- UZINEX is THEO's first distribution partner in Romania: the MA1 laser welders, the TM laser cleaning machines, the wire feeders, the BAY enclosures and the safety equipment are sold and serviced through UZINEX.
- The MA1 series has four laser welding machines from 800 to 2,000 W, fully air-cooled, from €7,182 + VAT with the T1 wire feeder, delivery, commissioning and a 60-month warranty included.
- In the THEO test on 2 mm stainless steel, the MA1 welded the 500 mm seam in 29 seconds against 2 minutes 53 seconds with TIG, with 79% less gas and 91% less energy.
- Safety is built into the machine: a two-step trigger, workpiece contact control and interlocks with the BAY enclosure door and the VIZ-R2 helmet.
UZINEX becomes THEO's first distribution partner in Romania. From November 2026, the full range of THEO handheld lasers is sold, delivered, commissioned and serviced in Romania by UZINEX: the THEO handheld laser welders of the MA1 series, from 800 to 2,000 W, the TM pulsed laser cleaning machines, the wire feeders, the BAY safety enclosures, the VIZ-R helmets and the iPRO glasses.
For a workshop, the partnership brings three concrete things: an air-cooled handheld laser welding machine with a published price; a local partner who commissions it and trains the welders; and a 60-month warranty with an on-site response within 24 hours in Romania. Below we explain, with figures, what THEO technology delivers and why we chose it.
Why THEO: a brand built only for handheld laser welding
THEO is named after Theodore Maiman, the physicist who built the first working laser in 1960. The brand has a single focus: laser tools held in the hand. Its team brings laser engineers and welding engineers together, and every machine starts from the welding process. The result shows from the first working day: a 680 g torch, synergic setup by material, thickness and joint type, and air cooling with no chiller.
We chose THEO on the three criteria we apply to every machine in the UZINEX catalogue. The laser source must last as long as the factory. Safety must be built into the machine. Service must come with clear parts, procedures and response times. THEO meets all three, with published data.
The MA1 series: four laser welding machines from 800 to 2,000 W
Every MA1 model has a continuous-wave (CW) fiber laser at 1080 nm with a 20 µm fiber core, full air cooling and the THEO T1 wire feeder included in the price. The models differ in power and, with it, in the thickness welded in a single pass:
| Model | Laser power | Stainless and steel penetration | Aluminium penetration | Price from |
|---|---|---|---|---|
| THEO MA1-35 | 800 W | up to 3.5 mm | up to 3 mm | €7,182 + VAT |
| THEO MA1-45 | 1,200 W | up to 4.5 mm | up to 4 mm | €11,682 + VAT |
| THEO MA1-65 | 1,500 W | up to 6.5 mm | up to 5.5 mm | €17,982 + VAT |
| THEO MA1 ULTRA | 2,000 W | up to 8.5 mm | up to 6.5 mm | €22,482 + VAT |
These are the UZINEX shop prices, 10% below the THEO list price, and they include the T1 feeder, delivery and commissioning in Romania and the 60-month warranty.
The laser source: diodes rated for over 100,000 hours
The light starts in diodes that turn electric current into pump light, which the active fiber then amplifies. THEO rates the diodes for more than 100,000 operating hours, with an expected power loss of 3–5% over that life, covered by the adjustment reserve. A workshop welding 2,000 hours a year reaches that mark only after 50 years, so the cost of the source stays the one on the purchase invoice. The diode modules sit in gold-plated housings for thermal conductivity and protection against oxidation, and on the MA1-65 the 1.5 kW comes from eight modules sharing the load: each runs well below its limit, with built-in redundancy.
Air cooling: no chiller, no water
A conventional laser welding machine has a water chiller with antifreeze that takes up space, needs maintenance and makes the machine harder to move. The MA1 is fully air-cooled: three 125 W fans keep a constant airflow over the cooling plates, sensors adjust the fans in real time, and the machine works at ambient temperatures up to 45 °C. With no water circuit, there is no freezing risk in winter, no condensation on the optics and no coolant to change, and the machine fits on the CART V2 trolley, right next to the part.
The torch and the setup
The torch weighs 680 g and its body is made of aluminium and magnesium alloys that shed heat quickly. The beam passes a motor-driven galvo mirror that oscillates it across the width of the seam. On the screen, the operator picks the material, thickness and joint type, and the machine proposes the parameters in synergic mode. The THEO Toolbox mobile app adds a database of preliminary welding procedures (pWPS) for common materials, thicknesses and joints, with metallographic cross-sections of the welds, the THEO Academy courses and the machine's warranty codes.
TIG vs THEO MA1: the same weld, in numbers
In the THEO speed test, a TIG welder and an MA1 operator welded the same part: 1.4301 (AISI 304) stainless steel, T-joint, 2 mm sheet, 500 mm seam.
| Same 500 mm seam | TIG welding | THEO MA1 |
|---|---|---|
| Working time | 2:53 min | 0:29 min |
| Filler wire (316L) | 1,000 mm, 2.0 mm | 348 mm, 1.0 mm |
| Shielding gas | 34.6 l argon | 7.25 l nitrogen |
| Energy | 1.1 kWh | 0.1 kWh |
The result: 83% less time, 79% less gas and 91% less energy per seam. On one metre of this joint, TIG needs almost 6 minutes and the MA1 less than one. A workshop welding 50 metres of such seams a week gains about 4 hours of work per welder, every week. The laser weld comes out narrow and clean, with a small heat-affected zone, and thin sheet stays flat.
Safety built into the machine
A laser welder is a Class 4 laser (IEC/EN 60825-1), and THEO treats safety as a function of the machine:
- Two-step trigger: emission starts only after a double sequence, so an accidental press leaves the laser off.
- Workpiece contact control: a resistance loop checks contact with the part, and the laser fires only with the nozzle on the metal, in the right direction.
- Door interlock: a dual-channel circuit connects to the door of the BAY safety enclosure.
- Helmet interlock: two sensors in the VIZ-R2 laser welding helmet confirm that the operator wears it correctly.
BAY enclosures are certified to EN 12254:2010 with OD7 protection, go up in a few hours and come in 2 × 2, 3 × 2 and 4 × 2 m sizes. The VIZ-R2 and VIZ-R2+ helmets have OD7+ filters to EN 207, and the iPRO Amber glasses are EN 207 certified and fit over prescription glasses. The MA1 machines carry CE marking (Machinery Directive and EMC), RoHS and WEEE.
The TM series: pulsed laser cleaning
The second THEO family is pulsed laser cleaning. The TM 300-G has a Gaussian beam with 1.8 mJ per pulse, for heavy rust, mill scale and oxides. The TM 300-F has a Flat-Top beam with up to 15 mJ per pulse, for moulds, car bodies and surfaces that must stay untouched. Both have a 300 W MOPA source, a 100 × 30 mm scan field, air cooling and a 10.4-inch touchscreen, at €23,382 + VAT. The 500 W versions arrive in 2027. The physics of pulsed laser cleaning, with pulse energy and fluence worked out in numbers, is explained in our article on the laser cleaning demonstration at TECHNOVERS Expo 2026.
What you get from UZINEX as THEO's distribution partner
- Published prices, everything included: delivery, commissioning and warranty are in the price on the website.
- Commissioning and training in your workshop: the UZINEX engineer sets the machine up on your parts and trains the welders. THEO estimates 2 hours of training to the first welds and two weeks to a proficient operator.
- 60-month warranty, with an on-site response within 24 hours anywhere in Romania and within 24–72 hours in other countries.
- Spare parts and consumables: copper nozzles, protective windows, lenses, feed rollers and wire liners, ordered through UZINEX. The list is on the THEO spare parts section.
- The THEO network behind it: technical support that answers within 3 business hours and an average repair time of 2.1 days across the network, with 87% of cases solved in under 3 days.
- Financing: THEO machines can be leased with down payments from 0% through the UZINEX finance partners.
How to choose the right THEO laser welder
The choice starts from the thickness you weld most often:
- Stainless and steel up to 3 mm (metal furniture, housings, ducting, ventilation): MA1-35.
- 2–4 mm sheet (commercial kitchens, tanks, railings, small batches): MA1-45.
- 3–6 mm steel structures and aluminium for transport: MA1-65.
- 6–8 mm steel, thick aluminium, machinery and marine work: MA1 ULTRA.
For wide gaps or single-pass fillet welds, add the TD1 double wire feeder or the Dual Wire kit, which changes the wire in about 20 seconds. Send us the drawing or a photo of the part and we recommend the model and the consumables before the quote. What to check before buying is also covered in our article on choosing a laser welding machine.
About UZINEX
UZINEX is an industrial equipment integrator headquartered in the Tehnopolis Science Park in Iași, delivering across Romania and the Republic of Moldova: laser cutting systems, laser welding machines, CNC machines, production lines and renewable energy solutions. Every machine ships with transport, commissioning, training and in-house service, with a 60-month warranty. The THEO partnership extends the UZINEX range of welding machines with a family of handheld lasers designed from the laser source to the safety enclosure.
Frequently asked questions
Who distributes THEO handheld laser welders in Romania?
UZINEX is THEO's first distribution partner in Romania. It sells the full THEO range (MA1 laser welders, TM laser cleaning machines, T1 and TD1 wire feeders, the Dual Wire kit, BAY enclosures, VIZ-R helmets, iPRO glasses and the CART trolley), delivers and commissions it, trains the operators and provides service and spare parts.
How much does a THEO laser welder cost?
From €7,182 + VAT for the 800 W THEO MA1-35 to €22,482 + VAT for the 2,000 W THEO MA1 ULTRA. The MA1-45 costs €11,682 + VAT and the MA1-65 €17,982 + VAT. The price includes the T1 wire feeder, delivery and commissioning in Romania and a 60-month warranty.
Do THEO MA1 laser welding machines need a chiller?
No. The MA1 series is fully air-cooled, with three 125 W fans and active temperature control, and works at ambient temperatures up to 45 °C with no water circuit and no antifreeze.
What thickness can a THEO laser welder weld?
Penetration in stainless and carbon steel is 3.5 mm on the MA1-35, 4.5 mm on the MA1-45, 6.5 mm on the MA1-65 and 8.5 mm on the MA1 ULTRA. In aluminium it is 3, 4, 5.5 and 6.5 mm respectively.
How quickly does a welder learn the THEO MA1?
THEO estimates 2 hours of training to the first welds and about two weeks to a proficient operator. Synergic mode proposes the parameters by material, thickness and joint type, and the THEO Toolbox app holds a database of welding parameters for the common combinations.
What warranty and service come with THEO products bought from UZINEX?
A 60-month warranty, with an on-site response within 24 hours in Romania and within 24–72 hours in other countries. Commissioning and training take place in the customer's workshop, and spare parts and consumables (copper nozzles, protective windows, lenses, feed rollers) are ordered through UZINEX.


