Automatic edge banding machine equipped with two glue pots, able to perform pre-milling procedures…
| Overall dimensions (L×W×H) | 8.650 × 970 × 1.800 mm |
| Total power | 16,5 kW |
| Feed speed | 15 – 23 m/min |
| Electric lifting | 0,37 kW |
| Panel thickness | 10 – 60 mm |
| Minimum panel length | ≥ 120 mm |
| Minimum panel width | ≥ 80 mm |
| Edge band thickness | 0,4 – 3 mm |
| Working pressure | 0,6 MPa |
| Glue pots | 2 independent pots |
| Pre-milling | Included |
| Stage | Description |
| Pre-milling | Levelling of the panel edge before adhesive application |
| Gluing + edge band application | Adhesive dosing from the active pot + pressing of 0,4–3mm edge band |
| End trimming | Automatic cut-off to the exact panel length |
| Coarse + fine trimming | Removal of excess edge band above and below |
| Profiling | Rounding or profiling of the edge band |
| Scraping | Removal of adhesive residue from the panel surface |
| Buffing | Final finishing with a high-speed motor |
The edge banding machine with two glue pots is the automatic edge banding equipment with pre-milling for furniture factories and medium-to-large production workshops that work with two adhesive colours or frequently switch the type of adhesive and need to eliminate the downtime spent cleaning the glue pot between batches. The edge banding machine with two glue pots has a total power of 16,5kW, a feed speed of 15–23m/min, dimensions of 8650×970×1800mm and processes panels with a thickness of 10–60mm, a minimum length of 120mm, a minimum width of 80mm and an edge band of 0,4–3mm.
The edge banding machine with two glue pots performs in an automatic cycle: pre-milling, gluing, edge band application, end trimming, coarse and fine trimming, profiling, scraping and buffing. The two independent glue pots of the edge banding machine with two glue pots allow rapid switching between two types or colours of adhesive without cleaning the active pot, eliminating non-productive time when changing batch. Transport, installation and commissioning included. 60-month warranty. Technical specifications: edge banding machine with two glue pots
| Parameter | Value |
|---|---|
| Overall dimensions (L×W×H) | 8.650 × 970 × 1.800 mm |
| Total power | 16,5 kW |
| Feed speed | 15 – 23 m/min |
| Electric lifting | 0,37 kW |
| Panel thickness | 10 – 60 mm |
| Minimum panel length | ≥ 120 mm |
| Minimum panel width | ≥ 80 mm |
| Edge band thickness | 0,4 – 3 mm |
| Working pressure | 0,6 MPa |
| Glue pots | 2 independent pots |
| Pre-milling | Included |
Integrated automatic stages: edge banding machine with two glue pots
| Stage | Description |
|---|---|
| Pre-milling | Levelling of the panel edge before adhesive application |
| Gluing + edge band application | Adhesive dosing from the active pot + pressing of 0,4–3mm edge band |
| End trimming | Automatic cut-off to the exact panel length |
| Coarse + fine trimming | Removal of excess edge band above and below |
| Profiling | Rounding or profiling of the edge band |
| Scraping | Removal of adhesive residue from the panel surface |
| Buffing | Final finishing with a high-speed motor |
The edge banding machine with two glue pots is configured at quotation according to the range of panels and the types of edge band used. Free technical consultancy available. Advantages of the edge banding machine with two glue pots
• Two independent glue pots: rapid switching between adhesive colours and types without cleaning. The edge banding machine with two glue pots has two independent EVA pots, each with its own heating and dosing system, allowing a single switch to change between two adhesive colours or types. In factories with cabinets in different colours, the edge banding machine with two glue pots eliminates pot cleaning at every batch change, a 30–60 minute operation that halts the line.
• Integrated pre-milling: the edge surface prepared chemically and mechanically for the EVA adhesive. The edge banding machine with two glue pots has a pre-milling unit that levels the panel edge before adhesive application, eliminating residual waviness from cutting and ensuring a perfectly flat, clean surface for optimal adhesion of the EVA adhesive. The integrated pre-milling of the edge banding machine with two glue pots is critical for panels whose edge was previously cut with saws that leave visible marks and for painted MDF panels where adhesive applied to uneven surfaces causes the band to peel off in service.
• Total power 16,5kW: high-speed motor for intensive finishing units. The edge banding machine with two glue pots has an installed power of 16,5kW that drives the intensive trimming, profiling and finishing units with high-speed motors, ensuring consistent trimming and buffing quality across the entire 15–23m/min feed speed. The higher power of the edge banding machine with two glue pots compared with lower-power equipment translates into the quality of the banded surface and into the durability of the cutting tools over large production volumes.
“A high-speed motor for intensive finishing units.”
• Panel thickness 10–60mm and edge band 0,4–3mm with a minimum length of 120mm: short panels included. The edge banding machine with two glue pots processes panels with a minimum length of 120mm, covering the short fronts of kitchens with small modules and small-format partition panels. The full range of thicknesses 10–60mm and edge band 0,4–3mm of the edge banding machine with two glue pots ensures compatibility with all panels in the furniture factory's production, from 18mm chipboard with a thin band to a 60mm worktop with a thick ABS band.
• Feed speed 15–23m/min with 0,37kW electric lifting: high productivity and rapid reconfiguration. The edge banding machine with two glue pots combines a high feed speed with electric height adjustment of the conveyor table, allowing the panel thickness to be changed quickly without manual cranking. At 23m/min, the edge banding machine with two glue pots ensures a consistent throughput of banded panels per 8-hour shift, suitable for factories with steady orders of series furniture.
• Complete 8-stage cycle with profiling and buffing: a finished edge ready for delivery. The edge banding machine with two glue pots finishes the edge in 8 successive stages: pre-milling, gluing, banding, end trimming, coarse trimming, fine trimming, profiling, scraping and buffing. The panel leaves the edge banding machine with two glue pots with a fully finished edge, free of adhesive residue and with a profiled edge: superior quality achieved with no additional manual operations. 60-month UZINEX warranty, nationwide technical support 24–48 hours.
Applications: edge banding machine with two glue pots
Manufacturers of office furniture, commercial furniture and wood products with strict adhesion requirements on panels.
UZINEX edge banding machine with two glue tanks: 2 independent adhesive tanks, integrated pre-milling.
A complete line for the production of panels and fronts.
Made-to-order furniture factories producing mixed batches with different combinations of cabinet and edge colours use the edge banding machine with two glue pots to eliminate downtime when changing the adhesive. A batch of white cabinets with white adhesive is immediately followed by a batch of walnut cabinets with walnut adhesive: the edge banding machine with two glue pots switches between pots in a few seconds, with no cleaning, no cooling and reheating.
Manufacturers of office furniture, commercial furniture and wooden products with strict adhesion requirements on painted MDF or high-gloss melamine panels use the edge banding machine with two glue pots thanks to the pre-milling unit that prepares the edge surface for optimal adhesion of the EVA adhesive. On high-gloss panels, an imperfect edge surface visibly produces a lack of edge adhesion, and pre-milling eliminates this risk. Frequently asked questions about the edge banding machine with two glue pots
Can the two pots of the edge banding machine with two glue pots hold different adhesives at the same time?
Yes. The edge banding machine with two glue pots has two completely independent pots, each with its own heating, temperature control and dosing system. They can simultaneously hold EVA adhesives of different colours or types. Switching between pots is done from the control panel without stopping the line and with no intermediate cleaning. Is the edge banding machine with two glue pots eligible for EU funding?
Yes. UZINEX is a member of the Enterprise Europe Network and supplies equipment for EU-funded projects. The edge banding machine with two glue pots can be included in SEAP/SICAP. Leasing and credit options on the UZINEX credit and leasing page. Why UZINEX for the edge banding machine with two glue pots
• Configuration included: UZINEX sets up the edge banding machine with two glue pots with the optimal parameters for the types of edge band and panels in the customer's production.
• Transport, installation and commissioning included: installation, pre-milling calibration and complete operator training.
• 60-month warranty: extended coverage for continuous high-volume furniture production.
• Spare parts in stock: components available quickly in Romania.
• Nationwide technical support 24–48 hours: technicians with nationwide coverage.
• EU-funding eligible: complete technical documentation for PNRR, POR and other active programmes.
UZINEX edge banding machine with two glue pots: 2 independent glue pots, integrated pre-milling, 16,5kW, 15–23m/min, panel 10–60mm / ≥120mm / ≥80mm, edge band 0,4–3mm, 8 automatic stages (pre-milling+gluing+banding+trimming+profiling+scraping+buffing), 0,37kW electric lifting, 8650×970×1800mm, 60-month warranty, transport, installation and commissioning included throughout Romania.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
