60-150 W, glass tube, honeycomb bed and front/back pass-through
| Laser type | CO2 glass tube (per configuration) |
| Laser source power | 60 – 150 W (per configuration) |
| Working area | up to 1,600 × 1,000 mm (model dependent) |
| Working table | Honeycomb + blade, interchangeable |
| Z-axis adjustment | Motorized |
| Material feed (pass-through) | Front/back doors |
| Focus | Automatic (autofocus) |
| Positioning | Red-dot pointer |
| Cooling | Water (dedicated chiller) |
| Assist | Compressed air |
| Control system | Dedicated controller (Ruida or equivalent) |
| Options | Positioning camera, fume extraction |
| Certification | CE |
| Material | Engrave / Cut |
| Wood, plywood, MDF | Engrave and cut |
| Acrylic (PMMA) | Engrave and cut, glossy edge |
| Leather, fabric, paper, cardboard | Engrave and cut |
| Rubber for stamps | Depth engraving |
| Glass, stone, anodized aluminium | Surface engraving only |
The MECVORA CO2 laser engraver, with a 60–150 W glass tube, engraves fine detail and cuts contours in wood, acrylic, leather and paper. The working area reaches 1600 × 1000 mm, the table takes interchangeable honeycomb and blades, and the motorised Z axis with auto focus shortens set-up between materials.
In a production flow, this CO2 laser engraver replaces mechanical engraving, stamping and outsourced services, consolidating personalization and cutting into a single workstation. It fits naturally into any signage, personalization or furniture shop, and completes the range alongside the CO2 laser cutter for rigid materials in the same family.
• Engraving and cutting on one machine, the CO2 laser engraver switches instantly between detailed engraving and contour cutting, so a single unit covers the whole personalization workflow.
• High detail quality, the glass-tube CO2 source and precision optics reproduce fine text, engraved photos and delicate contours with clean edges.
• Interchangeable honeycomb bed, the honeycomb support holds material flat for cutting and lets fumes and light pass through, and the blade bed can be swapped depending on the application.
• Front/back pass-through, front and rear doors let you feed material longer than the table, ideal for signage boards and long panels.
• Autofocus and red dot, autofocus sets the correct distance, and the red-dot pointer shows exactly where the beam will fire for fast alignment.
• Water cooling and air assist, the chiller keeps the tube at a stable temperature for long, reliable life, and the air jet keeps the cut clean and burn-free.
• Low operating cost, a single investment covers both engraving and cutting, the glass tube is an economical light source, and consumables come down to predictable maintenance operations.
• One supplier for the whole flow, installation, training and service from the same team, with no juggling between multiple partners.
| Parameter | Value |
|---|---|
| Laser type | CO2 glass tube (per configuration) |
| Laser source power | 60 – 150 W (per configuration) |
| Working area | up to 1,600 × 1,000 mm (model dependent) |
| Working table | Honeycomb + blade, interchangeable |
| Z-axis adjustment | Motorized |
| Material feed (pass-through) | Front/back doors |
| Focus | Automatic (autofocus) |
| Positioning | Red-dot pointer |
| Cooling | Water (dedicated chiller) |
| Assist | Compressed air |
| Control system | Dedicated controller (Ruida or equivalent) |
| Options | Positioning camera, fume extraction |
| Certification | CE |
A CO2 laser engraver serves signage and display production, personalized objects, gift items, décor, detailed furniture, trophies and rubber stamps. Shops that bring engraving and cutting in-house no longer depend on subcontractors and fully control lead times, with a predictable cost per part.
The solution suits both varied one-off production and small-to-medium series. The machine complies with the applicable requirements for CE-marked industrial equipment, in line with the EU Machinery Directive 2006/42/EC. For automatic textile-roll cutting, see the large-format textile laser cutter in the same family.
In personalization and gift shops, a CO2 laser engraver shortens the path from idea to finished product and delivers profitable small runs with no tooling cost. Signage shops win on cut acrylic letters and engraved plates, and detailed-furniture makers get precise, repeatable ornaments and joints, batch after batch.
Engraving-service providers use a CO2 laser engraver to accept varied jobs, from a single part to small-series production, without turning work away for lack of capacity. Fast switching between engraving and cutting keeps cycle time low even on mixed batches, with different materials on the same table. On a return-on-investment basis, a busy CO2 laser engraver pays for itself fast, since personalized products carry a clearly higher margin than standard ones.
The system engraves and cuts a wide range of non-metal materials. Behaviour depends on power and speed; the values below are indicative and confirmed in the personalized quotation, based on your material.
On wood, acrylic, leather and paper, the laser both engraves and cuts, at different power and speed settings. On materials such as glass, stone or anodized aluminium, the CO2 laser produces quality surface engraving, without cutting through them. This makes it a versatile tool for mixed workshops, where the same machine can brand glassware in the morning and cut acrylic signage in the afternoon.
| Material | Engrave / Cut |
|---|---|
| Wood, plywood, MDF | Engrave and cut |
| Acrylic (PMMA) | Engrave and cut, glossy edge |
| Leather, fabric, paper, cardboard | Engrave and cut |
| Rubber for stamps | Depth engraving |
| Glass, stone, anodized aluminium | Surface engraving only |
The workflow on a CO2 laser engraver is simple and repeatable, from file to finished part:
1. The operator imports the file (vector for cutting or image for engraving) into the control software.
2. Assigns power and speed to each layer, separately for engraving and for cutting.
3. The material is placed on the honeycomb bed, and autofocus sets the correct distance.
4. The red-dot pointer confirms the position, and the operator starts the cycle with one click.
5. The machine engraves the detail and cuts the contour in a single program run.
6. The operator collects the finished parts, ready to assemble, pack or ship.
Because the software stores parameters by material and by layer, repeating a recurring order takes a few clicks, and a new operator quickly reaches consistent results, a real advantage for shops with staff turnover. This also makes planning predictable: you know each job's run time before you start and can commit firm deadlines to customers. For studios juggling many small custom orders, that predictability is often worth as much as the raw speed itself.
• Delivery, installation and commissioning, with operator training on your own production.
• 60-month warranty and service with on-site response in under 24 hours in Romania (24–72 hours in other countries).
• Technical documentation for EU-funded, PNRR and public procurement projects.
Products and services that have earned the appreciation and trust of clients across industry.
with a 3-in-1 laser machine (welding + cleaning + cutting) and a smart capital decision
All delivered equipment meets European quality standards and the DNSH principle, is eligible for acquisitions through EU and PNRR funding, and includes interactive AI-powered manuals for operation, maintenance and operator training.
Media appearances, technical demos and presentations from the most important industrial trade fairs in Europe. See our technology in action.












Over 100 companies in manufacturing, logistics and industry have chosen Uzinex as their strategic partner.
All references→











„We do stainless-steel metal fabrication dedicated to restaurant kitchens. The UZINEX equipment was a radical change: modernization, an increase in production and quality.”
„I had no idea, I was completely clueless. And you started to explain to me. You told me what technologies to choose, what packaging to produce, what would work better on the market.”
„We use a single person who can operate 3-4 machines. Before, we needed 3-4 people to do the same thing.”
„We have multiple challenges in making special structures that serve our systems, and the laser welding machine solution helped us enormously.”
„Laser welding on stainless is something else, it's a completely different thing. The quality of the machines is undeniable: the samples say it all.”
„With Uzinex, I felt very well protected by the assistance they provided. When you have a whole shift stalled and you need someone to answer quickly, it matters enormously.”
„The proof that everything went well is that the equipment now works. We have over three years of experience with no problems. Or when there were issues, there was support. We're satisfied with the collaboration.”
„I can do even 5 boxes for one person, I can also do 10 boxes. Which other firms can't do. That is, they'd have to change dies, set up a whole 12-hour affair.”
„Whether I called at 2 in the morning or at 9 in the morning, the problems got solved. We're satisfied and we'll work together again.”
„A good, smooth collaboration. We always had support and help.”
„We're among the top producers in Romania for this product. I wouldn't have imagined that when I started, but things fell into place.”
„On price and quality ratio, they were the best price and the best quality on the market. We got along well and we're satisfied.”
Six technology directions we integrate turnkey: from plug & play IIoT sensors, to cobots, predictive maintenance, optical inspection, MES connectivity and custom industrial software.
See in real time how much each machine produces and how long it sits idle. We fit sensors on any equipment, new or old, and within a few hours you have the OEE dashboard on your phone. No complex wiring, no production downtime. The first concrete step toward digitalization, with ROI visible from the very first month.
Solve your labor shortage without tripling your costs. The cobot works safely alongside your people (palletizing, feeding the CNC, welding) while you recover the investment in 12-18 months. Prices 30-40% below European distributors, with installation and programming included from us.
Stop waiting for things to break. Our algorithms analyze sensor data and tell you exactly which part will fail and when, and we bring it to your production line before the breakdown. Zero unplanned downtime, zero contractual penalties, complete operational peace of mind.
Eliminate defects before they reach the customer. Our cameras inspect every part at speeds no operator can match, detecting sub-millimeter defects. They mount onto your existing line, with no modifications. Ideal if you produce for export and have strict quality clauses.
Connect your machines to your office, regardless of brand or age. Our gateway automatically translates the data from any machine into your ERP's format: no manual entry, no paper forms, no human error. The manager sees production live, the operator receives digital instructions.
Have a process that no off-the-shelf software can solve? We build custom industrial applications: from tailored SCADA panels and HMI interfaces, to production planning systems, lot traceability and automated reporting. The code is yours, it runs on your servers, with no monthly subscriptions or vendor lock-in.
Answers to the most common technical and commercial questions. Can't find what you're looking for?
Contact the team →Contact our team and receive a personalized offer within a maximum of 24 working hours.