200 m/min positioning, ±0.03 mm accuracy, fully enclosed cabin
| Laser source power | 3,000 – 30,000 W (by configuration) |
| Working area | 3,000 × 1,500 mm (up to 6,000 × 2,500 mm) |
| Positioning speed | 200 m/min |
| Maximum acceleration | up to 4 G |
| Positioning accuracy | ±0.03 mm |
| Repeatability | ±0.02 mm |
| Source type | Premium fiber (Raycus / IPG) |
| Cutting head | Autofocus with automatic Z-axis control |
| Control system | Dedicated CNC with automatic nesting |
| Protection | Fully enclosed cabin |
| Automatic nozzle changer | Yes |
| Certification | CE |
| Material | Indicative thickness (6 kW) |
| Carbon steel | up to ~25 mm |
| Stainless steel | up to ~12 mm |
| Aluminium | up to ~10 mm |
| Brass / copper | up to ~8 mm |
If your workshop needs a fast, accurate and fully automated fiber laser cutting machine, this professional MECVORA system delivers industrial-grade productivity on a single unit. Built with premium components, a high-power fiber source, an autofocus cutting head and a dedicated CNC controller with automatic nesting, it reaches instant positioning up to 200 m/min and keeps cut quality consistent, part after part.
On the shop floor, this fiber laser cutting machine replaces punching, plasma cutting and outsourced services, consolidating your entire sheet-processing workflow into one workstation. It fits naturally into any shop that runs carbon steel, stainless steel or aluminium, from one-off parts to high-volume series, explore the full range of sheet metal cutting machines we offer.
• 4G positioning at 200 m/min, the cutting head reaches the start point instantly and a 1 m idle move takes under 500 ms, so dead time between parts drops dramatically.
• Full automation, the automatic nozzle changer and one-second edge finding remove manual steps; the operator starts the cutting cycle with a single click.
• Consistent ±0.03 mm accuracy, repeatability holds even at the ten-thousandth part, eliminating secondary operations on precision components.
• Superior edge quality, nitrogen cutting on stainless steel and aluminium leaves a clean, oxide-free edge with no burrs, ready for welding or coating.
• Lower running costs, the fiber source draws far less power than CO₂ technology and uses no consumable laser gas, so cost per part falls noticeably.
• Maximum safety, a fully enclosed cabin, visual collision detection and active anti-collision protect both the operator and the cutting head.
• Remnant value recovery, the remnant nesting function re-lays parts onto offcuts, turning scrap into added value.
• One supplier for the whole workflow, installation, training and service from the same team, with no juggling between multiple partners.
The fiber laser cutting machine is configured to match your production: higher power for greater thickness and speed, a larger table for full sheets. The main parameters are below; final specifications are set together, based on your materials and volumes.
| Parameter | Value |
|---|---|
| Laser source power | 3,000 – 30,000 W (by configuration) |
| Working area | 3,000 × 1,500 mm (up to 6,000 × 2,500 mm) |
| Positioning speed | 200 m/min |
| Maximum acceleration | up to 4 G |
| Positioning accuracy | ±0.03 mm |
| Repeatability | ±0.02 mm |
| Source type | Premium fiber (Raycus / IPG) |
| Cutting head | Autofocus with automatic Z-axis control |
| Control system | Dedicated CNC with automatic nesting |
| Protection | Fully enclosed cabin |
| Automatic nozzle changer | Yes |
| Certification | CE |
A fiber laser cutting machine serves metal fabrication for construction, metal furniture, automotive components, electrical enclosures, signage and sheet structures. Workshops that bring sheet cutting in-house stop splitting orders between subcontractors and gain full control over lead times. It is the natural choice for metalworking firms that want a predictable workflow with better margins on every job.
The system suits both varied one-off production and high-volume series runs. The unit complies with the applicable requirements for CE-marked industrial equipment, in line with the Machinery Directive 2006/42/EC. For larger volumes and thicker plate, see the high-power metal laser cutting machine in the same family.
In agricultural equipment, metal cabinets and structural work, the fiber laser cutting machine shortens the path from design to prototype and delivers compliant parts with no manual finishing. Automotive suppliers get batch-after-batch repeatability, while signage shops win on fine detail, cut-out text, perforations and complex contours on thin stainless steel.
Cutting service providers use the fiber laser cutting machine to accept varied orders, from a single part to series production, without turning work away for lack of capacity. High positioning speed combined with automatic nozzle changing keeps cycle time low even on mixed lots, with different materials and thicknesses on the same table.
Because a single fiber laser cutting machine covers such a wide material and thickness range, it consolidates jobs that would otherwise need punching, sawing and plasma. Consolidating processes onto one platform also simplifies quoting: one machine rate, one operator and one predictable throughput figure make it far easier to price work accurately and protect your margin on every contract.
The system processes most common shop metals. Maximum thickness depends on source power and assist gas; the values below are indicative for a 6 kW source and are confirmed in the personalized quotation.
On carbon steel, oxygen cutting gives maximum speed on thick plate, while nitrogen produces a clean edge on stainless steel and aluminium. For reflective materials such as brass and copper, the autofocus head and premium fiber source ensure stable beam coupling with no back-reflection risk.
| Material | Indicative thickness (6 kW) |
|---|---|
| Carbon steel | up to ~25 mm |
| Stainless steel | up to ~12 mm |
| Aluminium | up to ~10 mm |
| Brass / copper | up to ~8 mm |
The workflow on a fiber laser cutting machine is simple and repeatable, from file to finished part:
1. The operator imports the part's DXF/DWG file into the control software.
2. They select material and thickness; the system proposes the cutting parameters automatically.
3. The sheet is placed on the table, and the nesting function optimizes material usage.
4. The autofocus head automatically adjusts cutting distance along the contour.
5. The machine cuts the parts to plan, changing the nozzle automatically where needed.
6. The operator removes the finished parts, ready for bending, welding or assembly.
Because the software stores cutting recipes by material and thickness, repeating a recurring order takes a few clicks, and a new operator quickly reaches consistent results, a real advantage for shops with staff turnover.
Beyond day-to-day cutting, the automatic nesting and stored recipes turn the fiber laser cutting machine into a planning tool: you can estimate material consumption before a run, batch similar parts to reduce sheet changes, and keep a consistent quality standard across shifts. That predictability is what lets a growing shop take on larger contracts with confidence.
What maximum thickness does the fiber laser cutting machine reach?
With a 6 kW source it cuts approximately carbon steel up to ~25 mm, stainless steel up to ~12 mm and aluminium up to ~10 mm. Exact values depend on assist gas and configuration; we confirm them in the personalized quotation.
Why is it faster than plasma or punching?
Positioning at 200 m/min and acceleration up to 4 G sharply cut dead time between cuts, while full automation removes manual setup. The result is a much shorter cycle and more parts per shift.
What warranty and support does UZINEX provide?
Every UZINEX machine comes with a 60-month standard manufacturer warranty, phone support and on-site service intervention in under 24 hours anywhere in Romania.
How long does installation and commissioning take?
Transport, commissioning and operator training are included and carried out by our team. Before shipping, the machine goes through full testing, so your workshop becomes operational quickly, with no hidden costs.
Which assist gases does the machine use?
Oxygen delivers maximum speed on thick carbon steel, nitrogen gives a clean, oxide-free edge on stainless steel and aluminium, and compressed air lowers cost per part on thin gauges. The system switches parameters automatically by material and gas.
What maintenance does a fiber source need?
A fiber source has no consumable optics like CO₂ technology, so maintenance comes down to periodic checks, cleaning the protective lens and monitoring the cooling system. Downtime falls considerably and upkeep costs stay predictable, which makes the total cost of ownership easy to plan over the life of the machine.
When you choose a fiber laser cutting machine from UZINEX, you get more than the unit, you get a long-term technical partner:
• Premium-grade technology, premium fiber source, autofocus head and CNC control with nesting, exactly the components used in machines several times more expensive.
• Direct manufacturer pricing, direct delivery, without the chain of intermediaries that inflates price; you invest in technology and components, not markups.
• Extended warranty, long-term coverage on the machine and critical components, a worry-free investment for a unit you rely on daily.
• Technical consulting at purchase, we help you size source power and table format correctly for your order mix, so you don't pay for unused capacity.
• Everything for installation, included, pre-delivery testing, transport, commissioning and operator training, delivered by a team that understands workshop pace.
• Long-term local support, spare parts available, fast intervention and, on request, sourcing for equipment not listed on the site.
• CE conformity, certified components and conformity documentation, built to international standards.
With positioning at 200 m/min, ±0.03 mm accuracy and direct-manufacturer pricing, this fiber laser cutting machine turns every order you accept into net profit, with no hidden costs and no compromise on quality. Every month without your own unit means jobs sent to subcontractors and margins you never get back, while a shop that owns its cutting capacity sets its own lead times and quotes with confidence.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
