LAZIRON R coil sheet laser cutting machine: Cypcut, RayTools, premium fiber. Industrial quality at an affordable price for European metalworking workshops.
| Fiber laser source power | 1.5 / 3 / 6 kW (optional) |
| Usable coil width | 1500 mm (standard) or 2000 mm |
| Maximum coil weight | 10 tonnes |
| Maximum coil outer diameter | 1600 mm |
| Permissible sheet thickness | 0.5 – 6 mm |
| Leveling | 11-roller configuration |
| Maximum material feed speed | 30 m/min |
| Feed positioning accuracy | ±0.1 mm |
| Numerical control system | PC-based Cypcut with continuous module |
| Cutting head | RayTools with capacitive autofocus |
| Cooling system | S&A water chiller |
The LAZIRON R is a coil fed laser cutting machine that cuts parts straight from the coil, with no shearing into blanks first. The strip is uncoiled, flattened on 11 rollers and fed into the cutting zone, where the head cuts parts on successive lengths of strip.
This fiber laser cutting machine runs a 1.5, 3 or 6 kW source, matched to the 0.5–6 mm thickness typical of coils. Usable width is 1500 mm as standard or 2000 mm, and the uncoiler takes coils of up to 10 tonnes with an outer diameter of up to 1600 mm.
The coil sits on a motorised mandrel with hydraulic centring. The 11-roll leveller removes coil set, and a servo feed pushes the strip into the cutting zone at up to 30 m/min with ±0.1 mm accuracy. When a strip length is finished, the machine advances the next one and the program carries on.
The RayTools head with capacitive autofocus compensates small thickness variations in rolled strip. Cypcut runs in continuous mode and nests parts on long strip lengths, free of the fixed edges of a blank, while finished parts drop onto the discharge conveyor, apart from the scrap.
| Parameter | Value |
|---|---|
| Fiber laser source power | 1.5 / 3 / 6 kW (optional) |
| Usable coil width | 1500 mm (standard) or 2000 mm |
| Maximum coil weight | 10 tonnes |
| Maximum coil outer diameter | 1600 mm |
| Permissible sheet thickness | 0.5 – 6 mm |
| Leveling | 11-roller configuration |
| Maximum material feed speed | 30 m/min |
| Feed positioning accuracy | ±0.1 mm |
| Numerical control system | PC-based Cypcut with continuous module |
| Cutting head | RayTools with capacitive autofocus |
| Cooling system | S&A water chiller |
Cold-rolled steel is cut at 0.5–6 mm, DX51D and DX52D galvanised steel at 0.5–3 mm, 304 and 316L stainless steel at 0.5–4 mm, and 1050 and 5754 aluminium at 0.5–3 mm.
As a sheet metal laser cutting machine for long runs of thin parts, it suits HVAC and ventilation duct makers, appliance plants, industrial electronics enclosures and outdoor lighting. Parts go straight on to bending or automatic welding, with no intermediate stock of blanks.
Coil width and maximum thickness decide the source power and the uncoiler version. Send us your part list and materials, and Uzinex engineers work out the right configuration.
• Delivery, installation and commissioning, with operator training on your own parts.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.