This semi-automatic edge banding machine can perform the functions of feeding, gluing, trimming, milling, finishing…
| Feed speed | 12 – 22 m/min |
| Panel thickness | 10 – 60 mm |
| Edge band thickness | 0,4 – 3 mm |
| Working pressure | 0,6 MPa |
| Low-voltage electrical device | LS Power Generation, Korea |
| Temperature control panel | Autonics, Korea |
| Travel switch | Kaikun, Korea |
| Cylinder | WSN |
| Function | Description |
| Adhesive gluing | Uniform application of EVA adhesive on the panel edge |
| Edge band application | Banding of PVC / veneer / melamine edge band 0,4–3mm |
| Fine trimming | Trimming the ends of the edge band to the exact length |
| Milling | Removing the excess edge band above and below |
| Sanding | Smoothing the edge band corner after milling |
| Polishing | Final finishing of the edge band surface |
| Panel material | Edge type |
| MDF (plain / painted / foiled) | Straight + curved |
| Chipboard (with/without melamine) | Straight + curved |
| Eco panels | Straight + curved |
| Structural and decorative plywood | Straight + curved |
| Solid wood | Straight + curved |
| Aluminium honeycomb panels | Straight + curved |
The semi-automatic edge banding machine for plywood, portable, for small workshops is the compact edge banding equipment for joiners, small production workshops and custom furniture makers who need to apply edge banding to straight and curved edges on panels of MDF, chipboard, plywood, solid wood and aluminium honeycomb panels, without the investment in a large, high-cost automatic machine. The semi-automatic edge banding machine for plywood, portable, for small workshops has a feed speed of 12–22m/min, panel thickness of 10–60mm and edge thickness of 0,4–3mm at a working pressure of 0,6MPa.
The semi-automatic edge banding machine for plywood, portable, for small workshops is equipped with a low-voltage electrical device by LS Korea Power Generation, a temperature control panel by Autonics Korea, a travel switch by Kaikun Korea and a WSN cylinder. It performs in a semi-automatic cycle: adhesive gluing, edge band application, fine trimming, milling, sanding and polishing. Transport, installation and commissioning included. 60-month warranty.
Technical specifications: semi-automatic edge banding machine for plywood, portable, for small workshops
| Parameter | Value |
|---|---|
| Feed speed | 12 – 22 m/min |
| Panel thickness | 10 – 60 mm |
| Edge band thickness | 0,4 – 3 mm |
| Working pressure | 0,6 MPa |
| Low-voltage electrical device | LS Power Generation, Korea |
| Temperature control panel | Autonics, Korea |
| Travel switch | Kaikun, Korea |
| Cylinder | WSN |
Integrated functions: semi-automatic edge banding machine for plywood, portable, for small workshops
| Function | Description |
|---|---|
| Adhesive gluing | Uniform application of EVA adhesive on the panel edge |
| Edge band application | Banding of PVC / veneer / melamine edge band 0,4–3mm |
| Fine trimming | Trimming the ends of the edge band to the exact length |
| Milling | Removing the excess edge band above and below |
| Sanding | Smoothing the edge band corner after milling |
| Polishing | Final finishing of the edge band surface |
Compatible materials
“The portable semi-automatic edge banding machine for plywood, for small workshops, lets small workshops reorganise their work space or transport the equipment.”
| Panel material | Edge type |
|---|---|
| MDF (plain / painted / foiled) | Straight + curved |
| Chipboard (with/without melamine) | Straight + curved |
| Eco panels | Straight + curved |
| Structural and decorative plywood | Straight + curved |
| Solid wood | Straight + curved |
| Aluminium honeycomb panels | Straight + curved |
The semi-automatic edge banding machine for plywood, portable, for small workshops is configured at the quotation stage. Free technical consultancy available.
Advantages of the semi-automatic edge banding machine for plywood, portable, for small workshops
• Portable and compact: moved and installed without fixed infrastructure. The semi-automatic edge banding machine for plywood, portable, for small workshops is designed as compact equipment, light enough to be moved and reinstalled in the workshop without floor anchors or fixed high-capacity pneumatic infrastructure. This portability of the semi-automatic edge banding machine for plywood, portable, for small workshops allows small workshops to reorganise their work space or to transport the equipment to the job site or to the customer who needs on-site edge banding.
• Straight and curved edges in the same equipment: maximum versatility for custom furniture. The semi-automatic edge banding machine for plywood, portable, for small workshops can apply edge banding both on the straight edges of standard panels and on the curved edges of profiled furniture fronts, rounded kitchen consoles and decorative panels with special contours. This capability of the semi-automatic edge banding machine for plywood, portable, for small workshops sets it apart from fixed-edge automatic machines that cannot process curved geometries without costly special accessories.
• LS Korea, Autonics Korea, Kaikun Korea components and WSN cylinder: reliability in continuous production. The semi-automatic edge banding machine for plywood, portable, for small workshops uses LS Power Generation Korea electrical devices, an Autonics Korea temperature panel, a Kaikun Korea switch and a WSN cylinder. The quality of these components ensures the stable operation of the semi-automatic edge banding machine for plywood, portable, for small workshops at 12–22m/min, without temperature variations or pressure fluctuations.
• Adjustable feed speed 12–22m/min: adaptation to material and operator experience. The semi-automatic edge banding machine for plywood, portable, for small workshops allows the feed speed to be adjusted between 12m/min for curved panels or 3mm thick edge banding that requires more pressing and gluing time and 22m/min for straight panels with thin 0,4mm edge banding. The speed flexibility of the semi-automatic edge banding machine for plywood, portable, for small workshops also makes it accessible to operators with no prior experience, who can start at low speed and increase progressively.
Joinery and made-to-order furniture workshops with varied orders and small volumes use the edge banding machine.
Custom furniture manufacturers: made-to-order wardrobes, bookcases with special shapes.
A complete line for the production of panels and fronts.
• Compatibility with MDF, chipboard, plywood, solid wood and aluminium honeycomb panels: a single piece of equipment for all materials in the workshop. The semi-automatic edge banding machine for plywood, portable, for small workshops processes all panel materials used in joinery and furniture workshops: 18mm MDF panels for kitchen carcasses, 12mm plywood for cabinet backs, 40mm solid wood for fronts and worktops and aluminium honeycomb panels for lightweight composite doors. This wide range of the semi-automatic edge banding machine for plywood, portable, for small workshops eliminates the need for different equipment for different panel types.
• Complete 6-stage cycle: gluing, banding, trimming, milling, sanding, polishing. Finished edge with no additional manual operations. The semi-automatic edge banding machine for plywood, portable, for small workshops completes the panel edge in 6 successive stages within the same compact equipment. The panel exits the semi-automatic edge banding machine for plywood, portable, for small workshops with the edge band applied, trimmed, milled, sanded and polished, ready for assembly or finishing, with no additional manual sanding. 60-month UZINEX warranty, national technical support within 24–48 hours.
Applications: semi-automatic edge banding machine for plywood, portable, for small workshops
Joiners and made-to-order furniture workshops with varied orders and small volumes use the semi-automatic edge banding machine for plywood, portable, for small workshops as their main edge banding equipment, replacing manual edge banding with adhesive and spatula: a slow method, with variable gluing quality and a risk of bubbles and non-adhesion. The semi-automatic edge banding machine for plywood, portable, for small workshops ensures consistent edge band quality along the entire length of the panel, regardless of operator experience.
Custom furniture makers (made-to-order wardrobes, bookcases with special shapes, tables with curved contours) use the semi-automatic edge banding machine for plywood, portable, for small workshops thanks to its ability to band curved edges without additional accessories. Furniture with profiles and special contours requires equipment that follows the panel shape at low speed, and the semi-automatic edge banding machine for plywood, portable, for small workshops allows the speed to be adjusted to 12m/min for complex geometries.
Frequently asked questions about the semi-automatic edge banding machine for plywood, portable, for small workshops
What types of edge banding can the semi-automatic edge banding machine for plywood, portable, for small workshops apply?
The semi-automatic edge banding machine for plywood, portable, for small workshops processes PVC edge banding, natural or engineered veneer edge banding, melamine edge banding and plastic edge banding, with thicknesses of 0,4–3mm. The type of EVA adhesive and the reservoir temperature are adjusted according to the edge band type. At installation, UZINEX provides the recommended settings for the materials used in the specific production.
Is the semi-automatic edge banding machine for plywood, portable, for small workshops eligible for European funding?
Yes. UZINEX is a member of the Enterprise Europe Network and supplies equipment for EU-funded projects. The semi-automatic edge banding machine for plywood, portable, for small workshops can be listed in SEAP/SICAP. Leasing and credit options on the UZINEX credit and leasing page.
Why UZINEX for the semi-automatic edge banding machine for plywood, portable, for small workshops
• Configuration included: UZINEX sets up the semi-automatic edge banding machine for plywood, portable, for small workshops with the optimal parameters for the materials and edge band types in the customer's production.
• Transport, installation and commissioning included: complete installation and operator training.
• 60-month warranty: extended coverage for made-to-order furniture production.
• Spare parts in stock: WSN, LS Korea, Autonics components quickly available in Romania.
• National technical support within 24–48 hours: technicians with nationwide coverage.
• Eligible for European funding: complete technical documentation for PNRR, POR and other active programmes.
Semi-automatic edge banding machine for plywood, portable, for small workshops UZINEX: portable, straight+curved edges, 12–22m/min, edge band 0,4–3mm, panel 10–60mm, 0,6MPa, LS Korea Power Generation + Autonics Korea + Kaikun Korea + WSN cylinder, 6 stages (gluing+banding+trimming+milling+sanding+polishing), compatible with MDF/chipboard/plywood/solid wood/aluminium honeycomb, 60-month warranty, transport, installation and commissioning included throughout Romania.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
