UZX-ZX-1625V: CNC knife cutting machine, table 1600×2500 mm, dual tool holder, speed 1200 mm/s, accuracy ±0,1 mm, materials 0,1–100 mm, vacuum 9 kW.
| Machine type | CNC knife cutting machine, fixed table |
| Work area | 1600 × 2500 mm (L × W) |
| Rated power | 11 kW |
| Maximum cutting speed | 1200 mm/s |
| Rapid travel speed | 1500 mm/s |
| Cutting thickness | 0,1 – 100 mm (depending on material and configuration) |
| Cutting accuracy | ±0,1 mm |
| Drive system | Servo motors, linear guides, rack and pinion |
| Material clamping | Vacuum adsorption system |
| Vacuum pump | 9 kW, flow rate 1050 m³/h, max. pressure -36 kPa |
| Accepted formats | DXF, PLT and other standard CAD/CAM formats |
| Transmission interface | Ethernet |
| Operating mode | Online / Offline, 24/7 continuous cutting |
| LCD control panel | 7 inch, resolution 800×480, 10,5–28 VDC |
| Safety devices | Infrared sensors, 4 emergency stop buttons, intelligent anti-collision |
| Power supply | AC 110V / 220V / 380V, 50/60 Hz, single/three-phase |
| Machine dimensions | Approx. 3350 × 2350 × 1275 mm |
| Weight | 1100 kg |
The UZX-ZX-1625V is a fixed-table CNC knife cutting machine, designed for the precision processing of soft and semi-rigid non-metallic materials: corrugated cardboard, solid board, EVA and polyester foam, coroplast (corrugated plastic), honeycomb boards and polystyrene. The equipment is intended for packaging factories, POS display manufacturers, advertising workshops and rapid prototyping centers that need clean cutting, with no burning, at industrial speeds.
Unlike laser cutting, this CNC knife cutting machine produces no heat, smoke or burnt edges: the material remains chemically and aesthetically intact. The dual tool holder system allows two different tools to be mounted simultaneously, eliminating manual tool changes between operations and increasing productivity on long shifts or continuous 24/7 production.
• Dual tool holder: two tools active simultaneously. The UZX-ZX-1625V CNC knife cutting machine allows two different heads to be mounted (e.g.: oscillating tool + V-cut tool) active in the same cycle, with no stops for tool changes.
• Cutting accuracy ±0,1 mm, ensured by industrial servo motors and high-quality linear guides with rack and pinion, for exact repeatability on large runs.
• Cutting speed up to 1200 mm/s: 3–5 times faster than manual cutting or classic plotters, with a rapid travel of 1500 mm/s.
• Compatible with materials from 0,1 mm to 100 mm thick: the included raised gantry allows the processing of thick boards of EVA foam, honeycomb or polystyrene without additional modifications.
• Automatic nesting software included: optimizes the placement of patterns on the material sheet, reducing waste and maximizing yield per board.
• 24/7 continuous operation: the CNC knife cutting machine works online and offline, with DXF and PLT support, and can be integrated into automated production flows.
• Aircraft-grade aluminium alloy platform: a series 6 alloy work table with a series 7 aviation aluminium honeycomb support, for long-term mechanical stability without deformation.
• Complete industrial safety: infrared sensors, 4 emergency stop buttons and an intelligent anti-collision device, in line with industrial safety standards.
| Parameter | Value |
|---|---|
| Model | UZX-ZX-1625V |
| Machine type | CNC knife cutting machine, fixed table |
| Work area | 1600 × 2500 mm (L × W) |
| Rated power | 11 kW |
| Maximum cutting speed | 1200 mm/s |
| Rapid travel speed | 1500 mm/s |
| Cutting thickness | 0,1 – 100 mm (depending on material and configuration) |
| Cutting accuracy | ±0,1 mm |
| Drive system | Servo motors, linear guides, rack and pinion |
| Material clamping | Vacuum adsorption system |
| Vacuum pump | 9 kW, flow rate 1050 m³/h, max. pressure -36 kPa |
| Accepted formats | DXF, PLT and other standard CAD/CAM formats |
| Transmission interface | Ethernet |
| Operating mode | Online / Offline, 24/7 continuous cutting |
| LCD control panel | 7 inch, resolution 800×480, 10,5–28 VDC |
| Safety devices | Infrared sensors, 4 emergency stop buttons, intelligent anti-collision |
| Power supply | AC 110V / 220V / 380V, 50/60 Hz, single/three-phase |
| Machine dimensions | Approx. 3350 × 2350 × 1275 mm |
| Weight | 1100 kg |
The UZX-ZX-1625V CNC knife cutting machine processes single wall and double wall corrugated cardboard, solid board (grey, ivory, duplex) and honeycomb board. The available operations include cutting, creasing and V-cutting for fold lines, fully covering the needs of prototyping and custom packaging production.
The servo tool with tungsten steel blades is optimized for EVA foam and similar materials with thicknesses of up to 100 mm. The cutting is done without heat, without melting and without edge deformation, essential for protective inserts in industrial packaging, prototypes and display stands.
The pneumatic tool and the V-cut tool are configured specifically for coroplast and honeycomb boards, producing clean cuts and precise fold grooves without cracking the material. This CNC knife cutting machine is one of the few solutions able to process cardboard and coroplast simultaneously without changing the platform.
The dual tool holder configuration allows adaptation for flexible PVC, plastic films, lightweight composite materials and other non-metallic materials with thicknesses between 0,1 mm and 100 mm, depending on the installed tools.
The UZX-ZX-1625V CNC knife cutting machine is delivered with a complete set of industrial tools, at no additional cost. Oscillating tool (1 pc. + 20 blades) for precision cutting through oscillating motion on flexible and semi-rigid materials. Pneumatic tool (1 pc. + 20 blades) for corrugated cardboard and coroplast. Creasing tool for producing fold lines. V-cut tool (1 pc. + 10 blades) for V-grooving on coroplast, corrugated cardboard and honeycomb. Servo tool (1 pc. + 10 tungsten steel blades) dedicated to EVA foam and similar materials. 100 mm raised gantry for processing thick materials. Laser pointer for precise visual guidance when positioning the material. Industrial computer + cabinet fully included in the standard delivery.
1. Design: the design file (DXF or PLT) is loaded into the nesting or V-cut software. The CNC knife cutting machine accepts files from any CAD/CAM application that exports to these standard formats.
2. Automatic nesting: the software automatically arranges the patterns on the surface of the material sheet to maximize utilization and minimize material waste.
3. Transmission to the machine: the finalized project is sent to the CNC knife cutting machine via the Ethernet interface within seconds.
4. Work table preparation: the material is placed on the 1600×2500 mm table and the vacuum system is activated for precise clamping without movement during processing.
5. Automatic cutting. The CNC knife cutting machine automatically performs the programmed operations: cutting, creasing, V-grooving, EVA cutting, according to the paths in the file.
6. Removing the parts: the finished parts are removed from the work table, with clean edges, with no burning and no deformation, ready for assembly or shipping.
• Free technical consultancy before purchase: UZINEX evaluates the processed materials, the production volume and the typology of the patterns to confirm that the UZX-ZX-1625V CNC knife cutting machine is the optimal configuration for the customer's workflow.
• Transport, installation and commissioning included free of charge: the equipment is delivered, installed and started up at the customer's location by specialized UZINEX technicians, including operator training on the actual equipment.
• Extended 60-month warranty: one of the longest warranties available in Romania for a CNC knife cutting machine in this category, with technical support included throughout the warranty period.
• National technical support in under 24 hours in Romania (24–72 hours in other countries): physical intervention or video assistance in under 24 hours from the report, with a dedicated telephone line for UZINEX customers available 24/7.
• Intelligent AI manual included: usage, maintenance and troubleshooting documentation with AI assistance, able to instantly resolve over 96% of common technical requests without human intervention.
• Eligibility for EU funds: UZINEX provides the documentation required for purchases through EU funding and supports the tender process for public and private sector customers.
The UZX-ZX-1625V is the CNC knife cutting machine suited to companies that process cardboard, foam, coroplast or similar materials and need industrial precision, high versatility and continuous operation, with no quality compromises and without the additional costs of thermal cutting.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.