Fully enclosed fiber laser machine, automatic shuttle table, AI cutting system, 7-zone Donaldson fume extraction, 5 models (FE 3015–FE 8025), IPG/Raycus sources 1,5–30 kW, accuracy ±0,03 mm.
| Laser power (kW) | 1,5 – 30 (configurable) |
| Cutting table dimensions (mm) | 3000×1500 |
| Max. carbon steel thickness (mm) | 30 |
| Max. stainless steel thickness (mm) | 20 |
| Positioning accuracy (mm) | ±0,03 |
| Repositioning accuracy (mm) | ±0,02 |
| Acceleration (G) | 1,5 |
| Maximum speed (m/min) | 100 |
| Electrical supply | 380V three-phase |
| Shuttle table | Automatic |
| Protection system | Enclosed CE housing, REER/Schmersal curtains |
| AI control system | Fscut AI, free update 3 years |
| Extraction system | 7 zones Donaldson USA, self-cleaning |
| Laser source | IPG / Raycus warranty 1–5 years |
The WyCut FE Series is a fully enclosed fiber laser machine, with an automatic shuttle table and an AI cutting-optimization system, available in 5 configurations (from the FE 3015 to the FE 8025) with laser power between 1,5 kW and 30 kW. The fully enclosed housing compliant with European protection standards, the automatic shuttle table for eliminating downtime, and the intelligent 7-zone dust and fume extraction system make this fully enclosed fiber laser machine the reference solution for plants that combine maximum productivity with operator safety and compliance with environmental regulations.
Compared with single open-platform machines, the WyCut FE Series fully enclosed fiber laser machine adds four decisive advantages: the protective housing that isolates the laser radiation, fumes and sparks; the automatic shuttle table that allows the new sheet to be loaded while cutting continues on the other table; the AI system that automatically optimizes the cutting parameters; and the professional Donaldson USA fume extraction system with self-cleaning. The result is a machine utilization close to 100% per shift, with zero operator exposure to hazardous substances.
Key advantages of the WyCut FE Series fully enclosed fiber laser machine
• Fully enclosed housing: CE protection with light curtains. The WyCut FE Series fully enclosed fiber laser machine complies with European protection standards for laser radiation, with a sealed housing, laser sensors and REER Italy / Schmersal Germany light curtains that immediately stop the machine at any unauthorized opening during operation.
• Automatic shuttle table: minimal changeover time. While cutting takes place on one table, the operator loads the sheet on the other table; the automatic changeover practically eliminates loading-unloading downtime, increasing the effective utilization of the fully enclosed fiber laser machine to nearly 100% per shift.
• AI cutting system: automatic parameter optimization. The intelligent AI cutting system automatically optimizes the power, speed and gas parameters for each material and thickness, eliminating dependence on highly experienced operators and ensuring constant quality regardless of the team's level of training.
• Intelligent 7-zone dust and fume extraction system: Donaldson USA. The professional system with 7 independent extraction zones, Donaldson USA filtration and self-cleaning ensures that fumes and particles are removed from the cutting area in real time, in compliance with European workplace air-quality regulations.
• Automatic material feeding system: productivity +30%. The automatic feeding, guiding and lateral sheet-adjustment system reduces manual intervention and increases the productivity of the fully enclosed fiber laser machine by up to 30% compared with manual loading on open-platform machines.
• IPG or Raycus laser source with 1–5 year warranty: the high-power laser sources from IPG Germany or Raycus ensure stability, high energy efficiency and a service life of over 100,000 hours, with an extended warranty from the source manufacturer.
• Free AI software updates for 3 years: the Fscut AI system is updated free of charge for 3 years from delivery, bringing algorithm improvements, new material profiles and additional functionality at no extra cost to the customer.
Technical specifications of the WyCut FE Series fully enclosed fiber laser machine
| Parameter | FE 3015 | FE 4015 | FE 4020 | FE 6015 | FE 8025 |
|---|---|---|---|---|---|
| Laser power (kW) | 1,5 – 30 (configurable) | 1,5 – 30 (configurable) | 1,5 – 30 (configurable) | 1,5 – 30 (configurable) | 1,5 – 30 (configurable) |
| Cutting table dimensions (mm) | 3000×1500 | 4000×1500 | 4000×2000 | 6000×1500 | 8000×2500 |
| Max. carbon steel thickness (mm) | 30 | 30 | 30 | 30 | 30 |
| Max. stainless steel thickness (mm) | 20 | 20 | 20 | 20 | 20 |
| Positioning accuracy (mm) | ±0,03 | ±0,03 | ±0,03 | ±0,03 | ±0,03 |
| Repositioning accuracy (mm) | ±0,02 | ±0,02 | ±0,02 | ±0,02 | ±0,02 |
| Acceleration (G) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Maximum speed (m/min) | 100 | 100 | 100 | 100 | 100 |
| Electrical supply | 380V three-phase | 380V three-phase | 380V three-phase | 380V three-phase | 380V three-phase |
| Shuttle table | Automatic | Automatic | Automatic | Automatic | Automatic |
| Protection system | Enclosed CE housing, REER/Schmersal curtains | Enclosed CE housing, REER/Schmersal curtains | Enclosed CE housing, REER/Schmersal curtains | Enclosed CE housing, REER/Schmersal curtains | Enclosed CE housing, REER/Schmersal curtains |
| AI control system | Fscut AI, free update 3 years | Fscut AI, free update 3 years | Fscut AI, free update 3 years | Fscut AI, free update 3 years | Fscut AI, free update 3 years |
| Extraction system | 7 zones Donaldson USA, self-cleaning | 7 zones Donaldson USA, self-cleaning | 7 zones Donaldson USA, self-cleaning | 7 zones Donaldson USA, self-cleaning | 7 zones Donaldson USA, self-cleaning |
| Laser source | IPG / Raycus warranty 1–5 years | IPG / Raycus warranty 1–5 years | IPG / Raycus warranty 1–5 years | IPG / Raycus warranty 1–5 years | IPG / Raycus warranty 1–5 years |
The WyCut FE Series versus the WyCut S Series: when to choose the fully enclosed housing
The WyCut S Series with a single open platform is the solution for workshops that prioritize accessibility, a small footprint and a lower initial cost. The WyCut FE Series fully enclosed fiber laser machine is the choice for plants that have strict safety requirements (mandatory CE protection), high production volumes where the automatic shuttle table makes the difference, or work environments where exposure to fumes and radiation must be eliminated.
European workplace regulations for sites with industrial-power laser equipment (class 4) impose strict protective measures against radiation, fumes and sparks. The WyCut FE Series fully enclosed fiber laser machine meets these requirements by design, eliminating the need for separate workspace-protection measures and simplifying compliance with occupational health and safety regulations.
Applications and industries for the WyCut FE Series fully enclosed fiber laser machine
The WyCut FE Series fully enclosed fiber laser machine is intended for continuous-production plants that process high volumes of metal sheets in multi-shift production, where maximum productivity and operator safety are simultaneous requirements. The automatic shuttle table and the AI system make it the standard solution for automated or semi-automated production lines.
Manufacturers of electrical cabinets, HVAC equipment, facade panels and architectural metal structures use the FE 4020 and FE 6015 models of the fully enclosed fiber laser machine for the wide formats and extended lengths needed for large components. The FE 8025 model with the 8000×2500 mm table is intended for manufacturers of large structures or plants that simultaneously process extra-large format sheets.
Plants with ISO environmental and occupational-safety certifications find in the WyCut FE Series fully enclosed fiber laser machine a piece of equipment that contributes directly to maintaining the certifications, through the Donaldson extraction system compliant with air-quality regulations and the CE protective housing.
How the WyCut FE Series fully enclosed fiber laser machine works
1. Sheet loading on the free table: while the fully enclosed fiber laser machine cuts on the active table, the operator or the automatic feeding system loads the new sheet on the waiting table, without stopping production.
2. Automatic table changeover: when the program on the active table is completed, the automatic changeover brings the new table into the cutting position in a few seconds, minimizing downtime between batches.
3. AI parameter optimization: the AI system analyzes the selected material and thickness and automatically optimizes the laser power, cutting speed and assist-gas pressure for maximum quality and minimum consumption.
4. Cutting in the enclosed housing: cutting takes place entirely inside the enclosed housing; the 7-zone extraction system removes fumes and particles in real time, with the Donaldson filters retaining the fine particles.
5. Monitoring and automatic safety: the light curtains and sensors continuously monitor the integrity of the housing; any unauthorized opening during operation immediately stops the fully enclosed fiber laser machine for operator protection.
6. Unloading and preparing the next batch: the finished parts are unloaded from the free table while cutting continues; the cycle resumes without stops between consecutive batches.
Frequently asked questions about the WyCut FE Series fully enclosed fiber laser machine
Why is a fully enclosed housing necessary on an industrial laser machine?
Industrial-power fiber lasers (3 kW and above) are classified in laser safety class 4, the most dangerous, capable of causing instantaneous eye and skin injuries even from indirect reflections. The WyCut FE Series fully enclosed fiber laser machine completely contains the radiation inside the housing, eliminating the need for exclusion zones, special protective glasses or complex safety procedures. Under European workplace safety regulations, the use of an unprotected class-4 laser machine imposes additional costly measures.
How long does the automatic table changeover take on the WyCut FE Series?
The automatic table changeover of the WyCut FE Series fully enclosed fiber laser machine is performed in a few seconds, with precise synchronization ensured by the HIWIN system. The exact changeover time depends on the table size and the selected model. Compared with manual loading on a single-platform machine, which can take 2–5 minutes, the automatic changeover increases the effective machine utilization by 15–25% per 8-hour shift depending on the production pace.
Is the WyCut FE Series fully enclosed fiber laser machine eligible for European funding?
Yes. UZINEX supplies equipment for EU-funded projects (NRRP, the Regional Program, the Just Transition Program) and is a member of the Enterprise Europe Network. The WyCut FE Series fully enclosed fiber laser machine can be included in funding applications for modernizing production capacity. UZINEX provides the complete technical documentation for public procurement procedures and tenders.
Why UZINEX for the WyCut FE Series fully enclosed fiber laser machine
• Free technical consultancy: optimal model and power. UZINEX evaluates the materials and thicknesses processed, the production volume and the safety requirements to recommend the optimal model and laser power in the WyCut FE range.
• Transport, installation and commissioning included free of charge: the fully enclosed fiber laser machine is delivered, installed and started at the customer's site, with calibration of the AI system, testing on the real materials and operator training.
• Extended 60-month warranty: warranty included for the entire equipment line, with technical support and intervention in under 36 hours.
• National technical support in under 36 hours: on-site or video intervention in less than 36 hours, with a dedicated 24/7 telephone line.
• AI smart manual included: complete documentation with AI assistance for over 96% of technical requests.
• Full eligibility for European funding: complete documentation and support for EU-, NRRP- or structural-funds procurement.
The WyCut FE Series fully enclosed fiber laser machine is the industrial solution for plants that combine maximum productivity through the automatic shuttle table, complete safety through the CE housing and artificial intelligence for the cutting parameters, in 5 models from 3000×1500 mm to 8000×2500 mm, with laser power of 1,5–30 kW.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.
Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→
„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.
