steel, stainless steel and aluminium.
In a production flow, this pulse MIG welder replaces laborious manual settings and spatter-related rework, consolidating quality into one machine you can rely on through long shifts. It fits naturally into any metal-fabrication, structural or repair shop, and completes the range alongside the industrial MIG welder in the same family.
• One pulse, one droplet, high-precision waveform management transfers metal in a controlled way, so the pulse MIG welder stays stable, with uniform droplets and a consistent arc.
• Low spatter, digital arc control minimizes spatter, which means less post-weld cleaning and lower material and time cost.
• Strong penetration, the consistent arc ensures solid fusion and a defect-free bead, even on thicker material or difficult joints that would challenge a basic machine.
• Expert synergic database, optimal parameters for most material, wire and gas combinations are already in memory, so setup is fast and accessible to any operator.
• 20 parameter memories, you can save settings for recurring jobs and recall them instantly, for identical results from one order to the next.
• Multi-process, beyond pulse MIG/MAG, the machine also covers standard MIG/MAG, TIG and MMA, so a single unit handles several types of work.
• Grid adaptability and on-demand cooling, it runs stably even with fluctuating supply voltage, common on busy sites, and on-demand water cooling extends torch working time during long runs.
• One supplier for the whole flow, installation, training and service from the same team, with no juggling between multiple partners.
| Parameter | Value |
|---|---|
| Machine type | Digital inverter (32-bit microprocessor) |
| Processes | Pulse MIG/MAG, standard MIG/MAG, TIG (lift), MMA |
| Output current | up to 350 A / up to 500 A (model dependent) |
| Power supply | Three-phase 380 V, 50/60 Hz |
| Pulse control | High-precision waveform management |
| Synergic program | Expert synergic database |
| Parameter memories | 20 slots |
| Panel | Digital, metric/imperial switchable |
| Wire | Solid and flux-cored, Ø 0.8 – 1.6 mm (per configuration) |
| Cooling | Water, on-demand |
| Protection rating | IP23 |
| Certification | CE / UKCA |
A pulse MIG welder serves metal fabrication, welded structures, the automotive and transport industry, repair and industrial maintenance. Shops that invest in a pulse inverter get superior-looking welds with minimal spatter and cut finishing time on every part.
The solution suits both varied one-off production and high-volume series. The machine complies with the applicable requirements for CE-marked industrial equipment, in line with the EU Machinery Directive 2006/42/EC. For a rugged MIG machine dedicated to industrial production, see the MIG welding machine in the same family.
On aluminium and stainless steel, the pulse MIG welder controls heat input and reduces distortion, which makes it ideal for thin sheet and for visible, high-quality welds. Welders get a uniform bead appearance, and spatter control means less grinding and a finished part sooner.
Welding-service providers use a pulse MIG welder to cover varied jobs, from thin sheet to thick structures, with a single multi-process unit. The synergic database and parameter memories keep setup time low even on mixed batches, with different materials in the same working day. On a return-on-investment basis, reduced spatter and grinding lower the cost per part, so a busy pulse MIG welder pays for itself fast.
From a productivity standpoint, a pulsed inverter earns back its cost quickly on medium and high volumes: cleaner beads cut grinding time, controlled heat reduces distortion scrap, and the synergic setup lets a smaller team keep pace with demand without lengthy training on every new joint.
The system welds a wide range of metals, depending on wire and shielding gas. Welding behaviour depends on parameters and material; the values below are indicative and confirmed in the personalized quotation.
On carbon steel and stainless, the pulsed arc gives a clean bead and controlled penetration, while on aluminium it reduces the risk of burn-through on thin sheet. Synergic mode adjusts parameters automatically, so moving from one material to another is simple and fast, with no lengthy manual setup between jobs. This flexibility means one machine can cover a mixed order book instead of forcing you into a single material niche.
| Material | Note |
|---|---|
| Carbon steel | Clean bead, strong penetration |
| Stainless steel | Uniform appearance, controlled heat input |
| Aluminium | Pulse recommended, reduced distortion |
| Flux-cored wire | High deposition, ideal for thick plate |
The workflow on a pulse MIG welder is simple and repeatable, from setup to finished weld:
1. The operator selects material, wire diameter and gas from the synergic database.
2. The machine automatically proposes optimized current, voltage and pulse parameters.
3. If needed, the operator fine-tunes the parameters and saves the setting to a memory.
4. The welder runs the bead, and pulse control keeps the arc stable and spatter minimal.
5. On-demand cooling protects the torch during long, intensive jobs.
6. The finished part comes out with a clean bead, with minimal finishing required.
Because parameters are saved by job, repeating a recurring order is instant, and a less experienced operator quickly reaches consistent results, a real advantage for shops with staff turnover. This also makes planning predictable and keeps the cost per weld under control from one order to the next. For a shop bidding on fixed-price jobs, that predictability is often worth as much as the raw welding speed.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.