Automatic all-in-one machine for 3D letters in steel and aluminium up to 200 mm
| Applicable materials | Stainless steel, iron, copper, flat aluminium, aluminium profiles |
| Coil width / letter depth | 20–200 mm |
| Material thickness | up to 2.0 mm |
| Slotting system | dual, knife and saw blade |
| Feeding | dual, servo-driven, ball screw and linear guide |
| Letter types | trimless, trim-cap, reverse, halo-lit |
| Drive / sensors | Delta servo motors, Omron sensors |
| Footprint | 5,25′ × 2,92′ |
| Lead time | 7–10 days |
| Certification | CE |
| Material | Thickness / notes |
| Stainless steel | up to 2.0 mm |
| Flat aluminium | up to 2.0 mm |
| Copper | for decorative accents |
| Aluminium profiles | for channelume letters |
This MECVORA channel letter bending machine produces every type of 3D sign letter fully automatically: trimless, trim-cap, reverse and halo-lit. It bends stainless steel, aluminium, copper or aluminium profile strip 20–200 mm wide and up to 2 mm thick, with dual notching by knife and saw blade and a dual servo feed.
Positioned at the premium end, the machine replaces slow hand bending and reliance on subcontractors with a fast, precise, automated workflow. It is the natural choice for medium and growing signage businesses that take on varied orders and need one investment covering both small letters and large façade letters.
• Fully automated workflow, the channel letter bender handles feeding, notching and bending in a single software-driven cycle, so one operator turns out dozens of letters a day instead of the handful possible by hand.
• Repeatable precision, the servo-and-encoder system holds the same geometry on every letter, removing the small variations of hand bending and delivering clean, seam-free returns.
• Direct labour savings, automation cuts production time and reliance on highly skilled staff, and the payback shows up quickly in shops with a steady order flow.
• Intuitive software, artwork imports straight from vector files (DXF), and the parameters for each material and thickness are saved and recalled for a repeat job in a couple of clicks.
• Robust build, a rigid frame and quality drive components keep precision at high volumes, while software adjustments shorten the changeover time from one letter to the next.
• Every 3D letter type, telescopic bending arms form trimless, reverse, halo-lit and trim-cap letters with sharp corners, without complicated tooling changes.
• Dual slotting system, a knife for hard materials (steel, thicker aluminium) and a saw blade for aluminium, switchable from the software to match the coil.
• Coil pre-straightening, the coil is straightened before processing so it will not jam or deform, a detail that saves both time and material.
| Parameter | Value |
|---|---|
| Applicable materials | Stainless steel, iron, copper, flat aluminium, aluminium profiles |
| Coil width / letter depth | 20–200 mm |
| Material thickness | up to 2.0 mm |
| Slotting system | dual, knife and saw blade |
| Feeding | dual, servo-driven, ball screw and linear guide |
| Letter types | trimless, trim-cap, reverse, halo-lit |
| Drive / sensors | Delta servo motors, Omron sensors |
| Footprint | 5,25′ × 2,92′ |
| Lead time | 7–10 days |
| Certification | CE |
The precision of a channel letter is decided in two steps: exact notching at the bend points and tight control of strip feeding. The machine combines a precise notching system with servo-controlled bending arms, so every corner comes out at the programmed angle, with no play and no manual correction.
The encoder tracks the real strip length throughout and the software compensates automatically, which is why this channel letter bender stays a machine you can rely on for long runs with identical geometry. The result shows in clean edges, discreet seams and letters ready to be lit straight off the machine.
The channel letter bender serves advertising firms, illuminated-sign makers and signage shops producing storefront signs, corporate logos and façade letters. Because it works steel, aluminium and copper alike, a single machine covers both decorative indoor letters and rugged outdoor ones.
For shops that take varied orders, versatility is decisive: the same machine makes small window letters and large letters for totems or mall façades, without splitting the job across several tools. Producers working with retail chains or ad agencies gain predictability, every letter comes out identical, batch after batch.
In series production, the repeatable workflow shortens the path from artwork to installation: recipes saved per material and thickness let you rerun a recurring order quickly, and the consistent result cuts scrap and manual touch-ups.
The machine meets the requirements applicable to industrial equipment placed on the EU market, in line with the Machinery Directive 2006/42/EC. See also our full range of channel letter equipment for other configurations.
The machine processes most materials used in illuminated signage. The thicknesses below are indicative and confirmed in your personalised quote, depending on the letter type:
| Material | Thickness / notes |
|---|---|
| Stainless steel | up to 2.0 mm |
| Flat aluminium | up to 2.0 mm |
| Copper | for decorative accents |
| Aluminium profiles | for channelume letters |
The workflow on a MECVORA channel letter bender is simple and repeatable, from file to finished letter:
1. The operator imports the vector file (DXF) with the outline of the letter or logo into the software.
2. They pick the material and thickness from the library; the system automatically sets the notching and bending parameters for steel, aluminium, copper and profiles.
3. The metal coil is loaded into the feeding system, which straightens and advances it without slipping.
4. The notching head cuts precisely at the bend points, and the servo-controlled arms form the letter profile.
5. The finished letter is ejected, ready for assembly, LED lighting and installation, with no extra manual finishing.
The digital workflow turns the machine from a simple bender into a predictable production tool. The software takes the letter outline straight from the vector file and calculates the notching points automatically, with no manual tracing and no interpretation errors.
Parameters are saved per material and thickness, in a recipe library you reuse whenever an order comes back. So a channel letter bender set up correctly once then produces identical letters, even if the operator changes between shifts.
Efficient nesting of letters on the strip reduces material waste, and switching from one project to the next drops to a few clicks. The result is a shop that responds quickly to urgent orders and meets its deadlines without improvisation.
A channel letter bender is a long-term investment, and UZINEX treats it as one. We arrange transport of the machine across Europe together with the required technical documentation, and we handle commissioning at your premises so the production line starts without delays or improvisation.
After installation we train your operators directly on your own machine, from importing DXF files to fine-tuning for each material and thickness. We stay available for service, spare parts, consumables and production-recipe optimisation throughout the machine's working life.
Outsourcing channel letters means longer lead times, margins shared with subcontractors and dependence on their availability. Bringing production in-house, onto a channel letter bender, changes the equation: you control the deadline, the quality and the cost of every order, and the profit stays entirely with you.
For firms with a steady order flow, such a machine pays back quickly through the number of letters produced in-house, plus the new orders you can take on without depending on an outside supplier. The UZINEX team helps you estimate the right volume and configuration for your case.
A production machine has to be easy to maintain to stay productive. Routine tasks, checking the notching knives, cleaning the feeding system and lubricating the guides, are simple and quick, and wear parts are replaced without complex intervention.
UZINEX supplies spare parts, consumables and technical support throughout the machine's life, so a well-maintained channel letter bender runs for years with the same precision. A simple maintenance plan reduces unplanned downtime and protects the investment.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.